Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2508.11712

Gradient-Based Inverse Optimization of Atom-Chip Wire Currents for BEC Transport

Naoki Shibuya

Published Aug 14, 2025• 1 citation
arXivHTMLPDF

Abstract

Modulating wire currents to shift a magnetic trap along an atom chip enables smooth contact-free delivery of Bose-Einstein condensates but can deform the confinement profile causing parametric heating and atom loss. We introduce a fast simulation framework based on inverse optimization that, given an initial trap and a predefined trajectory over time, computes a wire current schedule that transports the atoms and restores the trap geometry upon arrival. We assess trap's minimum energy, lateral displacement, confinement profile and an adiabaticity parameter over a 2.4 mm trajectory for various transport durations between 2s and 5s, demonstrating the trade-off between speed and adiabaticity.

DOI
10.48550/arxiv.2508.11712

Related papers

Surrogate-assisted three-dimensional Gross-Pitaevskii characterization of Bose-Einstein condensate transport on an atom chip

Naoki Shibuya

We develop a surrogate-assisted workflow for millimeter-scale transport of a $^{87}$Rb Bose--Einstein condensate (BEC) on a multi-wire atom chip. Gradient-based inverse optimization generates 42 current schedules spanning seven regularization strengths and six transport durations. A low-cost Gaussian phase-space model ranks these schedules by endpoint overlap at three atom numbers. A Thomas--Fermi scaling (Ermakov) model estimates cloud dimensions for case-specific moving-grid construction. We then evaluate selected schedules in detail with the three-dimensional Gross--Pitaevskii equation (GPE). At $N=10^3$ and $T=0.5$ s, the surrogate predicts a larger axial center-of-mass (COM) excursion than at longer durations. The GPE confirms this prediction and reveals sloshing that persists through delivery, with an endpoint fidelity $F_{3D}=0.9244$. For all five longer transports, the surrogate predicts near-unit endpoint overlap for the top-ranked schedules, and GPE propagation using these schedules gives $F_{3D}>0.9997$. At $N=10^4$ and $T=2.0$ s, the surrogate-selected schedule similarly gives $F_{3D}=0.999932$. These results demonstrate that the surrogate estimates provide a useful low-cost basis for candidate screening, while GPE propagation resolves the transport dynamics and the delivered condensate state.

cond-mat.quant-gasCross-listedarXiv:2609.13762•Sep 15, 2026•0 citations

Optimal control of the transport of Bose-Einstein condensates with atom chips

Sirine Amri, Robin Corgier, Dominique Sugny +3 more

Using Optimal Control Theory (OCT), we design fast ramps for the controlled transport of Bose-Einstein condensates with atom chips' magnetic traps. These ramps are engineered in the context of precision atom interferometry experiments and support transport over large distances, typically of the order of 1 mm, i.e. about 1,000 times the size of the atomic clouds, yet with durations not exceeding 200 ms. We show that with such transport durations of the order of the trap period, one can recover the ground state of the final trap at the end of the transport. The performance of the OCT procedure is compared to that of a Shortcut-To-Adiabaticity (STA) protocol and the respective advantages/disadvantages of the OCT treatment over the STA one are discussed.

arXiv:1812.10999•Scientific Reports•Mar 29, 2019•44 citations

Fast manipulation of Bose–Einstein condensates with an atom chip

Robin Corgier, Sirine Amri, Waldemar Herr +6 more

We present a detailed theoretical analysis of the implementation of shortcut-to-adiabaticity protocols for the fast transport of neutral atoms with atom chips.The objective is to engineer transport ramps with durations not exceeding a few hundred milliseconds to provide metrologically relevant input states for an atomic sensor.Aided by numerical simulations of the classical and quantum dynamics, we study the behavior of a Bose-Einstein condensate in an atom chip setup with realistic anharmonic trapping.We detail the implementation of fast and controlled transports over large distances of several millimeters, i.e. distances 1000 times larger than the size of the atomic cloud.A subsequent optimized release and collimation step demonstrates the capability of our transport method to generate ensembles of quantum gases with expansion speeds in the picokelvin regime.The performance of this procedure is analyzed in terms of collective excitations reflected in residual center of mass and size oscillations of the condensate.We further evaluate the robustness of the protocol against experimental imperfections.

arXiv:1712.04820•New Journal of Physics•Apr 13, 2018•59 citations

Fast transport of Bose–Einstein condensates in anharmonic traps

Jing Li, Xi Chen, A. Ruschhaupt

We present a method to transport Bose-Einstein condensates (BECs) in anharmonic traps and in the presence of atom-atom interactions in short times without residual excitation. Using a combination of a variational approach and inverse engineering methods, we derive a set of Ermakov-like equations that take into account the coupling between the centre of mass motion and the breathing mode. By an appropriate inverse engineering strategy of those equations, we then design the trap trajectory to achieve the desired boundary conditions. Numerical examples for cubic or quartic anharmonicities are provided for fast and high-fidelity transport of BECs. Potential applications are atom interferometry and quantum information processing. This article is part of the theme issue 'Shortcuts to adiabaticity: theoretical, experimental and interdisciplinary perspectives'.

arXiv:2210.03788•Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences•Nov 6, 2022•5 citations

Experiments with Bose-Einstein condensates on an atom chip

Ben Upcroft, Chris J. Vale, Adrian Ratnapala +5 more

We describe the production of BECs on a new type of atom chip based on silver foil. Our atom chip is fabricated with thick wires capable of carrying currents of several amperes without overheating. The silver surface is highly reflective to light resonant with optical transitions used for Rb. The pattern on the chip consists of two parallel Z-trap wires, capable of producing two-wire guide, and two additional endcap wires for varying the axial confinement. Condensates are produced in magnetic microtraps formed within 1 mm of surface of the chip. We have observed the fragmentation of cold atom clouds when brought close to the chip surface. This results from a perturbed trapping potential caused by nanometer deviations of the current path through the wires on the chip. We present results of fragmentation of cold clouds at distances below 100 μm from the wires and investigate the origin of the deviating current. The fragmentation has different characteristics to those seen with copper conductors. The dynamics of atoms in these microtraps is also investigated.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 14, 2005•0 citations

Bose–Einstein condensation on an atom chip

Yan Bo, Cheng Feng, Ke Min +3 more

This paper reports an experiment of creating Bose–Einstein condensate (BEC) on an atom chip. The chip-based Z-wire current with a homogeneous bias magnetic field creates a tight magnetic trap, which allows for a fast production of BEC. After a 4.17-s forced radio frequency evaporative cooling, a condensate with about 3000 atoms appears. The transition temperature is about 300 nK. This compact system is quite robust, allowing for versatile extensions and further studying of BEC.

arXiv:0812.2711•Chinese Physics B•Sep 29, 2009•15 citations
Modulating wire currents to shift a magnetic trap along an atom chip enables smooth contact-free delivery of Bose-Einstein condensates but can deform the confinement profile causing parametric heating and atom loss. We introduce a fast simulation framework based on inverse optimization that, given an initial trap and a predefined trajectory over time, computes a wire current schedule that transports the atoms and restores the trap geometry upon arrival. We assess trap's minimum energy, lateral displacement, confinement profile and an adiabaticity parameter over a 2.4 mm trajectory for various transport durations between 2s and 5s, demonstrating the trade-off between speed and adiabaticity.
We develop a surrogate-assisted workflow for millimeter-scale transport of a 87^{87}87Rb Bose--Einstein condensate (BEC) on a multi-wire atom chip. Gradient-based inverse optimization generates 42 current schedules spanning seven regularization strengths and six transport durations. A low-cost Gaussian phase-space model ranks these schedules by endpoint overlap at three atom numbers. A Thomas--Fermi scaling (Ermakov) model estimates cloud dimensions for case-specific moving-grid construction. We then evaluate selected schedules in detail with the three-dimensional Gross--Pitaevskii equation (GPE). At N=103N=10^3N=103 and T=0.5T=0.5T=0.5 s, the surrogate predicts a larger axial center-of-mass (COM) excursion than at longer durations. The GPE confirms this prediction and reveals sloshing that persists through delivery, with an endpoint fidelity F3D=0.9244F_{3D}=0.9244F3D​=0.9244. For all five longer transports, the surrogate predicts near-unit endpoint overlap for the top-ranked schedules, and GPE propagation using these schedules gives F3D>0.9997F_{3D}>0.9997F3D​>0.9997. At N=104N=10^4N=104 and T=2.0T=2.0T=2.0 s, the surrogate-selected schedule similarly gives F3D=0.999932F_{3D}=0.999932F3D​=0.999932. These results demonstrate that the surrogate estimates provide a useful low-cost basis for candidate screening, while GPE propagation resolves the transport dynamics and the delivered condensate state.
Using Optimal Control Theory (OCT), we design fast ramps for the controlled transport of Bose-Einstein condensates with atom chips' magnetic traps. These ramps are engineered in the context of precision atom interferometry experiments and support transport over large distances, typically of the order of 1 mm, i.e. about 1,000 times the size of the atomic clouds, yet with durations not exceeding 200 ms. We show that with such transport durations of the order of the trap period, one can recover the ground state of the final trap at the end of the transport. The performance of the OCT procedure is compared to that of a Shortcut-To-Adiabaticity (STA) protocol and the respective advantages/disadvantages of the OCT treatment over the STA one are discussed.
We present a detailed theoretical analysis of the implementation of shortcut-to-adiabaticity protocols for the fast transport of neutral atoms with atom chips.The objective is to engineer transport ramps with durations not exceeding a few hundred milliseconds to provide metrologically relevant input states for an atomic sensor.Aided by numerical simulations of the classical and quantum dynamics, we study the behavior of a Bose-Einstein condensate in an atom chip setup with realistic anharmonic trapping.We detail the implementation of fast and controlled transports over large distances of several millimeters, i.e. distances 1000 times larger than the size of the atomic cloud.A subsequent optimized release and collimation step demonstrates the capability of our transport method to generate ensembles of quantum gases with expansion speeds in the picokelvin regime.The performance of this procedure is analyzed in terms of collective excitations reflected in residual center of mass and size oscillations of the condensate.We further evaluate the robustness of the protocol against experimental imperfections.
We present a method to transport Bose-Einstein condensates (BECs) in anharmonic traps and in the presence of atom-atom interactions in short times without residual excitation. Using a combination of a variational approach and inverse engineering methods, we derive a set of Ermakov-like equations that take into account the coupling between the centre of mass motion and the breathing mode. By an appropriate inverse engineering strategy of those equations, we then design the trap trajectory to achieve the desired boundary conditions. Numerical examples for cubic or quartic anharmonicities are provided for fast and high-fidelity transport of BECs. Potential applications are atom interferometry and quantum information processing. This article is part of the theme issue 'Shortcuts to adiabaticity: theoretical, experimental and interdisciplinary perspectives'.
We describe the production of BECs on a new type of atom chip based on silver foil. Our atom chip is fabricated with thick wires capable of carrying currents of several amperes without overheating. The silver surface is highly reflective to light resonant with optical transitions used for Rb. The pattern on the chip consists of two parallel Z-trap wires, capable of producing two-wire guide, and two additional endcap wires for varying the axial confinement. Condensates are produced in magnetic microtraps formed within 1 mm of surface of the chip. We have observed the fragmentation of cold atom clouds when brought close to the chip surface. This results from a perturbed trapping potential caused by nanometer deviations of the current path through the wires on the chip. We present results of fragmentation of cold clouds at distances below 100 μm from the wires and investigate the origin of the deviating current. The fragmentation has different characteristics to those seen with copper conductors. The dynamics of atoms in these microtraps is also investigated.