Dissipative quantum error correction (QEC) autonomously protects quantum information using engineered dissipation and offers a promising alternative to error correction via measurement and feedback. However, scalability remains a challenge, as correcting high-weight errors typically requires increasing dissipation rates and exponentially many correction operators. Here, we present a scalable dissipative QEC protocol for discrete-variable codes, correcting multi-qubit errors via a trickle-down mechanism that sequentially reduces errors weight. Our construction exploits redundancy in the Knill-Laflamme conditions to design correction operators that act on multiple error subspaces simultaneously, thereby reducing the overhead from exponential to polynomial in the number of required operators. We illustrate our approach with repetition codes under biased noise, showing a fourfold improvement in the exponential suppression factor at realistic physical error rates. Our approach connects autonomous QEC for discrete-variable codes with demonstrated dissipative protocols for bosonic codes and opens up new avenues for traditional measurement-feedback QEC and fault-tolerant quantum operations.
Dissipative quantum error correction (QEC) autonomously protects quantum information using engineered dissipation and offers a promising alternative to error correction via measurement and feedback. However, scalability remains a challenge, as correcting high-weight errors typically requires increasing dissipation rates and exponentially many correction operators. Here, we present a scalable dissipative QEC protocol for discrete-variable codes, correcting multi-qubit errors via a trickle-down mechanism that sequentially reduces errors weight. Our construction exploits redundancy in the Knill-Laflamme conditions to design correction operators that act on multiple error subspaces simultaneously, thereby reducing the overhead from exponential to polynomial in the number of required operators. We illustrate our approach with repetition codes under biased noise, showing a fourfold improvement in the exponential suppression factor at realistic physical error rates. Our approach connects autonomous QEC for discrete-variable codes with demonstrated dissipative protocols for bosonic codes and opens up new avenues for traditional measurement-feedback QEC and fault-tolerant quantum operations.
Abstract To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC)1 is an essential requirement and a central challenge. Existing demonstrations of QEC are based on an active schedule of error-syndrome measurements and adaptive recovery operations2, 3, 4, 5, 6, 7 that are hardware intensive and prone to introducing and propagating errors. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system1, 8, 9, 10, 11, 12, 13, 14, but so far it has remained challenging to achieve the specific form of dissipation required to counter the most prominent errors in a physical platform. Here we encode a logical qubit in Schrödinger cat-like multiphoton states15 of a superconducting cavity, and demonstrate a corrective dissipation process that stabilizes an error-syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol protects the quantum information by autonomously correcting single-photon-loss errors and boosts the coherence time of the bosonic qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with additional phase-stabilization and fault-tolerant techniques16, 17, 18, our experiment suggests quantum dissipation engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.
Practical implementations of quantum information processing will ultimately rely on our ability to control large-scale quantum systems. This control faces two major challenges: the exponential growth of the state space with the number of components, and the ability to control dissipation in these systems. While current small- and medium-scale quantum platforms rely on traditional approaches that reason at the level of individual quantum states and aim to isolate systems from their environment, such strategies become increasingly impractical as system size grows. The complexity of interactions and the presence of noise in realistic implementations demand scalable approaches that go beyond state-by-state control. Such approaches require a shift toward reasoning in terms of collections of states that share symmetries or dynamical properties, and towards dealing with systems being far from their equilibrium state because of their openness. This thesis explores methods to understand and engineer dissipation for stabilizing quantum states and subspaces, enabling autonomous error correction, and facilitating robust logical operations, all through the lens of subspaces of the exponentially large state space. In particular, we develop symmetry-protected and nonlinear stabilization schemes that not only stabilize states and subspaces but also exhibit intrinsic error-correcting features rooted in driven-dissipative dynamics. We introduce a novel error correction strategy based on gradual entropy removal, offering scalable implementations with reduced overhead. Finally, we investigate the interplay between dissipation and logical operations, uncovering both limitations and opportunities in realistic quantum sensing and gate protocols, with a special focus on finite-energy bosonic codes.
Abstract We propose an autonomous quantum error correction scheme using squeezed cat (SC) code against excitation loss in continuous-variable systems. Through reservoir engineering, we show that a structured dissipation can stabilize a two-component SC while autonomously correcting the errors. The implementation of such dissipation only requires low-order nonlinear couplings among three bosonic modes or between a bosonic mode and a qutrit. While our proposed scheme is device independent, it is readily implementable with current experimental platforms such as superconducting circuits and trapped-ion systems. Compared to the stabilized cat, the stabilized SC has a much lower dominant error rate and a significantly enhanced noise bias. Furthermore, the bias-preserving operations for the SC have much lower error rates. In combination, the stabilized SC leads to substantially better logical performance when concatenating with an outer discrete-variable code. The surface-SC scheme achieves more than one order of magnitude increase in the threshold ratio between the loss rate κ 1 and the engineered dissipation rate κ 2 . Under a practical noise ratio κ 1 / κ 2 = 10 −3 , the repetition-SC scheme can reach a 10 −15 logical error rate even with a small mean excitation number of 4, which already suffices for practically useful quantum algorithms.
Realizing the potential of quantum computing will require achieving sufficiently low logical error rates. Many applications call for error rates in the 10−15 regime, but state-of-the-art quantum platforms typically have physical error rates near 10−3. Quantum error correction (QEC) promises to bridge this divide by distributing quantum logical information across many physical qubits so that errors can be detected and corrected. Logical errors are then exponentially suppressed as the number of physical qubits grows, provided that the physical error rates are below a certain threshold. QEC also requires that the errors are local and that performance is maintained over many rounds of error correction, two major outstanding experimental challenges. Here, we implement 1D repetition codes embedded in a 2D grid of superconducting qubits which demonstrate exponential suppression of bit or phase-flip errors, reducing logical error per round by more than 100× when increasing the number of qubits from 5 to 21. Crucially, this error suppression is stable over 50 rounds of error correction. We also introduce a method for analyzing error correlations with high precision, and characterize the locality of errors in a device performing QEC for the first time. Finally, we perform error detection using a small 2D surface code logical qubit on the same device, and show that the results from both 1D and 2D codes agree with numerical simulations using a simple depolarizing error model. These findings demonstrate that superconducting qubits are on a viable path towards fault tolerant quantum computing.
Quantum error correction (QEC) is a crucial step towards long coherence times required for efficient quantum information processing. One major challenge in this direction concerns the fast real-time analysis of error syndrome measurements and the associated feedback control. Recent proposals on autonomous QEC (AQEC) have opened new perspectives to overcome this difficulty. Here, we design an AQEC scheme based on quantum reservoir engineering adapted to superconducting qubits. We focus on a three-qubit bit-flip code, where three transmon qubits are dispersively coupled to a few low-Q resonator modes. By applying only continuous-wave drives of fixed but well-chosen frequencies and amplitudes, we engineer an effective interaction Hamiltonian to evacuate the entropy created by eventual bit-flip errors. We provide a full analytical and numerical study of the protocol while introducing the main limitations on the achievable error correction rates.
Quantum error correction (QEC) faces a significant challenge in realistic noisy intermediate-scale quantum (NISQ) devices: correlated decoherence. Building upon the foundational QEC-C protocol, we introduce QEC-C II, a scalable framework that delivers robust fault tolerance against spatially and temporally correlated noise. By integrating decoherence-free subspace (DFS) principles and correlation-aware adaptive feedback, QEC-C II achieves exponential error suppression in simulation under correlated noise models, with fewer physical qubits than typical topological baselines for the same target error in our benchmarks. The protocol leverages an enhanced scaling law, β(n) = 0.788 e 0.360n , and efficiently suppresses noise with minimal computational overhead. We validate QEC-C II on 28-qubit GHZ states, extend it to 56-qubit subspaces, and conduct 84-qubit stress-test simulations under correlated noise models. The results demonstrate sustained fidelities exceeding 99.99 % in simulations under realistic dephasing, amplitude-damping, burst-error, and correlated decoherence scenarios, with rapid convergence (typically ≤ 2 iterations in our simulations). QEC-C II significantly reduces both resource and control complexity, simplifying hardware integration and improving performance with increasing system size. This work provides a practical pathway toward resource-efficient fault tolerance in quantum processors operating in real-world correlated environments.