Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.22972

Complexity-energy trade-off in programmable unitary interferometers

Nikita A. Nemkov, Stanislav S. Straupe

Published Jul 30, 2025• 0 citations
arXivHTMLPDF

Abstract

Coherent multiport interferometers are a promising approach to realize matrix multiplication in integrated photonics. However, most known architectures - such as MZI and beamsplitter meshes, as well as more general interferometers - suffer from complicated procedures for mapping the matrix elements of the desired transformation to specific phaseshifts in the device. We point out that the high programming complexity is intrinsic, rather than accidental. At the same time, we argue that interferometers admitting efficient programming algorithms in general yield a much lower useful output energy, which ultimately limits their accuracy and energy efficiency.

DOI
10.48550/arxiv.2507.22972

Related papers

Energy-efficient programmable integrated photonics via optimized Euler rotations

Pablo Martínez-Carrasco Romero, Andrés Macho, José Roberto Rausell‐Campo +2 more

Programmable integrated photonics (PIP) has emerged as a powerful on-chip platform for optical signal processing and computing, enabling the implementation of reconfigurable N$\times$N unitary matrix transformations through meshes of tunable interferometers, which realize 2$\times$2 unitary matrices. However, the energy consumption associated with phase-shifter actuation is becoming a major limitation to the scalability of PIP platforms. Here, we introduce a geometric framework for energy optimization in PIP circuits by exploiting the representation of 2$\times$2 unitary matrices as concatenations of basic Euler rotations on the Bloch sphere. We show that equivalent implementations of the same N$\times$N unitary matrix (N $\geq$ 2) can exhibit markedly different energy costs depending on the rotation trajectories on the Bloch sphere implemented by each interferometer. Leveraging this insight, we identify minimum-energy configurations by systematically selecting the shortest rotation trajectories. We experimentally and numerically validate the proposed approach in diverse silicon PIP architectures, including feedforward and multipurpose hexagonal meshes, neural network accelerators, and photonic quantum-gate implementations. These results establish a general route toward more energy-efficient large-scale PIP processors for classical and quantum signal processing and computing applications.

arXiv:2605.19570•May 19, 2026•0 citations

Multiport field-programmable MZI-Based optical processors

Farhad Shokraneh

There has been an escalating demand for dynamically reconfigurable photonic structures to implement any linear optical transformation between the input and output ports. Such devices are often constructed as a mesh of reconfigurable Mach-Zehnder interferometers(MZIs). Consequently, the programmed MZIs can redistribute the light to implementarbitrary unitary transformations from an input vector of optical signals to an outputvector of coherent optical modes. These structures have been widely used as a promising hardware platform for fast and energy-efficient matrix multiplications in different applications, such as information processing, machine learning algorithms, neural networks(NNs), etc. Matrix multiplication is an essential but time- and energy-consuming operation in machine learning computations. The computational complexity of NNs necessitates well designed and implemented hardware accelerators for fast and energy-efficient data processing, which allows for scaling the structure to larger NNs in current and upcoming applications. Over the last few years, the considerable progress in silicon photonics has made it possible to fabricate multiport optical interferometric structures with small ootprints and high-power efficiency, which can be exploited as hardware accelerators, thanks to the inherent parallelism of optics. This Ph.D. thesis presents the theoretical and experimental analysis of multiport reconfigurable MZI-based optical processors. The optical processors are meshes of 2×2 reconfigurable MZIs. It is demonstrated how the optical transformation matrix of the optical processors is theoretically decomposed for a given application. The Reck-mesh-based optical processor is experimentally calibrated before programming the device for a given application. Additionally, the thesis includes the theoretical and measurement results of a single layer NN implemented by a 4×4 Reck-mesh-based optical processor. Finally, a novel phase-error- and loss-tolerant multiport field-programmable MZI-based optical processor for optical NNs is proposed. The new structure with a diamond mesh shape makes use of a set of additional MZIs compared to the commonly used Reck (triangular) mesh. The additional MZIs in the Diamond mesh make its topology more symmetric yielding higher phase error- and loss-tolerance, and also provide extra degrees of freedom in the optimization of ONN weight matrix during training. Furthermore, the better classification performance of the Diamond mesh compared to the Reck mesh is associated with the fact that the Diamond mesh is capable of excluding the light intensity that could have degraded the classification accuracy of the implemented ONNs. This is done by means of the tapered-out wave guides of the additional MZIs in the Diamond mesh, while the optimal light intensity is sent to its outputs for better classification. The demonstration of these analyses is significant as it can be used to implement any universal field-programmable photonic device as an optical processor, i.e., optical computational accelerator, which can be experimentally programmed to implement arbitrary linear optical transformation matrix for a given application. Additionally, the presented analytical results in this thesis can be used to enhance the classification performance of ONNs implemented by such structures. As a result of these analyses, the thesis proposes the Diamond-mesh-based optical processor as a promising candidate for large scale ONNs which outperforms the Reck-mesh-based ones in the presence of experimental imperfections

•Jan 1, 2021•0 citations

Optimal design for universal multiport interferometers

William R. Clements, Peter C. Humphreys, Benjamin J. Metcalf +2 more

Universal multiport interferometers, which can be programmed to implement any linear transformation between multiple channels, are emerging as a powerful tool for both classical and quantum photonics. These interferometers are typically composed of a regular mesh of beam splitters and phase shifters, allowing for straightforward fabrication using integrated photonic architectures and ready scalability. The current, standard design for universal multiport interferometers is based on work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)PRLTAO0031-900710.1103/PhysRevLett.73.58]. We demonstrate a new design for universal multiport interferometers based on an alternative arrangement of beam splitters and phase shifters, which outperforms that by Reck et al. Our design requires half the optical depth of the Reck design and is significantly more robust to optical losses.

arXiv:1603.08788•Optica•Dec 2, 2016•1,218 citations

A Recurrent Multiport Interferometer Architecture for Fault-Tolerant Programmable Photonics

Mihai Crisan, David A. Carpenter, Shamsul Arafin

We propose a novel multiport interferometer architecture that uses optical recursion to mitigate hardware errors and scales as O(N). We also show that it is possible to construct perfect transformations with imperfect beamsplitters meshes.

•Jan 1, 2024•0 citations

Accurate Self-Configuration of Rectangular Multiport Interferometers

Ryan Hamerly, Saumil Bandyopadhyay, Dirk Englund

Multiport interferometers based on integrated beamsplitter meshes are widely used in photonic technologies. While the rectangular mesh is favored for its compactness and uniformity, its geometry resists conventional self-configuration approaches, which are essential to programming large meshes in the presence of fabrication error. Here, we present a configuration algorithm, related to the $2\ifmmode\times\else\texttimes\fi{}2$ block decomposition of a unitary matrix, that overcomes this limitation. Our proposed algorithm is robust to errors, requires no prior knowledge of the process variations, and relies only on external sources and detectors. We show that self-configuration using this technique reduces the effect of fabrication errors by the same quadratic factor observed in triangular meshes. This relaxes a significant limit to the size of multiport interferometers, removing a major roadblock to the scaling of optical quantum and machine-learning hardware.

arXiv:2106.03249•Physical Review Applied•Aug 5, 2022•51 citations

Perturbative photonic matrix-vector multiplication with reduced phase-shift range

Suren A. Fldzhyan, Stanislav S. Straupe, M. Yu. Saygin

Programmable photonic meshes provide a promising platform for analog matrix-vector multiplication, but their scalability is often limited by the large phase-shift ranges required in universal interferometer circuits. We introduce a perturbative programming method that operates the circuit near a fixed reference configuration and realizes the target transformation through interferometric subtraction, thereby reducing the required programmable phase excursion. We develop this approach for photonic matrix-vector multiplication architectures based on universal unitary meshes, and low-depth non-unitary constructions based on sums of unitaries. We identify favorable reference configurations through a local conditioning criterion, analyze the phase statistics obtained for random target matrices, and show that perturbative programming produces phase distribution shrinking as the matrix size increases. Identified reference point allows for the subtraction to be carried out electronically after detection, avoiding the interferometric subtraction loss. We further quantify the trade-off between reduced phase range and the intrinsic overhead introduced by the subtraction architecture, and show that for sufficiently lossy phase shifters the reduced phase range can compensate for this penalty. These results identify perturbative programming as a conditional but potentially useful route toward more scalable programmable photonic matrix processors.

arXiv:2606.02451•Physical Review A•Aug 17, 2026•0 citations
Coherent multiport interferometers are a promising approach to realize matrix multiplication in integrated photonics. However, most known architectures - such as MZI and beamsplitter meshes, as well as more general interferometers - suffer from complicated procedures for mapping the matrix elements of the desired transformation to specific phaseshifts in the device. We point out that the high programming complexity is intrinsic, rather than accidental. At the same time, we argue that interferometers admitting efficient programming algorithms in general yield a much lower useful output energy, which ultimately limits their accuracy and energy efficiency.
Programmable integrated photonics (PIP) has emerged as a powerful on-chip platform for optical signal processing and computing, enabling the implementation of reconfigurable N×\times×N unitary matrix transformations through meshes of tunable interferometers, which realize 2$\times2unitarymatrices.However,theenergyconsumptionassociatedwithphase−shifteractuationisbecomingamajorlimitationtothescalabilityofPIPplatforms.Here,weintroduceageometricframeworkforenergyoptimizationinPIPcircuitsbyexploitingtherepresentationof22 unitary matrices. However, the energy consumption associated with phase-shifter actuation is becoming a major limitation to the scalability of PIP platforms. Here, we introduce a geometric framework for energy optimization in PIP circuits by exploiting the representation of 22unitarymatrices.However,theenergyconsumptionassociatedwithphase−shifteractuationisbecomingamajorlimitationtothescalabilityofPIPplatforms.Here,weintroduceageometricframeworkforenergyoptimizationinPIPcircuitsbyexploitingtherepresentationof2\times2unitarymatricesasconcatenationsofbasicEulerrotationsontheBlochsphere.WeshowthatequivalentimplementationsofthesameN2 unitary matrices as concatenations of basic Euler rotations on the Bloch sphere. We show that equivalent implementations of the same N2unitarymatricesasconcatenationsofbasicEulerrotationsontheBlochsphere.WeshowthatequivalentimplementationsofthesameN\times$N unitary matrix (N ≥\geq≥ 2) can exhibit markedly different energy costs depending on the rotation trajectories on the Bloch sphere implemented by each interferometer. Leveraging this insight, we identify minimum-energy configurations by systematically selecting the shortest rotation trajectories. We experimentally and numerically validate the proposed approach in diverse silicon PIP architectures, including feedforward and multipurpose hexagonal meshes, neural network accelerators, and photonic quantum-gate implementations. These results establish a general route toward more energy-efficient large-scale PIP processors for classical and quantum signal processing and computing applications.
There has been an escalating demand for dynamically reconfigurable photonic structures to implement any linear optical transformation between the input and output ports. Such devices are often constructed as a mesh of reconfigurable Mach-Zehnder interferometers(MZIs). Consequently, the programmed MZIs can redistribute the light to implementarbitrary unitary transformations from an input vector of optical signals to an outputvector of coherent optical modes. These structures have been widely used as a promising hardware platform for fast and energy-efficient matrix multiplications in different applications, such as information processing, machine learning algorithms, neural networks(NNs), etc. Matrix multiplication is an essential but time- and energy-consuming operation in machine learning computations. The computational complexity of NNs necessitates well designed and implemented hardware accelerators for fast and energy-efficient data processing, which allows for scaling the structure to larger NNs in current and upcoming applications. Over the last few years, the considerable progress in silicon photonics has made it possible to fabricate multiport optical interferometric structures with small ootprints and high-power efficiency, which can be exploited as hardware accelerators, thanks to the inherent parallelism of optics. This Ph.D. thesis presents the theoretical and experimental analysis of multiport reconfigurable MZI-based optical processors. The optical processors are meshes of 2×2 reconfigurable MZIs. It is demonstrated how the optical transformation matrix of the optical processors is theoretically decomposed for a given application. The Reck-mesh-based optical processor is experimentally calibrated before programming the device for a given application. Additionally, the thesis includes the theoretical and measurement results of a single layer NN implemented by a 4×4 Reck-mesh-based optical processor. Finally, a novel phase-error- and loss-tolerant multiport field-programmable MZI-based optical processor for optical NNs is proposed. The new structure with a diamond mesh shape makes use of a set of additional MZIs compared to the commonly used Reck (triangular) mesh. The additional MZIs in the Diamond mesh make its topology more symmetric yielding higher phase error- and loss-tolerance, and also provide extra degrees of freedom in the optimization of ONN weight matrix during training. Furthermore, the better classification performance of the Diamond mesh compared to the Reck mesh is associated with the fact that the Diamond mesh is capable of excluding the light intensity that could have degraded the classification accuracy of the implemented ONNs. This is done by means of the tapered-out wave guides of the additional MZIs in the Diamond mesh, while the optimal light intensity is sent to its outputs for better classification. The demonstration of these analyses is significant as it can be used to implement any universal field-programmable photonic device as an optical processor, i.e., optical computational accelerator, which can be experimentally programmed to implement arbitrary linear optical transformation matrix for a given application. Additionally, the presented analytical results in this thesis can be used to enhance the classification performance of ONNs implemented by such structures. As a result of these analyses, the thesis proposes the Diamond-mesh-based optical processor as a promising candidate for large scale ONNs which outperforms the Reck-mesh-based ones in the presence of experimental imperfections
Universal multiport interferometers, which can be programmed to implement any linear transformation between multiple channels, are emerging as a powerful tool for both classical and quantum photonics. These interferometers are typically composed of a regular mesh of beam splitters and phase shifters, allowing for straightforward fabrication using integrated photonic architectures and ready scalability. The current, standard design for universal multiport interferometers is based on work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)PRLTAO0031-900710.1103/PhysRevLett.73.58]. We demonstrate a new design for universal multiport interferometers based on an alternative arrangement of beam splitters and phase shifters, which outperforms that by Reck et al. Our design requires half the optical depth of the Reck design and is significantly more robust to optical losses.
Multiport interferometers based on integrated beamsplitter meshes are widely used in photonic technologies. While the rectangular mesh is favored for its compactness and uniformity, its geometry resists conventional self-configuration approaches, which are essential to programming large meshes in the presence of fabrication error. Here, we present a configuration algorithm, related to the $2\ifmmode\times\else\texttimes\fi{}2$ block decomposition of a unitary matrix, that overcomes this limitation. Our proposed algorithm is robust to errors, requires no prior knowledge of the process variations, and relies only on external sources and detectors. We show that self-configuration using this technique reduces the effect of fabrication errors by the same quadratic factor observed in triangular meshes. This relaxes a significant limit to the size of multiport interferometers, removing a major roadblock to the scaling of optical quantum and machine-learning hardware.
Programmable photonic meshes provide a promising platform for analog matrix-vector multiplication, but their scalability is often limited by the large phase-shift ranges required in universal interferometer circuits. We introduce a perturbative programming method that operates the circuit near a fixed reference configuration and realizes the target transformation through interferometric subtraction, thereby reducing the required programmable phase excursion. We develop this approach for photonic matrix-vector multiplication architectures based on universal unitary meshes, and low-depth non-unitary constructions based on sums of unitaries. We identify favorable reference configurations through a local conditioning criterion, analyze the phase statistics obtained for random target matrices, and show that perturbative programming produces phase distribution shrinking as the matrix size increases. Identified reference point allows for the subtraction to be carried out electronically after detection, avoiding the interferometric subtraction loss. We further quantify the trade-off between reduced phase range and the intrinsic overhead introduced by the subtraction architecture, and show that for sufficiently lossy phase shifters the reduced phase range can compensate for this penalty. These results identify perturbative programming as a conditional but potentially useful route toward more scalable programmable photonic matrix processors.