Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1907.09631

Analysis of Quantum Approximate Optimization Algorithm under Realistic Noise in Superconducting Qubits

Mahabubul Alam, Abdullah Ash Saki, Swaroop Ghosh

Published Jul 13, 2019• 33 citations
arXivHTMLPDF

Abstract

The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.

DOI
10.48550/arxiv.1907.09631

Related papers

Design-Space Exploration of Quantum Approximate Optimization Algorithm under Noise

Mahabubul Alam, Abdullah Ash Saki, Swaroop Ghosh

Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve NP-hard problems in near-term gate-based noisy quantum devices. In QAOA, the gate parameters of a parameterized quantum circuit (PQC) are varied by a classical optimizer to generate a quantum state with a significant support to the optimal solution. The existing analysis fails to consider nonidealities in the qubit quality i.e., short lifetime and imperfect gate operations in a realistic quantum hardware. In this article, we study the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analysis indicates that QAOA performance is noise-sensitive (especially higher-depth QAOA instances). Therefore, the optimal number of stages (p-value) for any QAOA instance is limited by the noise in the target hardware as opposed to the current perception that QAOA will provide monotonically better performance with higher-depth. We show that the two-qubit gate error has to be decreased by more than 75% of the current state-of-the-art levels to attain a performance within 10% of the maximum value for the lowest-depth QAOA.

Custom Integrated Circuits Conference•Mar 1, 2020•28 citations

The effect of classical optimizers and Ansatz depth on QAOA performance in noisy devices

Aidan Pellow-Jarman, Shane McFarthing, Ilya Sinayskiy +3 more

The Quantum Approximate Optimization Algorithm (QAOA) is a variational quantum algorithm for Near-term Intermediate-Scale Quantum computers (NISQ) providing approximate solutions for combinatorial optimization problems. The QAOA utilizes a quantum-classical loop, consisting of a quantum ansatz and a classical optimizer, to minimize some cost function, computed on the quantum device. This paper presents an investigation into the impact of realistic noise on the classical optimizer and the determination of optimal circuit depth for the Quantum Approximate Optimization Algorithm (QAOA) in the presence of noise. We find that, while there is no significant difference in the performance of classical optimizers in a state vector simulation, the Adam and AMSGrad optimizers perform best in the presence of shot noise. Under the conditions of real noise, the SPSA optimizer, along with ADAM and AMSGrad, emerge as the top performers. The study also reveals that the quality of solutions to some 5 qubit minimum vertex cover problems increases for up to around six layers in the QAOA circuit, after which it begins to decline. This analysis shows that increasing the number of layers in the QAOA in an attempt to increase accuracy may not work well in a noisy device.

arXiv:2307.10149•Scientific Reports•Jul 11, 2024•39 citations

Scaling quantum approximate optimization on near-term hardware

Phillip C. Lotshaw, Thien Nguyen, Anthony Santana +5 more

The quantum approximate optimization algorithm (QAOA) is an approach for near-term quantum computers to potentially demonstrate computational advantage in solving combinatorial optimization problems. However, the viability of the QAOA depends on how its performance and resource requirements scale with problem size and complexity for realistic hardware implementations. Here, we quantify scaling of the expected resource requirements by synthesizing optimized circuits for hardware architectures with varying levels of connectivity. Assuming noisy gate operations, we estimate the number of measurements needed to sample the output of the idealized QAOA circuit with high probability. We show the number of measurements, and hence total time to solution, grows exponentially in problem size and problem graph degree as well as depth of the QAOA ansatz, gate infidelities, and inverse hardware graph degree. These problems may be alleviated by increasing hardware connectivity or by recently proposed modifications to the QAOA that achieve higher performance with fewer circuit layers.

arXiv:2201.02247•Scientific Reports•Jul 20, 2022•37 citations

Error Mitigation–Driven Enhancement of QAOA Performance on NISQ Devices

Kondreddy Sathwika, Maka Sri Varshith, Marati Nanda Kumar +1 more

The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.

International Conference on AI-Driven Smart Systems and Ubiquitous Computing (ICAUC)•Jan 19, 2026•0 citations

Evaluation of Quantum Approximate Optimization Algorithm based on the approximation ratio of single samples.

Jason M. Larkin, Matías Jonsson, Daniel Justice +1 more

The Quantum Approximate Optimization Algorithm (QAOA) is a hybrid quantum-classical algorithm to solve binary-variable optimization problems. Due to its expected robustness to systematic errors and the short circuit depth, it is one of the promising candidates likely to run on near-term quantum devices. We project the performance of QAOA applied to the Max-Cut problem and compare it with some of the best classical alternatives, both for exact or approximate solution. When comparing approximate solvers, their performance is characterized by the computational time taken to achieve a given quality of solution. Since QAOA is based on sampling, we introduce performance metrics based on the probability of observing a sample above a certain quality. In addition, we show that the QAOA performance varies significantly with the graph type. By selecting a suitable optimizer for the variational parameters and reducing the number of function evaluations, QAOA performance improves by up to 2 orders of magnitude compared to previous estimates. Especially for 3-regular random graphs, this setting decreases the performance gap with classical alternatives.

•Jun 8, 2020•6 citations

Multi-angle quantum approximate optimization algorithm

Rebekah Herrman, Phillip C. Lotshaw, James Ostrowski +2 more

The quantum approximate optimization algorithm (QAOA) generates an approximate solution to combinatorial optimization problems using a variational ansatz circuit defined by parameterized layers of quantum evolution. In theory, the approximation improves with increasing ansatz depth but gate noise and circuit complexity undermine performance in practice. Here, we investigate a multi-angle ansatz for QAOA that reduces circuit depth and improves the approximation ratio by increasing the number of classical parameters. Even though the number of parameters increases, our results indicate that good parameters can be found in polynomial time for a test dataset we consider. This new ansatz gives a 33% increase in the approximation ratio for an infinite family of MaxCut instances over QAOA. The optimal performance is lower bounded by the conventional ansatz, and we present empirical results for graphs on eight vertices that one layer of the multi-angle anstaz is comparable to three layers of the traditional ansatz on MaxCut problems. Similarly, multi-angle QAOA yields a higher approximation ratio than QAOA at the same depth on a collection of MaxCut instances on fifty and one-hundred vertex graphs. Many of the optimized parameters are found to be zero, so their associated gates can be removed from the circuit, further decreasing the circuit depth. These results indicate that multi-angle QAOA requires shallower circuits to solve problems than QAOA, making it more viable for near-term intermediate-scale quantum devices.

arXiv:2109.11455•Scientific Reports•Apr 26, 2022•117 citations
The quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve combinatorial optimization problems in near-term gate-based noisy quantum devices. In QAOA, the objective is a function of the quantum state, which itself is a function of the gate parameters of a multi-level parameterized quantum circuit (PQC). A classical optimizer varies the continuous gate parameters to generate distributions (quantum state) with significant support to the optimal solution. Even at the lowest circuit depth, QAOA offers non-trivial provable performance guarantee which is expected to increase with the circuit depth. However, the existing analysis fails to consider non-idealities in the qubit quality i.e., short lifetime and imperfect gate operations in realistic quantum hardware. In this article, we investigate the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analyses indicate that the optimal number of stages (p-value) for any QAOA instance is limited by the noise characteristics (gate error, coherence time, etc.) of the target hardware as opposed to the current perception that higher-depth QAOA will provide monotonically better performance for a given problem compared to the low-depth implementations.
Quantum approximate optimization algorithm (QAOA) is a promising quantum-classical hybrid technique to solve NP-hard problems in near-term gate-based noisy quantum devices. In QAOA, the gate parameters of a parameterized quantum circuit (PQC) are varied by a classical optimizer to generate a quantum state with a significant support to the optimal solution. The existing analysis fails to consider nonidealities in the qubit quality i.e., short lifetime and imperfect gate operations in a realistic quantum hardware. In this article, we study the impact of various noise sources on the performance of QAOA both in simulation and on a real quantum computer from IBM. Our analysis indicates that QAOA performance is noise-sensitive (especially higher-depth QAOA instances). Therefore, the optimal number of stages (p-value) for any QAOA instance is limited by the noise in the target hardware as opposed to the current perception that QAOA will provide monotonically better performance with higher-depth. We show that the two-qubit gate error has to be decreased by more than 75% of the current state-of-the-art levels to attain a performance within 10% of the maximum value for the lowest-depth QAOA.
The Quantum Approximate Optimization Algorithm (QAOA) is a variational quantum algorithm for Near-term Intermediate-Scale Quantum computers (NISQ) providing approximate solutions for combinatorial optimization problems. The QAOA utilizes a quantum-classical loop, consisting of a quantum ansatz and a classical optimizer, to minimize some cost function, computed on the quantum device. This paper presents an investigation into the impact of realistic noise on the classical optimizer and the determination of optimal circuit depth for the Quantum Approximate Optimization Algorithm (QAOA) in the presence of noise. We find that, while there is no significant difference in the performance of classical optimizers in a state vector simulation, the Adam and AMSGrad optimizers perform best in the presence of shot noise. Under the conditions of real noise, the SPSA optimizer, along with ADAM and AMSGrad, emerge as the top performers. The study also reveals that the quality of solutions to some 5 qubit minimum vertex cover problems increases for up to around six layers in the QAOA circuit, after which it begins to decline. This analysis shows that increasing the number of layers in the QAOA in an attempt to increase accuracy may not work well in a noisy device.
The quantum approximate optimization algorithm (QAOA) is an approach for near-term quantum computers to potentially demonstrate computational advantage in solving combinatorial optimization problems. However, the viability of the QAOA depends on how its performance and resource requirements scale with problem size and complexity for realistic hardware implementations. Here, we quantify scaling of the expected resource requirements by synthesizing optimized circuits for hardware architectures with varying levels of connectivity. Assuming noisy gate operations, we estimate the number of measurements needed to sample the output of the idealized QAOA circuit with high probability. We show the number of measurements, and hence total time to solution, grows exponentially in problem size and problem graph degree as well as depth of the QAOA ansatz, gate infidelities, and inverse hardware graph degree. These problems may be alleviated by increasing hardware connectivity or by recently proposed modifications to the QAOA that achieve higher performance with fewer circuit layers.
The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.
The Quantum Approximate Optimization Algorithm (QAOA) is a hybrid quantum-classical algorithm to solve binary-variable optimization problems. Due to its expected robustness to systematic errors and the short circuit depth, it is one of the promising candidates likely to run on near-term quantum devices. We project the performance of QAOA applied to the Max-Cut problem and compare it with some of the best classical alternatives, both for exact or approximate solution. When comparing approximate solvers, their performance is characterized by the computational time taken to achieve a given quality of solution. Since QAOA is based on sampling, we introduce performance metrics based on the probability of observing a sample above a certain quality. In addition, we show that the QAOA performance varies significantly with the graph type. By selecting a suitable optimizer for the variational parameters and reducing the number of function evaluations, QAOA performance improves by up to 2 orders of magnitude compared to previous estimates. Especially for 3-regular random graphs, this setting decreases the performance gap with classical alternatives.
The quantum approximate optimization algorithm (QAOA) generates an approximate solution to combinatorial optimization problems using a variational ansatz circuit defined by parameterized layers of quantum evolution. In theory, the approximation improves with increasing ansatz depth but gate noise and circuit complexity undermine performance in practice. Here, we investigate a multi-angle ansatz for QAOA that reduces circuit depth and improves the approximation ratio by increasing the number of classical parameters. Even though the number of parameters increases, our results indicate that good parameters can be found in polynomial time for a test dataset we consider. This new ansatz gives a 33% increase in the approximation ratio for an infinite family of MaxCut instances over QAOA. The optimal performance is lower bounded by the conventional ansatz, and we present empirical results for graphs on eight vertices that one layer of the multi-angle anstaz is comparable to three layers of the traditional ansatz on MaxCut problems. Similarly, multi-angle QAOA yields a higher approximation ratio than QAOA at the same depth on a collection of MaxCut instances on fifty and one-hundred vertex graphs. Many of the optimized parameters are found to be zero, so their associated gates can be removed from the circuit, further decreasing the circuit depth. These results indicate that multi-angle QAOA requires shallower circuits to solve problems than QAOA, making it more viable for near-term intermediate-scale quantum devices.