Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.07823

Optimizing Vapor Cells for Rydberg Atom-Based Electrometer Applications

Dhriti Maurya, Alexandra B. Artusio‐Glimpse, Adil Meraki, Lopez, Daniel, Vladimir Aksyuk

Published Sep 9, 2025• 0 citations
arXivHTMLPDF

Abstract

We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.

DOI
10.48550/arxiv.2509.07823

Related papers

Batch-fabrication of all-dielectric vapor cells enabling optically addressed Rydberg atom electrometry

Alexandra B. Artusio‐Glimpse, Adil Meraki, Hunter Shillingburg +9 more

Abstract Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the manufacturing of miniature atomic clocks and quantum sensors. However, silicon’s high dielectric constant and conductive losses at millimeter wave frequencies limit its suitability for Rydberg-atom electrometry, which enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. To address this, we present an all-glass wafer-level microfabrication process that eliminates silicon, creating hermetically sealed vapor cells that are stable over long timelines with embedded cesium dispensers. Femtosecond laser machining precisely defines the cell geometry, and laser-activated alkali loading ensures reliable filling. We demonstrate long-term vacuum stability and robust Rydberg excitation through electromagnetically induced transparency measurements. We then use these cells to measure a 34 GHz millimeter wave field resonant with the $$58{{\rm{D}}}_{5/2}\to 60{{\rm{P}}}_{3/2}$$ 58 D 5 / 2 → 60 P 3 / 2 transition using Autler-Townes splitting and observe the expected linear dependence with field strength. This work demonstrates that the all-glass bonding approach offers a highly durable low-loss cell alternative for miniaturized millimeter wave and microwave quantum sensing, with the potential to flexibly incorporate a range of other dielectric and semiconductor materials and integrate with photonic and electronic technologies.

arXiv:2503.15433•Microsystems & Nanoengineering•Jun 18, 2026•2 citations

MEMS vapor cells-based Rydberg-atom electrometry toward miniaturization and high sensitivity

Yintao Ma, Pan Chen, Mingzhi Yu +7 more

Rydberg-atom electrometry, as an emerging cutting-edge technology, features high sensitivity, broad bandwidth, calibration-free operation, and beyond. However, until now the key atomic vapor cells used for confining electric field-sensitive Rydberg atoms nearly made with traditional glass-blown techniques, hindering the miniaturization, integration, and batch manufacturing. Here, we present the wafer-level MEMS atomic vapor cells with glass-silicon-glass sandwiched structure that are batch-manufactured for both frequency stability and electric field measurement. We use specially customized ultra-thick silicon wafers with a resistivity exceeding 10,000 Ω cm, three orders of magnitude higher than that of typical silicon, and a thickness of 6 mm, providing a 4-fold improvement in optical interrogation length. With the as-developed MEMS atomic vapor cell, we configured a high-sensitivity Rydberg-atom electrometry with the minimal detectable microwave field to be 2.8 mV/cm. This combination of miniaturization and sensitivity represents a significant advance in the state-of-the-art field of Rydberg-atom electrometry, paving the way for chip-scale Rydberg-atom electrometry and potentially opening up new applications in a wider variety of fields.

arXiv:2509.01911•Microsystems & Nanoengineering•Jun 10, 2026•0 citations

Field Distortion and Optimization of a Vapor Cell in Rydberg Atom-Based Radio-Frequency Electric Field Measurement

Zhenfei Song, Wanfeng Zhang, Qi Wu +4 more

Highly excited Rydberg atoms in a room-temperature vapor cell are promising for developing a radio-frequency (RF) electric field (E-field) sensor and relevant measurement standards with high accuracy and sensitivity. The all-optical sensing approach is based on electromagnetically-induced transparency and Autler-Townes splitting induced by the RF E-field. Systematic investigation of measurement uncertainty is of great importance for developing a national measurement standard. The presence of a dielectric vapor cell containing alkali atoms changes the magnitude, polarization, and spatial distribution of the incident RF field. In this paper, the field distortion of rubidium vapor cells is investigated, in terms of both field strength distortion and depolarization. Full-wave numerical simulation and analysis are employed to determine general optimization solutions for minimizing such distortion and validated by measuring the E-field vector distribution inside different vapor cells. This work can improve the accuracy of atom-based RF E-field measurements and contributes to the development of related RF quantum sensors.

Sensors•Sep 22, 2018•23 citations

Vapor cell characterization and optimization for applications in Rydberg atom-based radio frequency sensing

Mohammad Noaman, Hadi Amarloo, Rajesh Pandiyan +6 more

We measure radio frequency electromagnetic wave total scattering cross-sections and internal radio frequency electromagnetic field distributions for several novel types of MEMs atomic vapor cells, optimized for Rydberg atom-based radio frequency electric field sensing. Vapor cells that use metamaterial structures are described. The vapor cells are designed for high radio frequency transmission, uniform internal radio frequency field amplitudes, and low radar scattering cross-section. Experimental scattering data and radio frequency field amplitude maps from functioning vapor cells are presented. The total scattering cross-sections are calibrated to the total scattering cross-sections for a series of steel balls, whose scattering is quantified using Mie scattering theory. We measure across a span of radio frequencies ranging from ~1 GHz – 20 GHz. The work is important for engineering Rydberg atom-based radio frequency electric field sensors for deployment in applications such as test and measurement.

Optical and Quantum Sensing and Precision Metrology II•Mar 8, 2023•9 citations

Subwavelength micromachined vapor-cell-based Rydberg quantum antennas

Avital Giat, Kfir Levi, Ori Nefesh +1 more

Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.

Quantum Science and Technology•May 28, 2026•2 citations

Depolarization effect of a vapor cell in atom-based radio-frequency electric field measurement

Wanfeng Zhang, Zhenfei Song, Huihui Mu +1 more

Abstract The Rydberg atom can be used as an active probe for precision radio-frequency (RF) electric field (E-field) measurement; however, the RF cavity resonance and scattering effect of an atomic vapor cell lead to polarization distortion inside the cell, and the depolarization effect limits the sensitivity and accuracy of E-field measurement. The finite element simulation and characteristic mode analysis of a hollow-cavity model are implemented to find an optimized solution of minimizing such depolarization. Manipulating atoms in the middle layer of a vapor cell along an incident field vector can avoid the depolarization, which is validated by the vector distribution measurement at 15.09 GHz.

Japanese Journal of Applied Physics•Aug 8, 2018•2 citations
We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.
Abstract Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the manufacturing of miniature atomic clocks and quantum sensors. However, silicon’s high dielectric constant and conductive losses at millimeter wave frequencies limit its suitability for Rydberg-atom electrometry, which enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. To address this, we present an all-glass wafer-level microfabrication process that eliminates silicon, creating hermetically sealed vapor cells that are stable over long timelines with embedded cesium dispensers. Femtosecond laser machining precisely defines the cell geometry, and laser-activated alkali loading ensures reliable filling. We demonstrate long-term vacuum stability and robust Rydberg excitation through electromagnetically induced transparency measurements. We then use these cells to measure a 34 GHz millimeter wave field resonant with the 58D5/2→60P3/258{{\rm{D}}}_{5/2}\to 60{{\rm{P}}}_{3/2}58D5/2​→60P3/2​ 58 D 5 / 2 → 60 P 3 / 2 transition using Autler-Townes splitting and observe the expected linear dependence with field strength. This work demonstrates that the all-glass bonding approach offers a highly durable low-loss cell alternative for miniaturized millimeter wave and microwave quantum sensing, with the potential to flexibly incorporate a range of other dielectric and semiconductor materials and integrate with photonic and electronic technologies.
Rydberg-atom electrometry, as an emerging cutting-edge technology, features high sensitivity, broad bandwidth, calibration-free operation, and beyond. However, until now the key atomic vapor cells used for confining electric field-sensitive Rydberg atoms nearly made with traditional glass-blown techniques, hindering the miniaturization, integration, and batch manufacturing. Here, we present the wafer-level MEMS atomic vapor cells with glass-silicon-glass sandwiched structure that are batch-manufactured for both frequency stability and electric field measurement. We use specially customized ultra-thick silicon wafers with a resistivity exceeding 10,000 Ω cm, three orders of magnitude higher than that of typical silicon, and a thickness of 6 mm, providing a 4-fold improvement in optical interrogation length. With the as-developed MEMS atomic vapor cell, we configured a high-sensitivity Rydberg-atom electrometry with the minimal detectable microwave field to be 2.8 mV/cm. This combination of miniaturization and sensitivity represents a significant advance in the state-of-the-art field of Rydberg-atom electrometry, paving the way for chip-scale Rydberg-atom electrometry and potentially opening up new applications in a wider variety of fields.
Highly excited Rydberg atoms in a room-temperature vapor cell are promising for developing a radio-frequency (RF) electric field (E-field) sensor and relevant measurement standards with high accuracy and sensitivity. The all-optical sensing approach is based on electromagnetically-induced transparency and Autler-Townes splitting induced by the RF E-field. Systematic investigation of measurement uncertainty is of great importance for developing a national measurement standard. The presence of a dielectric vapor cell containing alkali atoms changes the magnitude, polarization, and spatial distribution of the incident RF field. In this paper, the field distortion of rubidium vapor cells is investigated, in terms of both field strength distortion and depolarization. Full-wave numerical simulation and analysis are employed to determine general optimization solutions for minimizing such distortion and validated by measuring the E-field vector distribution inside different vapor cells. This work can improve the accuracy of atom-based RF E-field measurements and contributes to the development of related RF quantum sensors.
We measure radio frequency electromagnetic wave total scattering cross-sections and internal radio frequency electromagnetic field distributions for several novel types of MEMs atomic vapor cells, optimized for Rydberg atom-based radio frequency electric field sensing. Vapor cells that use metamaterial structures are described. The vapor cells are designed for high radio frequency transmission, uniform internal radio frequency field amplitudes, and low radar scattering cross-section. Experimental scattering data and radio frequency field amplitude maps from functioning vapor cells are presented. The total scattering cross-sections are calibrated to the total scattering cross-sections for a series of steel balls, whose scattering is quantified using Mie scattering theory. We measure across a span of radio frequencies ranging from ~1 GHz – 20 GHz. The work is important for engineering Rydberg atom-based radio frequency electric field sensors for deployment in applications such as test and measurement.
Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.
Abstract The Rydberg atom can be used as an active probe for precision radio-frequency (RF) electric field (E-field) measurement; however, the RF cavity resonance and scattering effect of an atomic vapor cell lead to polarization distortion inside the cell, and the depolarization effect limits the sensitivity and accuracy of E-field measurement. The finite element simulation and characteristic mode analysis of a hollow-cavity model are implemented to find an optimized solution of minimizing such depolarization. Manipulating atoms in the middle layer of a vapor cell along an incident field vector can avoid the depolarization, which is validated by the vector distribution measurement at 15.09 GHz.