Optimizing the performance of cryogenic quantum amplifiers is a key step toward achieving high-fidelity and scalable qubit readout. In this work, we present efficient and accurate modeling of a Josephson traveling-wave parametric amplifier (JTWPA) based on electromagnetic (EM) and circuit co-simulation. In contrast to conventional simulation methods where an equivalent lumped-element circuit model of the JTWPA is required, we directly perform full EM analysis of the device to faithfully determine the linear response. The extracted S-parameters are then fed into a nonlinear harmonic balance simulator with Josephson junctions represented as circuit elements. The simulated linear and gain properties are compared with experimental results and show good agreement.
Optimizing the performance of cryogenic quantum amplifiers is a key step toward achieving high-fidelity and scalable qubit readout. In this work, we present efficient and accurate modeling of a Josephson traveling-wave parametric amplifier (JTWPA) based on electromagnetic (EM) and circuit co-simulation. In contrast to conventional simulation methods where an equivalent lumped-element circuit model of the JTWPA is required, we directly perform full EM analysis of the device to faithfully determine the linear response. The extracted S-parameters are then fed into a nonlinear harmonic balance simulator with Josephson junctions represented as circuit elements. The simulated linear and gain properties are compared with experimental results and show good agreement.
The development of large-scale superconducting quantum computers critically depends on the accurate readout of qubit states. To enable this, cryogenic parametric amplifiers have been proposed and developed, and have since found widespread use in small-signal detection applications. Among various amplifier architectures, Josephson traveling-wave parametric amplifiers (JTWPAs) are widely adopted due to their broad bandwidth, high saturation power, and compatibility with superconducting qubits. In this work, we present a design workflow of JTWPAs based on a co-simulation approach combining electromagnetic (EM) and circuit-level simulation. We apply this method to a uniform JTWPA, comparing our simulation results with experimental data. To mitigate the challenge of constructing lumped element circuit models usually used in conventional simulation method, we directly perform full EM analysis of the device to accurately determine its linear response. The extracted S parameters are then fed into a nonlinear harmonic balance simulator with Josephson junctions modeled as circuit elements. By doing so, the linear and gain properties of the JTWPA are extracted. Different factors that impact device performance including gain compression, phase matching, and fabrication imperfections are further investigated and modeled. A good agreement between simulation and measurements is identified, establishing the effectiveness of our approach in designing quantum parametric amplifiers.
Josephson traveling-wave parametric amplifiers (JTWPAs) are critical for superconducting quantum computers in enabling simultaneous high-fidelity measurements of many qubits. Despite their importance, translating designs to working hardware remains a significant obstacle, with numerical modeling increasingly being used to help close this gap. Unfortunately, existing time-domain (TD) circuit modeling methods struggle to close this gap due to their inability to model the physical layout of a device. In principle, finite-element time-domain (FETD) methods can model the JTWPA physical layout, but these simulations are complicated by the wide bandwidths and multiscale features involved. Here, we develop an unconditionally stable 1-D FETD model for JTWPAs that can model dispersive losses over wide bandwidths to begin overcoming these challenges. We validate our method against harmonic balance (HB) simulations of a Floquet-mode JTWPA before simulating a realistic multiplexed qubit readout scenario where HB is impractical.
Predicting the performance of traveling-wave parametric amplifiers (TWPAs) based on nonlinear elements like superconducting Josephson junctions (JJs) is vital for qubit read-out in quantum computers. The purpose of this article is twofold: (a) to demonstrate how nonlinear inductors based on combinations of JJs can be modeled in commercial circuit simulators, and (b) to show how the harmonic balance (HB) is used in the reliable prediction of the amplifier performance e.g., gain and pump harmonic power conversion. Experimental characterization of two types of TWPA architectures is compared with simulations to showcase the reliability of the HB method. We disseminate the modeling know-how and techniques to new designers of parametric amplifiers.
Josephson traveling-wave parametric amplifiers (JTWPAs) are wideband, ultralow-noise amplifiers used to enable the readout of superconducting qubits. While individual JTWPAs have achieved high performance, behavior between devices is inconsistent due to wide manufacturing tolerances. Amplifier designs could be modified to improve resilience towards variations in amplifier components; however, existing device models often rely on analytical techniques that typically fail to incorporate component variations. To begin addressing this issue, a 1D numerical method for modeling JTWPAs is introduced in this work. The method treats the Josephson junctions and transmission lines in an amplifier as coupled subsystems and can easily incorporate arbitrary parameter variations. We discretize the transmission line subsystem with a finite element time domain method and the Josephson junction subsystem with a finite difference method, with leap-frog time marching used to evolve the system in time. We validate our method by comparing the computed gain to an analytical model for a traditional JTWPA architecture and one with resonant phase matching. We then use our method to demonstrate the impact of variations in Josephson junctions and phase-matching resonators on amplification. In future work, the method will be adjusted to incorporate additional amplifier architectures and extended to a 3D full-wave approach.
We present an efficient, accurate, and comprehensive analysis framework for generic, multi-port nonlinear parametric circuits, in the presence of dissipation from lossy circuit components, based on "quantum-adapted" X-parameters. We apply this method to Josephson traveling-wave parametric amplifiers (JTWPAs) – a key component in superconducting and spin qubit quantum computing architectures – which are challenging to model accurately due to their thousands of linear and nonlinear circuit components. X-parameters are generated from a harmonic balance solution of the classical nonlinear circuit and then mapped to the field ladder operator basis, so that the energy associated with each of the multiple interacting modes corresponds to photon occupancy, rather than classical power waves. Explicit relations for the quantum efficiency of a generic, multi-port, multi-frequency parametric circuit are presented and evaluated for two distinct JTWPA designs. The gain and quantum efficiency are consistent with those obtained from Fourier analysis of time-domain solutions, but with enhanced accuracy, speed, and the ability to include real-world impairments, statistical variations, parasitic effects, and impedance mismatches (inand out-of-band) seamlessly. The unified flow is implemented in Keysight’s PathWave Advanced Design System (ADS) and independently in an open-source simulation code, JosephsonCircuits.jl, from the MIT authors.
Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.