Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.05473 · Physical Review Materials

Cryogenic growth of aluminum: Structural morphology, optical properties, superconductivity, and microwave dielectric loss

Wilson Yanez, Teun A. J. van Schijndel, Anthony McFadden, Kaixuan Ji, Susheng Tan, Yu Wu, Sergey Frolov, Stefan Zollner, Raymond W. Simmonds, C. J. Palmstrøm

Published Apr 13, 2026• 0 citations
arXivHTMLPDF

Abstract

We explore the molecular beam epitaxy synthesis of superconducting aluminum thin films grown on c-plane sapphire substrates at cryogenic temperatures of 6 K and compare their behavior with films synthesized at room temperature. We demonstrate that cryogenic growth increases structural disorder, producing crystalline grains that modify the optical, electrical, and superconducting properties of aluminum. We observe that cryogenic deposition changes the color of aluminum from fully reflective to yellow and correlate the pseudodielectric function and reflectance with structural changes in the film. We find that smaller grain sizes enhance the superconductivity of aluminum, increasing its critical temperature and critical field. We then estimate the superconducting gap and coherence length of Cooper pairs in aluminum in the presence of disorder. Finally, we fabricate superconducting microwave resonators on these films and find that, independently of the growth temperature, the system is dominated by two-level system loss with similar quality factors in the high- and low-power regimes. We further measure a higher kinetic inductance in the cryogenically grown films.

DOI
10.1103/7kzr-571v

Related papers

Cryogenic growth of tantalum thin films for low-loss superconducting circuits

Teun A. J. van Schijndel, Anthony McFadden, Aaron N. Engel +5 more

Motivated by recent advancements highlighting $\mathrm{Ta}$ as a promising material in low-loss superconducting circuits and showing long coherence times in superconducting qubits, we have explored the effect of cryogenic temperatures on the growth of $\mathrm{Ta}$ and its integration in superconducting circuits. Cryogenic growth of $\mathrm{Ta}$ using a low-temperature molecular beam epitaxy (MBE) system is found to stabilize single-phase $\ensuremath{\alpha}$-$\mathrm{Ta}$ on several different substrates, which include ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)$, $\mathrm{Si}$(001), $\mathrm{Si}$(111), ${\mathrm{Si}\mathrm{N}}_{x}$, and $\mathrm{Ga}\mathrm{As}$(001). The substrates are actively cooled down to cryogenic temperatures and remain 20 K during the $\mathrm{Ta}$ deposition. X-ray $\ensuremath{\theta}$-$2\ensuremath{\theta}$ diffraction (XRD) after warming to room temperature indicates the formation of polycrystalline $\ensuremath{\alpha}$-$\mathrm{Ta}$. The 50-nm $\ensuremath{\alpha}$-$\mathrm{Ta}$ films grown on ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)$ at a substrate manipulator temperature of 7 K have a room temperature resistivity (${\ensuremath{\rho}}_{300\phantom{\rule{0.1em}{0ex}}\mathrm{K}}$) of $13.4\phantom{\rule{0.1em}{0ex}}\text{\ensuremath{\mu}}\mathrm{\ensuremath{\Omega}}\phantom{\rule{0.2em}{0ex}}\mathrm{cm}$, a residual resistivity ratio (RRR) of 17.3 and a superconducting transition temperature (${T}_{C}$) of 4.14 K, which are comparable to bulk values. In addition, atomic force microscopy (AFM) indicates that the film grown at 7 K with an rms roughness of 0.45 nm was significantly smoother than the one grown at room temperature. Similar properties are found for films grown on other substrates. Results for films grown at higher substrate manipulator temperatures show higher ${\ensuremath{\rho}}_{300\phantom{\rule{0.1em}{0ex}}\mathrm{K}}$, lower RRR and $\mathrm{Tc}$, and increased $\ensuremath{\beta}$-$\mathrm{Ta}$ content. Coplanar waveguide resonators with a gap width of $3\phantom{\rule{0.1em}{0ex}}\text{\ensuremath{\mu}}\mathrm{m}$ fabricated from cryogenically grown $\mathrm{Ta}$ on $\mathrm{Si}$(111) and ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)$ show low-power ${Q}_{i}$ of 1.9 million and 0.7 million, respectively, indicating polycrystalline $\ensuremath{\alpha}$-$\mathrm{Ta}$ films may be promising for superconducting qubit applications even though they are not fully epitaxial.

arXiv:2405.12417•Physical Review Applied•Mar 12, 2025•15 citations

The effect of niobium thin film structure on losses in superconducting circuits

Maxwell Drimmer, Sjoerd Telkamp, Felix L. Fischer +7 more

The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over one million at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and demonstrate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.

arXiv:2403.12164•Mar 18, 2024•5 citations

The effect of niobium thin film structure on losses in superconducting circuits

Maxwell Drimmer, Sjoerd Telkamp, Felix L Fischer +7 more

Abstract The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10 6 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.

Materials for Quantum Technology•Oct 14, 2025•4 citations

The effect of niobium thin film structure on losses in superconducting circuits

Maxwell Drimmer, Sjoerd Telkamp, Felix L. Fischer +7 more

The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975K. The lowest-loss resonators that we measure have quality factors of over 106 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.

•Nov 5, 2025•0 citations

Interface-sensitive microwave loss in superconducting tantalum films sputtered on c-plane sapphire

Anthony McFadden, Trevyn F. Q. Larson, Stephen Gill +5 more

Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss are still not well understood. Here we present a systematic study of the structural and electrical properties of Ta and Nb films sputtered on c-plane sapphire at varying growth temperatures. As growth temperature is increased, our results show that the onset of epitaxial growth of alpha-phase Ta correlates with lower Ta surface roughness, higher critical temperature, and higher residual resistivity ratio, but surprisingly also correlates with a significant increase in loss at microwave frequency. Notably, this high level of loss is not observed in Nb films prepared in the same way and having very similar structure. By experimentally controlling the surface on which the Ta film is nucleated, we determine that the source of loss is only present in samples having an epitaxial Ta/sapphire interface and show that it is apparently mitigated by either growing a thin, epitaxial Nb inter-layer between the Ta film and the substrate or by intentionally treating, and effectively damaging, the sapphire surface with an in-situ argon plasma before Ta growth. In addition to elucidating this interfacial microwave loss, this work provides adequate process details to aid reproducible growth of low-loss Ta films across fabrication facilities.

arXiv:2412.16730•Physical Review Materials•Sep 25, 2025•3 citations

Nanometer-thick molecular beam epitaxy Al films capped with in situ deposited Al2O3—High-crystallinity, morphology, and superconductivity

Y.H. Lin, C. K. Cheng, L. B. Young +11 more

Achieving high material perfection in aluminum (Al) films and their associated Al/AlOx heterostructures is essential for enhancing the coherence time in superconducting quantum circuits. We grew Al films with thicknesses ranging from 3 to 30 nanometers (nm) epitaxially on sapphire substrates using molecular beam epitaxy (MBE). An integral aspect of our work involved electron-beam (e-beam) evaporation to directly deposit aluminum oxide (Al2O3) films on the freshly grown ultrathin epitaxial Al films in an ultra-high-vacuum (UHV) environment. This in situ oxide deposition is critical for preventing the oxidation of parts of the Al films, avoiding the formation of undesired native oxides, and thereby preserving the nm-thick Al films in their pristine conditions. The thicknesses of our Al films in the study were accurately determined; for example, coherence lengths of 3.0 and 20.2 nm were measured in the nominal 3.0 and 20 nm thick Al films, respectively. These Al films were epitaxially grown on sapphire substrates, showing an orientational relationship, denoted as Al(111)⟨21¯1¯⟩∥sapphire(0001)[21¯1¯0]. The Al/sapphire interface was atomically ordered without any interfacial layers, as confirmed by in situ reflection high-energy electron diffraction (RHEED) and cross-sectional scanning transmission electron microscopy (STEM). All sample surfaces exhibited smoothness with a roughness in the range of 0.1–0.2 nm. The Al films are superconducting with critical temperatures ranging from 1.23 to around 2 K, depending on the film thickness.

Journal of Applied Physics•Aug 15, 2024•4 citations
We explore the molecular beam epitaxy synthesis of superconducting aluminum thin films grown on c-plane sapphire substrates at cryogenic temperatures of 6 K and compare their behavior with films synthesized at room temperature. We demonstrate that cryogenic growth increases structural disorder, producing crystalline grains that modify the optical, electrical, and superconducting properties of aluminum. We observe that cryogenic deposition changes the color of aluminum from fully reflective to yellow and correlate the pseudodielectric function and reflectance with structural changes in the film. We find that smaller grain sizes enhance the superconductivity of aluminum, increasing its critical temperature and critical field. We then estimate the superconducting gap and coherence length of Cooper pairs in aluminum in the presence of disorder. Finally, we fabricate superconducting microwave resonators on these films and find that, independently of the growth temperature, the system is dominated by two-level system loss with similar quality factors in the high- and low-power regimes. We further measure a higher kinetic inductance in the cryogenically grown films.
Motivated by recent advancements highlighting Ta\mathrm{Ta}Ta as a promising material in low-loss superconducting circuits and showing long coherence times in superconducting qubits, we have explored the effect of cryogenic temperatures on the growth of Ta\mathrm{Ta}Ta and its integration in superconducting circuits. Cryogenic growth of Ta\mathrm{Ta}Ta using a low-temperature molecular beam epitaxy (MBE) system is found to stabilize single-phase $\ensuremath{\alpha}$-Ta\mathrm{Ta}Ta on several different substrates, which include Al2O3(0001){\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)Al2​O3​(0001), Si\mathrm{Si}Si(001), Si\mathrm{Si}Si(111), SiNx{\mathrm{Si}\mathrm{N}}_{x}SiNx​, and GaAs\mathrm{Ga}\mathrm{As}GaAs(001). The substrates are actively cooled down to cryogenic temperatures and remain 20 K during the Ta\mathrm{Ta}Ta deposition. X-ray $\ensuremath{\theta}$-$2\ensuremath{\theta}$ diffraction (XRD) after warming to room temperature indicates the formation of polycrystalline $\ensuremath{\alpha}$-Ta\mathrm{Ta}Ta. The 50-nm $\ensuremath{\alpha}$-Ta\mathrm{Ta}Ta films grown on Al2O3(0001){\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)Al2​O3​(0001) at a substrate manipulator temperature of 7 K have a room temperature resistivity (${\ensuremath{\rho}}_{300\phantom{\rule{0.1em}{0ex}}\mathrm{K}}$) of $13.4\phantom{\rule{0.1em}{0ex}}\text{\ensuremath{\mu}}\mathrm{\ensuremath{\Omega}}\phantom{\rule{0.2em}{0ex}}\mathrm{cm}$, a residual resistivity ratio (RRR) of 17.3 and a superconducting transition temperature (TC{T}_{C}TC​) of 4.14 K, which are comparable to bulk values. In addition, atomic force microscopy (AFM) indicates that the film grown at 7 K with an rms roughness of 0.45 nm was significantly smoother than the one grown at room temperature. Similar properties are found for films grown on other substrates. Results for films grown at higher substrate manipulator temperatures show higher ${\ensuremath{\rho}}_{300\phantom{\rule{0.1em}{0ex}}\mathrm{K}}$, lower RRR and Tc\mathrm{Tc}Tc, and increased $\ensuremath{\beta}$-Ta\mathrm{Ta}Ta content. Coplanar waveguide resonators with a gap width of $3\phantom{\rule{0.1em}{0ex}}\text{\ensuremath{\mu}}\mathrm{m}$ fabricated from cryogenically grown Ta\mathrm{Ta}Ta on Si\mathrm{Si}Si(111) and Al2O3(0001){\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)Al2​O3​(0001) show low-power Qi{Q}_{i}Qi​ of 1.9 million and 0.7 million, respectively, indicating polycrystalline $\ensuremath{\alpha}$-Ta\mathrm{Ta}Ta films may be promising for superconducting qubit applications even though they are not fully epitaxial.
The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over one million at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and demonstrate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.
Abstract The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10 6 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.
The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975K. The lowest-loss resonators that we measure have quality factors of over 106 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.
Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss are still not well understood. Here we present a systematic study of the structural and electrical properties of Ta and Nb films sputtered on c-plane sapphire at varying growth temperatures. As growth temperature is increased, our results show that the onset of epitaxial growth of alpha-phase Ta correlates with lower Ta surface roughness, higher critical temperature, and higher residual resistivity ratio, but surprisingly also correlates with a significant increase in loss at microwave frequency. Notably, this high level of loss is not observed in Nb films prepared in the same way and having very similar structure. By experimentally controlling the surface on which the Ta film is nucleated, we determine that the source of loss is only present in samples having an epitaxial Ta/sapphire interface and show that it is apparently mitigated by either growing a thin, epitaxial Nb inter-layer between the Ta film and the substrate or by intentionally treating, and effectively damaging, the sapphire surface with an in-situ argon plasma before Ta growth. In addition to elucidating this interfacial microwave loss, this work provides adequate process details to aid reproducible growth of low-loss Ta films across fabrication facilities.
Achieving high material perfection in aluminum (Al) films and their associated Al/AlOx heterostructures is essential for enhancing the coherence time in superconducting quantum circuits. We grew Al films with thicknesses ranging from 3 to 30 nanometers (nm) epitaxially on sapphire substrates using molecular beam epitaxy (MBE). An integral aspect of our work involved electron-beam (e-beam) evaporation to directly deposit aluminum oxide (Al2O3) films on the freshly grown ultrathin epitaxial Al films in an ultra-high-vacuum (UHV) environment. This in situ oxide deposition is critical for preventing the oxidation of parts of the Al films, avoiding the formation of undesired native oxides, and thereby preserving the nm-thick Al films in their pristine conditions. The thicknesses of our Al films in the study were accurately determined; for example, coherence lengths of 3.0 and 20.2 nm were measured in the nominal 3.0 and 20 nm thick Al films, respectively. These Al films were epitaxially grown on sapphire substrates, showing an orientational relationship, denoted as Al(111)⟨21¯1¯⟩∥sapphire(0001)[21¯1¯0]. The Al/sapphire interface was atomically ordered without any interfacial layers, as confirmed by in situ reflection high-energy electron diffraction (RHEED) and cross-sectional scanning transmission electron microscopy (STEM). All sample surfaces exhibited smoothness with a roughness in the range of 0.1–0.2 nm. The Al films are superconducting with critical temperatures ranging from 1.23 to around 2 K, depending on the film thickness.