Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.24213

Quantum Approximate Optimization Algorithm: Performance on Simulators and Quantum Hardware

Abyan Khabir Irfan, Chansu Yu

Published Sep 29, 2025• 0 citations
arXivHTMLPDF

Abstract

Running quantum circuits on quantum computers does not always generate "clean" results, unlike on a simulator, as noise plays a significant role in any quantum device. To explore this, we experimented with the Quantum Approximate Optimization Algorithm (QAOA) on quantum simulators and real quantum hardware. QAOA is a hybrid classical-quantum algorithm and requires hundreds or thousands of independent executions of the quantum circuit for optimization, which typically goes beyond the publicly available resources for quantum computing. We were granted access to the IBM Quantum System One at the Cleveland Clinic, the first on-premises IBM system in the U.S. This paper explores different optimization methods, techniques, and error mitigation methods to observe how they react to quantum noise differently, which is helpful for other researchers to understand the complexities of running QAOA on real quantum hardware and the challenges faced in dealing with noise.

DOI
10.48550/arxiv.2509.24213

Related papers

Design-Space Exploration of Quantum Approximate Optimization Algorithm under Noise

Mahabubul Alam, Abdullah Ash Saki, Swaroop Ghosh

Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve NP-hard problems in near-term gate-based noisy quantum devices. In QAOA, the gate parameters of a parameterized quantum circuit (PQC) are varied by a classical optimizer to generate a quantum state with a significant support to the optimal solution. The existing analysis fails to consider nonidealities in the qubit quality i.e., short lifetime and imperfect gate operations in a realistic quantum hardware. In this article, we study the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analysis indicates that QAOA performance is noise-sensitive (especially higher-depth QAOA instances). Therefore, the optimal number of stages (p-value) for any QAOA instance is limited by the noise in the target hardware as opposed to the current perception that QAOA will provide monotonically better performance with higher-depth. We show that the two-qubit gate error has to be decreased by more than 75% of the current state-of-the-art levels to attain a performance within 10% of the maximum value for the lowest-depth QAOA.

Custom Integrated Circuits Conference•Mar 1, 2020•28 citations

Analysis of Quantum Approximate Optimization Algorithm under Realistic Noise in Superconducting Qubits

Mahabubul Alam, Abdullah Ash Saki, Swaroop Ghosh

The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.

arXiv:1907.09631•Jul 13, 2019•33 citations

Large-scale quantum approximate optimization on nonplanar graphs with machine learning noise mitigation

Stefan H. Sack, Daniel J. Egger

Quantum computers are increasing in size and quality but are still very noisy. Error mitigation extends the size of the quantum circuits that noisy devices can meaningfully execute. However, state-of-the-art error mitigation methods are hard to implement and the limited qubit connectivity in superconducting qubit devices restricts most applications to the hardware's native topology. Here we show a quantum approximate optimization algorithm (QAOA) on nonplanar random regular graphs with up to 40 nodes enabled by a machine learning-based error mitigation. We use a swap network with careful decision-variable-to-qubit mapping and a feed-forward neural network to optimize a depth-two QAOA on up to 40 qubits. We observe a meaningful parameter optimization for the largest graph which requires running quantum circuits with 958 two-qubit gates. Our paper emphasizes the need to mitigate samples, and not only expectation values, in quantum approximate optimization. These results are a step towards executing quantum approximate optimization at a scale that is not classically simulable. Reaching such system sizes is key to properly understanding the true potential of heuristic algorithms like QAOA. Published by the American Physical Society 2024

arXiv:2307.14427•Physical Review Research•Mar 1, 2024•39 citations

Strategies for Noise-Resilient Quantum Approximate Optimization Algorithms: A Review and Classification of Error Mitigation

Kimchhor Chiv, Leanghok Hour, Sanghyeon Lee +3 more

The Quantum Approximate Optimization Algorithm (QAOA) is a leading candidate for solving combinatorial optimization problems on near-term quantum hardware. However, its practical deployment remains severely limited by hardware-induced noise and decoherence. In the absence of full fault tolerance, Quantum Error Mitigation (QEM) techniques offer a viable approach to enhance QAOA performance on noisy intermediate-scale quantum (NISQ) devices. In this work, we present a unified classification of QEM strategies specifically tailored for QAOA, systematically categorized into preprocessing, during execution, and post-processing phases. We further classify QAOA deployment settings—such as hardware-constrained devices, stochastic noise-dominated environments, and dense graphs problem—and recommend appropriate QEM techniques for each. A comparative analysis highlights the trade-offs among mitigation accuracy, resource overhead, and robustness to different noise types. By synthesizing recent advances and identifying open challenges, our paper provides both a comprehensive survey and a practical framework for designing robust, noise-resilient QAOA pipelines on near-term quantum platforms.

IEEE Access•Jan 1, 2025•2 citations

Error Mitigation–Driven Enhancement of QAOA Performance on NISQ Devices

Kondreddy Sathwika, Maka Sri Varshith, Marati Nanda Kumar +1 more

The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.

International Conference on AI-Driven Smart Systems and Ubiquitous Computing (ICAUC)•Jan 19, 2026•0 citations

Quantum Approximate Optimization Algorithm: Performance, Mechanism, and Implementation on Near-Term Devices

Leo Zhou, Sheng-Tao Wang, Soonwon Choi +2 more

The quantum approximate optimization algorithm (QAOA) is a hybrid quantum-classical variational algorithm designed to tackle combinatorial optimization problems.Despite its promise for near-term quantum applications, not much is currently understood about the QAOA's performance beyond its lowestdepth variant.An essential but missing ingredient for understanding and deploying the QAOA is a constructive approach to carry out the outer-loop classical optimization.We provide an in-depth study of the performance of the QAOA on MaxCut problems by developing an efficient parameter-optimization procedure and revealing its ability to exploit nonadiabatic operations.Building on observed patterns in optimal parameters, we propose heuristic strategies for initializing optimizations to find quasioptimal p-level QAOA parameters in O½polyðpÞ time, whereas the standard strategy of random initialization requires 2 OðpÞ optimization runs to achieve similar performance.We then benchmark the QAOA and compare it with quantum annealing, especially on difficult instances where adiabatic quantum annealing fails due to small spectral gaps.The comparison reveals that the QAOA can learn via optimization to utilize nonadiabatic mechanisms to circumvent the challenges associated with vanishing spectral gaps.Finally, we provide a realistic resource analysis on the experimental implementation of the QAOA.When quantum fluctuations in measurements are accounted for, we illustrate that optimization is important only for problem sizes beyond numerical simulations but accessible on near-term devices.We propose a feasible implementation of large MaxCut problems with a few hundred vertices in a system of 2D neutral atoms, reaching the regime to challenge the best classical algorithms.

arXiv:1812.01041•Physical Review X•Jun 24, 2020•932 citations
Running quantum circuits on quantum computers does not always generate "clean" results, unlike on a simulator, as noise plays a significant role in any quantum device. To explore this, we experimented with the Quantum Approximate Optimization Algorithm (QAOA) on quantum simulators and real quantum hardware. QAOA is a hybrid classical-quantum algorithm and requires hundreds or thousands of independent executions of the quantum circuit for optimization, which typically goes beyond the publicly available resources for quantum computing. We were granted access to the IBM Quantum System One at the Cleveland Clinic, the first on-premises IBM system in the U.S. This paper explores different optimization methods, techniques, and error mitigation methods to observe how they react to quantum noise differently, which is helpful for other researchers to understand the complexities of running QAOA on real quantum hardware and the challenges faced in dealing with noise.
Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve NP-hard problems in near-term gate-based noisy quantum devices. In QAOA, the gate parameters of a parameterized quantum circuit (PQC) are varied by a classical optimizer to generate a quantum state with a significant support to the optimal solution. The existing analysis fails to consider nonidealities in the qubit quality i.e., short lifetime and imperfect gate operations in a realistic quantum hardware. In this article, we study the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analysis indicates that QAOA performance is noise-sensitive (especially higher-depth QAOA instances). Therefore, the optimal number of stages (p-value) for any QAOA instance is limited by the noise in the target hardware as opposed to the current perception that QAOA will provide monotonically better performance with higher-depth. We show that the two-qubit gate error has to be decreased by more than 75% of the current state-of-the-art levels to attain a performance within 10% of the maximum value for the lowest-depth QAOA.
The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.
Quantum computers are increasing in size and quality but are still very noisy. Error mitigation extends the size of the quantum circuits that noisy devices can meaningfully execute. However, state-of-the-art error mitigation methods are hard to implement and the limited qubit connectivity in superconducting qubit devices restricts most applications to the hardware's native topology. Here we show a quantum approximate optimization algorithm (QAOA) on nonplanar random regular graphs with up to 40 nodes enabled by a machine learning-based error mitigation. We use a swap network with careful decision-variable-to-qubit mapping and a feed-forward neural network to optimize a depth-two QAOA on up to 40 qubits. We observe a meaningful parameter optimization for the largest graph which requires running quantum circuits with 958 two-qubit gates. Our paper emphasizes the need to mitigate samples, and not only expectation values, in quantum approximate optimization. These results are a step towards executing quantum approximate optimization at a scale that is not classically simulable. Reaching such system sizes is key to properly understanding the true potential of heuristic algorithms like QAOA. Published by the American Physical Society 2024
The Quantum Approximate Optimization Algorithm (QAOA) is a leading candidate for solving combinatorial optimization problems on near-term quantum hardware. However, its practical deployment remains severely limited by hardware-induced noise and decoherence. In the absence of full fault tolerance, Quantum Error Mitigation (QEM) techniques offer a viable approach to enhance QAOA performance on noisy intermediate-scale quantum (NISQ) devices. In this work, we present a unified classification of QEM strategies specifically tailored for QAOA, systematically categorized into preprocessing, during execution, and post-processing phases. We further classify QAOA deployment settings—such as hardware-constrained devices, stochastic noise-dominated environments, and dense graphs problem—and recommend appropriate QEM techniques for each. A comparative analysis highlights the trade-offs among mitigation accuracy, resource overhead, and robustness to different noise types. By synthesizing recent advances and identifying open challenges, our paper provides both a comprehensive survey and a practical framework for designing robust, noise-resilient QAOA pipelines on near-term quantum platforms.
The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.
The quantum approximate optimization algorithm (QAOA) is a hybrid quantum-classical variational algorithm designed to tackle combinatorial optimization problems.Despite its promise for near-term quantum applications, not much is currently understood about the QAOA's performance beyond its lowestdepth variant.An essential but missing ingredient for understanding and deploying the QAOA is a constructive approach to carry out the outer-loop classical optimization.We provide an in-depth study of the performance of the QAOA on MaxCut problems by developing an efficient parameter-optimization procedure and revealing its ability to exploit nonadiabatic operations.Building on observed patterns in optimal parameters, we propose heuristic strategies for initializing optimizations to find quasioptimal p-level QAOA parameters in O½polyðpÞ time, whereas the standard strategy of random initialization requires 2 OðpÞ optimization runs to achieve similar performance.We then benchmark the QAOA and compare it with quantum annealing, especially on difficult instances where adiabatic quantum annealing fails due to small spectral gaps.The comparison reveals that the QAOA can learn via optimization to utilize nonadiabatic mechanisms to circumvent the challenges associated with vanishing spectral gaps.Finally, we provide a realistic resource analysis on the experimental implementation of the QAOA.When quantum fluctuations in measurements are accounted for, we illustrate that optimization is important only for problem sizes beyond numerical simulations but accessible on near-term devices.We propose a feasible implementation of large MaxCut problems with a few hundred vertices in a system of 2D neutral atoms, reaching the regime to challenge the best classical algorithms.