Abstract The quantum transduction, or equivalently quantum frequency conversion, is vital for realizing, e.g., quantum networks and distributed quantum computing. The microwave-to-optical quantum transduction is of interest in the field of superconducting quantum computing, since interconnecting dilution refrigerators is considered inevitable for realizing large-scale quantum computers with fault-tolerance. In this review, we overview recent theoretical and experimental studies on the quantum transduction between microwave and optical photons. We describe a generic theory for the quantum transduction employing the input-output formalism, from which the essential quantities characterizing the transduction, i.e., expressions for the transduction efficiency, added noise, and transduction bandwidth, are derived. We review major transduction methods that have been experimentally demonstrated, including the optomechanical, electro-optic, and ensemble-based transducers. We also briefly review recent experiments on the quantum transduction from superconducting qubit to optical photon, which is an important step toward quantum state transfer between distant superconducting qubits interconnected over optical fibers.
Abstract The quantum transduction, or equivalently quantum frequency conversion, is vital for realizing, e.g., quantum networks and distributed quantum computing. The microwave-to-optical quantum transduction is of interest in the field of superconducting quantum computing, since interconnecting dilution refrigerators is considered inevitable for realizing large-scale quantum computers with fault-tolerance. In this review, we overview recent theoretical and experimental studies on the quantum transduction between microwave and optical photons. We describe a generic theory for the quantum transduction employing the input-output formalism, from which the essential quantities characterizing the transduction, i.e., expressions for the transduction efficiency, added noise, and transduction bandwidth, are derived. We review major transduction methods that have been experimentally demonstrated, including the optomechanical, electro-optic, and ensemble-based transducers. We also briefly review recent experiments on the quantum transduction from superconducting qubit to optical photon, which is an important step toward quantum state transfer between distant superconducting qubits interconnected over optical fibers.
The quantum transduction, or equivalently quantum frequency conversion, between microwave and optical photons is essential for realizing scalable quantum computers with superconducting qubits. Due to the large frequency difference between microwave and optical ranges, the transduction needs to be done via intermediate bosonic modes or nonlinear processes. Regarding the transduction mediated by magnons, previous studies have so far utilized ferromagnetic magnons in ferromagnets. Here, we formulate a theory for the microwave-to-optical quantum transduction mediated by antiferromagnetic magnons in antiferromagnets. We derive analytical expressions for the transduction efficiency in the cases with and without an optical cavity, where a microwave cavity is used in both cases. In contrast to the case of the quantum transduction using ferromagnets, we find that the quantum transduction can occur even in the absence of an external static magnetic field. We also find that, in the case with an optical cavity the transduction efficiency takes a peak structure with respect to the sample thickness, indicating that there exists an optimal thickness, whereas in the case without an optical cavity the transduction efficiency is a monotonically increasing function of the sample thickness. Our study opens up a way for possible applications of antiferromagnetic materials in future quantum interconnects.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−10 to 10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
Superconducting quantum circuits are a leading hardware candidate for realizing a large-scale fault-tolerant quantum computer. However, scaling superconducting quantum computers will soon approach the physical limits imposed by their cryogenic operating environments. Consequently, interconnects between multiple processor modules will become increasingly necessary for scaling quantum computers. Optical fiber is a particularly promising candidate for these interconnects due to its low loss and negligible thermal noise at room temperature. However, interfacing microwave-frequency superconducting circuits with optical fibers presents several challenges. In this thesis, we present a modular architecture which addresses many of the current challenges in building this interface. We develop an optomechanical quantum transducer which is capable of generating microwave- and optical-frequency photons in pairs, and demonstrate quantum entanglement between these microwave-optical photon pairs. Further, we develop a superconducting qubit module optimized for efficient absorption of itinerant microwave photons, and demonstrate a high-efficiency photon catch protocol. Finally, we connect the superconducting qubit module to the transducer module via a superconducting microwave cable. We drive the microwave-optical photon pair generation process in the transducer module and employ the photon catch protocol in the qubit module to facilitate state transfer between the qubit and the flying microwave photon from the transducer. We observe correlations between the final qubit state and the detection of an optical photon, demonstrating a crucial step toward establishing quantum entanglement between superconducting qubits and light. We discuss ongoing progress and challenges in realizing hybrid entanglement and in extending this approach to entangle remote superconducting qubits over optical networks.
Quantum frequency conversion between superconducting (SC) microwave qubits and telecom optical photons is critical for long distance communication of networked SC quantum processors. While SC qubits operate at cryogenic temperatures to sustain their quantum coherence, converting them to the optical domain enables transferring the quantum states to room temperature and over long distances. For such a quantum state transduction process, several schemes have been investigated, including optomechanics, magnons, piezomechanics, and Pockels electro-optics (EO). The EO conversion approach is particularly attractive since it is broadband, low noise, mechanically and thermally stable (i.e., does not rely on freestanding structures), scalable (largescale integration of EO devices with superconducting circuits is possible), and tunable (e.g., using bias voltages). In this presentation we review our progress in an electro-optic based quantum transduction and discuss the promises and challenges.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.
Abstract Optical quantum networks can connect distant quantum processors to enable secure quantum communication and distributed quantum computing. Superconducting qubits are a leading technology for quantum information processing but cannot couple to long-distance optical networks without an efficient, coherent, and low noise interface between microwave and optical photons. Here, we demonstrate a microwave-to-optical transducer using an ensemble of erbium ions that is simultaneously coupled to a superconducting microwave resonator and a nanophotonic optical resonator. The coherent atomic transitions of the ions mediate the frequency conversion from microwave photons to optical photons and using photon counting we observed device conversion efficiency approaching 10 −7 . With pulsed operation at a low duty cycle, the device maintained a spin temperature below 100 mK and microwave resonator heating of less than 0.15 quanta.