Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.08155

Efficient Fidelity Estimation with Few Local Pauli Measurements

Sun, Mingyu, Gabriel Waite, Michael J. Bremner, Christopher Ferrie

Published Oct 9, 2025• 0 citations
arXivHTMLPDF

Abstract

As quantum devices scale, quantifying how close an experimental state aligns with a target becomes both vital and challenging. Fidelity is the standard metric, but existing estimators either require full tomography or apply only to restricted state/measurement families. Huang, Preskill, and Soleimanifar (Nature Physics, 2025) introduced an efficient certification protocol for Haar-random states using only a polynomial number of non-adaptive, single-copy, local Pauli measurements. Here, we adopt the same data collection routine but recast it as a fidelity estimation protocol with rigorous performance guarantees and broaden its applicability. We analyze the bias in this estimator, linking its performance to the mixing time $τ$ of a Markov chain induced by the target state, and resolve the three open questions posed by Huang, Preskill, and Soleimanifar (Nature Physics, 2025). Our analysis extends beyond Haar-random states to state $t$-designs, states prepared by low-depth random circuits, physically relevant states and families of mixed states. We introduce a $k$-generalized local escape property that identifies when the fidelity estimation protocol is both efficient and accurate, and design a practical empirical test to verify its applicability for arbitrary states. This work enables scalable benchmarking, error characterization, and tomography assistance, supports adaptive quantum algorithms in high dimensions, and clarifies fundamental limits of learning from local measurements.

DOI
10.48550/arxiv.2510.08155

Related papers

Sampling Groups of Pauli Operators to Enhance Direct Fidelity Estimation

Júlia Barberà-Rodríguez, Mariana Navarro, Leonardo Zambrano

Direct fidelity estimation is a protocol that estimates the fidelity between an experimental quantum state and a target pure state. By measuring the expectation values of Pauli operators selected through importance sampling, the method is exponentially faster than full quantum state tomography. We propose an enhanced direct fidelity estimation protocol that uses fewer copies of the experimental state by grouping Pauli operators before the sampling process. We derive analytical bounds on the measurement cost and estimator variance, showing improvements over the standard method. Numerical simulations validate our approach, demonstrating that for 8-qubit Haar-random states, our method achieves a one-third reduction in the required number of copies and reduces variance by an order of magnitude using only local measurements. These results underscore the potential of our protocol to enhance the efficiency of fidelity estimation in current quantum devices.

arXiv:2501.19228•Quantum•Jul 3, 2025•3 citations

Practical Fidelity Estimation for Noisy Quantum Devices Using Direct and Survival-Probability-Based Protocols

Ahmed Aman, Kaustav Chatterjee, Younes Javanmard +1 more

Reliable characterization of quantum states and quantum processes is central to the development of scalable quantum computing. Standard characterization techniques such as full quantum state tomography become rapidly impractical as system size increases. In this work we present two software-oriented fidelity estimation protocols that avoid full tomographic reconstruction while remaining experimentally relevant for noisy intermediate-scale quantum devices. The first protocol is direct fidelity estimation (DFE), where the fidelity between a target state and an experimentally prepared state is estimated from importance-sampled Pauli measurements. The second protocol is a survival-probability-based method that reconstructs fidelity from experimentally accessible moments of a noisy evolution and its approximate inverse, and is intrinsically robust against state-preparation-and-measurement (SPAM) errors. We discuss the theoretical basis of both approaches, analyze their noise sensitivity, and present numerical evidence on representative multiqubit states under depolarizing, dephasing, and amplitude-damping channels. For DFE we show that attenuation-aware correction improves robustness against measurement noise. For the survival-probability approach we show that an $L_2$-optimized expansion substantially outperforms naive Taylor truncation in high-noise regimes.

quant-pharXiv:2610.21606•Oct 16, 2026•0 citations

Fidelity Estimation of Entangled Measurements with Local States

Zanqiu Shen, Kun Wang

We propose an efficient protocol to estimate the fidelity of an $n$-qubit entangled measurement device, requiring only qubit state preparations and classical data post-processing. It works by measuring the eigenstates of Pauli operators, which are strategically selected according to their importance weights and collectively contributed by all measurement operators. We rigorously analyze the protocol's performance and demonstrate that its sample complexity is uniquely determined by the number of Pauli operators possessing non-zero expectation values with respect to the target measurement. Moreover, from a resource-theoretic perspective, we introduce the stabilizer Rényi entropy of quantum measurements as a precise metric to quantify the inherent difficulty of estimating measurement fidelity.

arXiv:2312.13730•Dec 21, 2023•0 citations

Operator-aware shadow importance sampling for accurate fidelity estimation

Hyunho Cha, Sangwoo Hong, Jungwoo Lee

Estimating the fidelity between an unknown quantum state and a fixed target is a fundamental task in quantum information science. Direct fidelity estimation (DFE) enables this without full tomography by sampling observables according to a target-dependent distribution. However, existing approaches face notable trade-offs. Grouping-based DFE achieves strong accuracy for small systems but suffers from exponential scaling, and its applicability is restricted to Pauli measurements. In contrast, classical-shadow-based DFE offers scalability but yields lower accuracy on structured states. In this work, we address these limitations by developing two classes of operator-aware shadow importance sampling algorithms using informationally overcomplete positive operator-valued measures. Instantiated with local Pauli measurements, our algorithm improves upon the grouping-based algorithms for Haar-random states. For structured states such as the GHZ and W states, our algorithm also eliminates the exponential memory requirements of previous grouping-based methods. Numerical experiments confirm that our methods achieve state-of-the-art performance across Haar-random, GHZ, and W targets.

quant-pharXiv:2511.01608•Physical Review A•Nov 4, 2025•0 citations

Direct Fidelity Estimation from Few Pauli Measurements

Steven T. Flammia, Yi-Kai Liu

We describe a simple method for certifying that an experimental device prepares a desired quantum state ρ. Our method is applicable to any pure state ρ, and it provides an estimate of the fidelity between ρ and the actual (arbitrary) state in the lab, up to a constant additive error. The method requires measuring only a constant number of Pauli expectation values, selected at random according to an importance-weighting rule. Our method is faster than full tomography by a factor of d, the dimension of the state space, and extends easily and naturally to quantum channels.

arXiv:1104.4695•Physical Review Letters•Jun 8, 2011•463 citations

Sample- and Hardware-Efficient Fidelity Estimation by Stripping Phase-Dominated Magic

Guedong Park, Jaekwon Chang, Yosep Kim +2 more

Direct fidelity estimation (DFE) is a famous tool for estimating the fidelity with a target pure state. However, such a method generally requires exponentially many sampling copies due to the large magic of the target state. This work proposes a sample- and gate-efficient fidelity estimation algorithm that is affordable within feasible quantum devices. We show that the fidelity estimation with pure states close to the structure of phase states, for which sample-efficient DFE is limited by their strong entanglement and magic, can be done by using $\mathcal{O}({\rm poly}(n))$ sampling copies, with a single $n$-qubit fan-out gate. As the target state becomes a phase state, the sampling complexity reaches $\mathcal{O}(1)$. Such a drastic improvement stems from a crucial step in our scheme, the so-called phase stripping, which can significantly reduce the target-state magic. Furthermore, we convert a complex diagonal gate resource, which is needed to design a phase-stripping-adapted algorithm, into nonlinear classical post-processing of Pauli measurements so that we only require a single fan-out gate. Additionally, as another variant using the nonlinear post-processing, we propose a nonlinear extension of the conventional DFE scheme. Here, the sampling reduction compared to DFE is also guaranteed, while preserving the Pauli measurement as the only circuit resource. We expect our work to contribute to establishing noise-resilient quantum algorithms by enabling a significant reduction in sampling overhead for fidelity estimation under the restricted gate resources, and ultimately to clarifying a fundamental gap between the resource overhead required to understand complex physical properties and that required to generate them.

quant-pharXiv:2602.09710•Feb 11, 2026•0 citations
As quantum devices scale, quantifying how close an experimental state aligns with a target becomes both vital and challenging. Fidelity is the standard metric, but existing estimators either require full tomography or apply only to restricted state/measurement families. Huang, Preskill, and Soleimanifar (Nature Physics, 2025) introduced an efficient certification protocol for Haar-random states using only a polynomial number of non-adaptive, single-copy, local Pauli measurements. Here, we adopt the same data collection routine but recast it as a fidelity estimation protocol with rigorous performance guarantees and broaden its applicability. We analyze the bias in this estimator, linking its performance to the mixing time τττ of a Markov chain induced by the target state, and resolve the three open questions posed by Huang, Preskill, and Soleimanifar (Nature Physics, 2025). Our analysis extends beyond Haar-random states to state ttt-designs, states prepared by low-depth random circuits, physically relevant states and families of mixed states. We introduce a kkk-generalized local escape property that identifies when the fidelity estimation protocol is both efficient and accurate, and design a practical empirical test to verify its applicability for arbitrary states. This work enables scalable benchmarking, error characterization, and tomography assistance, supports adaptive quantum algorithms in high dimensions, and clarifies fundamental limits of learning from local measurements.
Direct fidelity estimation is a protocol that estimates the fidelity between an experimental quantum state and a target pure state. By measuring the expectation values of Pauli operators selected through importance sampling, the method is exponentially faster than full quantum state tomography. We propose an enhanced direct fidelity estimation protocol that uses fewer copies of the experimental state by grouping Pauli operators before the sampling process. We derive analytical bounds on the measurement cost and estimator variance, showing improvements over the standard method. Numerical simulations validate our approach, demonstrating that for 8-qubit Haar-random states, our method achieves a one-third reduction in the required number of copies and reduces variance by an order of magnitude using only local measurements. These results underscore the potential of our protocol to enhance the efficiency of fidelity estimation in current quantum devices.
Reliable characterization of quantum states and quantum processes is central to the development of scalable quantum computing. Standard characterization techniques such as full quantum state tomography become rapidly impractical as system size increases. In this work we present two software-oriented fidelity estimation protocols that avoid full tomographic reconstruction while remaining experimentally relevant for noisy intermediate-scale quantum devices. The first protocol is direct fidelity estimation (DFE), where the fidelity between a target state and an experimentally prepared state is estimated from importance-sampled Pauli measurements. The second protocol is a survival-probability-based method that reconstructs fidelity from experimentally accessible moments of a noisy evolution and its approximate inverse, and is intrinsically robust against state-preparation-and-measurement (SPAM) errors. We discuss the theoretical basis of both approaches, analyze their noise sensitivity, and present numerical evidence on representative multiqubit states under depolarizing, dephasing, and amplitude-damping channels. For DFE we show that attenuation-aware correction improves robustness against measurement noise. For the survival-probability approach we show that an L2L_2L2​-optimized expansion substantially outperforms naive Taylor truncation in high-noise regimes.
We propose an efficient protocol to estimate the fidelity of an nnn-qubit entangled measurement device, requiring only qubit state preparations and classical data post-processing. It works by measuring the eigenstates of Pauli operators, which are strategically selected according to their importance weights and collectively contributed by all measurement operators. We rigorously analyze the protocol's performance and demonstrate that its sample complexity is uniquely determined by the number of Pauli operators possessing non-zero expectation values with respect to the target measurement. Moreover, from a resource-theoretic perspective, we introduce the stabilizer Rényi entropy of quantum measurements as a precise metric to quantify the inherent difficulty of estimating measurement fidelity.
Estimating the fidelity between an unknown quantum state and a fixed target is a fundamental task in quantum information science. Direct fidelity estimation (DFE) enables this without full tomography by sampling observables according to a target-dependent distribution. However, existing approaches face notable trade-offs. Grouping-based DFE achieves strong accuracy for small systems but suffers from exponential scaling, and its applicability is restricted to Pauli measurements. In contrast, classical-shadow-based DFE offers scalability but yields lower accuracy on structured states. In this work, we address these limitations by developing two classes of operator-aware shadow importance sampling algorithms using informationally overcomplete positive operator-valued measures. Instantiated with local Pauli measurements, our algorithm improves upon the grouping-based algorithms for Haar-random states. For structured states such as the GHZ and W states, our algorithm also eliminates the exponential memory requirements of previous grouping-based methods. Numerical experiments confirm that our methods achieve state-of-the-art performance across Haar-random, GHZ, and W targets.
We describe a simple method for certifying that an experimental device prepares a desired quantum state ρ. Our method is applicable to any pure state ρ, and it provides an estimate of the fidelity between ρ and the actual (arbitrary) state in the lab, up to a constant additive error. The method requires measuring only a constant number of Pauli expectation values, selected at random according to an importance-weighting rule. Our method is faster than full tomography by a factor of d, the dimension of the state space, and extends easily and naturally to quantum channels.
Direct fidelity estimation (DFE) is a famous tool for estimating the fidelity with a target pure state. However, such a method generally requires exponentially many sampling copies due to the large magic of the target state. This work proposes a sample- and gate-efficient fidelity estimation algorithm that is affordable within feasible quantum devices. We show that the fidelity estimation with pure states close to the structure of phase states, for which sample-efficient DFE is limited by their strong entanglement and magic, can be done by using O(poly(n))\mathcal{O}({\rm poly}(n))O(poly(n)) sampling copies, with a single nnn-qubit fan-out gate. As the target state becomes a phase state, the sampling complexity reaches O(1)\mathcal{O}(1)O(1). Such a drastic improvement stems from a crucial step in our scheme, the so-called phase stripping, which can significantly reduce the target-state magic. Furthermore, we convert a complex diagonal gate resource, which is needed to design a phase-stripping-adapted algorithm, into nonlinear classical post-processing of Pauli measurements so that we only require a single fan-out gate. Additionally, as another variant using the nonlinear post-processing, we propose a nonlinear extension of the conventional DFE scheme. Here, the sampling reduction compared to DFE is also guaranteed, while preserving the Pauli measurement as the only circuit resource. We expect our work to contribute to establishing noise-resilient quantum algorithms by enabling a significant reduction in sampling overhead for fidelity estimation under the restricted gate resources, and ultimately to clarifying a fundamental gap between the resource overhead required to understand complex physical properties and that required to generate them.