© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2507.13187

Technical Review on RF-Amplifiers for Quantum Computer Circuits: New Architectures of Josephson Parametric Amplifier

Ahmad Salmanogli, Hesam Zandi, Esmaeili, Mahdi, Eskandari, Abolfazl, Akbari, Mohsen

Published Jul 17, 2025• 0 citations

Abstract

Josephson Parametric Amplifiers (JPAs) are key components in quantum information processing due to their ability to amplify weak quantum signals with near-quantum-limited noise performance. This is essential for applications such as qubit readout, quantum sensing, and communication, where signal fidelity and coherence preservation are critical. Unlike CMOS and HEMT amplifiers used in conventional RF systems, JPAs are specifically optimized for millikelvin (mK) cryogenic environments. CMOS amplifiers offer good integration but perform poorly at ultra-low temperatures due to high noise. HEMT amplifiers provide better noise performance but are power-intensive and less suited for mK operation. JPAs, by contrast, combine low power consumption with ultra-low noise and excellent cryogenic compatibility, making them ideal for quantum systems. The first part of this study compares these RF amplifier types and explains why JPAs are preferred in cryogenic quantum applications. The second part focuses on the design and analysis of JPAs based on both single Josephson junctions and junction arrays. While single-junction JPAs utilize nonlinear inductance for amplification, they suffer from gain compression, limited dynamic range, and sensitivity to fabrication variations. To overcome these challenges, this work explores JPA designs using Josephson junction arrays. Arrays distribute the nonlinear response, enhancing power handling, linearity, impedance tunability, and coherence while reducing phase noise. Several advanced JPA architectures are proposed, simulated, and compared using quantum theory and CAD tools to assess performance trade-offs and improvements over conventional designs.

DOI: 10.48550/arxiv.2507.13187

Related papers

Quantum Noise Limited Nondegenerate Josephson Parametric Amplifier with Nb/AlOx/Nb Junctions for Qubit Readout

Ilya S. Besedin, I. Pologov, Lyudmila V. Filippenko +2 more

Abstract Over the last two decades, the superconducting qubits have become a promising and rapidly growing area of research. However, there are specific challenges when working with such a delicate system. One of them is the qubit state readout. Since a very small signal (of the order of 1 photon) is used for the readout, its detection is challenging and it requires low-noise cryogenic amplifiers working in the 3–12 GHz frequency range. Josephson parametric amplifiers (JPAs) are one of the most studied and developed candidates. Currently, several JPA designs offer low noise performance and instantaneous bandwidth from tens of MHz to several GHz; they are also becoming an integral part of circuit quantum electrodynamics (cQED) setups. In the current work, results are presented of the measurements of a JPA made of a coplanar waveguide with an array of three SQUIDs. Nondegenerate amplification and an amplifier added noise being close to the quantum limit are demonstrated.

Instruments and Experimental Techniques•Oct 1, 2024•0 citations

Al-InAs Superconductor-Semiconductor Josephson Junction Parametric Amplifier

Z. Hao, T. Shaw, Mehdi Hatefipour +5 more

Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.

Conference digest•Jun 24, 2024•0 citations

Parametric amplification in a Josephson junction array Fabry-Pérot cavity

Javier Navarro Montilla, Nikita S. Klimovich, A. Barbier +2 more

Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.

Physica Scripta•Sep 1, 2025•1 citation

Understanding the Saturation Power of Josephson Parametric Amplifiers Made from SQUID Arrays

Luca Planat, Rémy Dassonneville, Javier Puertas Martínez +7 more

Josephson parametric amplifiers (JPAs) are key devices in superconducting quantum circuits, as they ultimately dictate quantum efficiency and speed of measurement, but they still suffer from low saturation power. This work shows that a JPA's saturation power can be increased by using a Josephson-junction array, rather than a single-junction amplifier. Modeling such an array as a nonlinear $L\phantom{\rule{0}{0ex}}C$ resonator reproduces the observed amplification and saturation effects very well. This use of arrays to fight low power saturation is easy to implement, and can be directly combined with impedance-engineered environments to enhance dynamic range even more.

arXiv:1809.08476•Physical Review Applied•Mar 6, 2019•54 citations

Phase-sensitive cascade quantum amplifier with nearly noiseless operation

Ilari Lilja, Ekaterina Mukhanova, Michael Perelshtein +5 more

Phase-sensitive parametric devices enable quadrature-selective amplification with the potential for sub-quantum-limited noise performance. In this work, we investigate the operation of a SQUID-based Josephson Parametric Amplifier (JPA), comparing its performance in the phase-preserving and phase-sensitive regimes. The device, fabricated using VTT SWAPS technology, is driven in a three-wave mixing configuration and characterized in a reflection-based measurement setup at millikelvin temperatures. To directly probe the noise performance at low JPA gains, we employ a cascaded amplification scheme in which a Traveling-Wave Parametric Amplifier (TWPA) provides low-noise pre-amplification of the JPA output. In a phase-preserving operation, the JPA exhibits near-quantum-limited performance with a system noise temperature of $351\pm53$ mK at 6 GHz. In contrast, phase-sensitive operation yields a minimum system noise temperature of $94\pm12$ mK, well below the standard quantum limit of 288 mK. Our results demonstrate that a JPA-TWPA amplifier cascade opens the door to direct, high-fidelity probing of quantum devices without the need for background noise subtraction.

quant-pharXiv:2608.25645•Journal of Low Temperature Physics•Aug 27, 2026•0 citations

Josephson parametric amplifiers for rapid, high-fidelity measurement of solid-state qubits

Shyam Shankar, Z. Hao, Mehdi Hatefipour +3 more

Superconducting quantum circuits are a leading platform for building a large-scale quantum processor [1]. A crucial component necessary for the high-fidelity readout of qubits in this framework, is an ultra-low-noise microwave amplifier. Thus, over the past two decades, superconducting Josephson parametric amplifiers (JPAs) have been developed that achieve near quantum-limited noise performance, an order of magnitude lower than competing microwave amplifiers based on semiconductor transistors [2]. Nevertheless, JPAs suffer from drawbacks such as limited bandwidth and compression power that makes them difficult to use in an eventual large-scale quantum processor. Thus, an ongoing theme in JPA development is to optimize the circuit to improve these specifications without sacrificing other desirable properties such as the noise performance, ease of construction and operation, etc. Here, we review some results of optimizing a specific JPA circuit called the SNAIL parametric amplifier [3]–[5], shown in Fig. 1, where the acronym SNAIL refers to the Superconducting Nonlinear Asymmetric Inductive eLement. The SNAIL is a composite element made from conventional Al/AlOx/Al Josephson junctions, which has a nonlinear current-phase relation that can be approximated as a nonlinear inductance. By applying a strong microwave frequency pump to modulate the nonlinear inductance, parametric amplification can be realized. By device and circuit engineering we have demonstrated two orders of magnitude improvement in compression power (Fig. 2) in such devices without sacrificing other desirable characteristics.

Conference digest•Jun 25, 2023•2 citations

Josephson Parametric Amplifiers (JPAs) are key components in quantum information processing due to their ability to amplify weak quantum signals with near-quantum-limited noise performance. This is essential for applications such as qubit readout, quantum sensing, and communication, where signal fidelity and coherence preservation are critical. Unlike CMOS and HEMT amplifiers used in conventional RF systems, JPAs are specifically optimized for millikelvin (mK) cryogenic environments. CMOS amplifiers offer good integration but perform poorly at ultra-low temperatures due to high noise. HEMT amplifiers provide better noise performance but are power-intensive and less suited for mK operation. JPAs, by contrast, combine low power consumption with ultra-low noise and excellent cryogenic compatibility, making them ideal for quantum systems. The first part of this study compares these RF amplifier types and explains why JPAs are preferred in cryogenic quantum applications. The second part focuses on the design and analysis of JPAs based on both single Josephson junctions and junction arrays. While single-junction JPAs utilize nonlinear inductance for amplification, they suffer from gain compression, limited dynamic range, and sensitivity to fabrication variations. To overcome these challenges, this work explores JPA designs using Josephson junction arrays. Arrays distribute the nonlinear response, enhancing power handling, linearity, impedance tunability, and coherence while reducing phase noise. Several advanced JPA architectures are proposed, simulated, and compared using quantum theory and CAD tools to assess performance trade-offs and improvements over conventional designs.

Abstract Over the last two decades, the superconducting qubits have become a promising and rapidly growing area of research. However, there are specific challenges when working with such a delicate system. One of them is the qubit state readout. Since a very small signal (of the order of 1 photon) is used for the readout, its detection is challenging and it requires low-noise cryogenic amplifiers working in the 3–12 GHz frequency range. Josephson parametric amplifiers (JPAs) are one of the most studied and developed candidates. Currently, several JPA designs offer low noise performance and instantaneous bandwidth from tens of MHz to several GHz; they are also becoming an integral part of circuit quantum electrodynamics (cQED) setups. In the current work, results are presented of the measurements of a JPA made of a coplanar waveguide with an array of three SQUIDs. Nondegenerate amplification and an amplifier added noise being close to the quantum limit are demonstrated.

Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.

Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.

Josephson parametric amplifiers (JPAs) are key devices in superconducting quantum circuits, as they ultimately dictate quantum efficiency and speed of measurement, but they still suffer from low saturation power. This work shows that a JPA's saturation power can be increased by using a Josephson-junction array, rather than a single-junction amplifier. Modeling such an array as a nonlinear $L\phantom{\rule{0}{0ex}}C$ resonator reproduces the observed amplification and saturation effects very well. This use of arrays to fight low power saturation is easy to implement, and can be directly combined with impedance-engineered environments to enhance dynamic range even more.

Phase-sensitive parametric devices enable quadrature-selective amplification with the potential for sub-quantum-limited noise performance. In this work, we investigate the operation of a SQUID-based Josephson Parametric Amplifier (JPA), comparing its performance in the phase-preserving and phase-sensitive regimes. The device, fabricated using VTT SWAPS technology, is driven in a three-wave mixing configuration and characterized in a reflection-based measurement setup at millikelvin temperatures. To directly probe the noise performance at low JPA gains, we employ a cascaded amplification scheme in which a Traveling-Wave Parametric Amplifier (TWPA) provides low-noise pre-amplification of the JPA output. In a phase-preserving operation, the JPA exhibits near-quantum-limited performance with a system noise temperature of

351\pm53

mK at 6 GHz. In contrast, phase-sensitive operation yields a minimum system noise temperature of

94\pm12

mK, well below the standard quantum limit of 288 mK. Our results demonstrate that a JPA-TWPA amplifier cascade opens the door to direct, high-fidelity probing of quantum devices without the need for background noise subtraction.

Superconducting quantum circuits are a leading platform for building a large-scale quantum processor [1]. A crucial component necessary for the high-fidelity readout of qubits in this framework, is an ultra-low-noise microwave amplifier. Thus, over the past two decades, superconducting Josephson parametric amplifiers (JPAs) have been developed that achieve near quantum-limited noise performance, an order of magnitude lower than competing microwave amplifiers based on semiconductor transistors [2]. Nevertheless, JPAs suffer from drawbacks such as limited bandwidth and compression power that makes them difficult to use in an eventual large-scale quantum processor. Thus, an ongoing theme in JPA development is to optimize the circuit to improve these specifications without sacrificing other desirable properties such as the noise performance, ease of construction and operation, etc. Here, we review some results of optimizing a specific JPA circuit called the SNAIL parametric amplifier [3]–[5], shown in Fig. 1, where the acronym SNAIL refers to the Superconducting Nonlinear Asymmetric Inductive eLement. The SNAIL is a composite element made from conventional Al/AlOx/Al Josephson junctions, which has a nonlinear current-phase relation that can be approximated as a nonlinear inductance. By applying a strong microwave frequency pump to modulate the nonlinear inductance, parametric amplification can be realized. By device and circuit engineering we have demonstrated two orders of magnitude improvement in compression power (Fig. 2) in such devices without sacrificing other desirable characteristics.