Abstract We present a theoretical and experimental study of superconducting ring resonators as an initial step toward their implementation in superconducting electronics and quantum technologies, with promising applications including superconducting parametric amplifiers with pump-signal isolation, flux-controlled quantum circuits, ultra-sensitive measurements in quantum sensing, and THz instrumentations. These devices have the potentially valuable property of supporting two orthogonal electromagnetic modes that couple to a common Cooper pair, quasiparticle, and phonon system. We present here a comprehensive theoretical and experimental analysis of the superconducting ring resonator system. We have developed superconducting ring resonator models that describe the key features of microwave behaviour to first order, providing insights into how transmission line inhomogeneities give rise to frequency splitting and mode rotation. Furthermore, we constructed signal flow graphs for a four-port ring resonator to numerically validate the behaviour predicted by our theoretical analysis. Superconducting ring resonators were fabricated in both coplanar waveguide and microstrip geometries using Al and Nb thin films. Microwave characterisation of these devices demonstrates close agreement with theoretical predictions. Our study reveals that frequency splitting and mode rotation are prevalent in ring systems with coupled degenerate modes, and these phenomena become distinctly resolved in high quality factor superconducting ring resonators.
Abstract We present a theoretical and experimental study of superconducting ring resonators as an initial step toward their implementation in superconducting electronics and quantum technologies, with promising applications including superconducting parametric amplifiers with pump-signal isolation, flux-controlled quantum circuits, ultra-sensitive measurements in quantum sensing, and THz instrumentations. These devices have the potentially valuable property of supporting two orthogonal electromagnetic modes that couple to a common Cooper pair, quasiparticle, and phonon system. We present here a comprehensive theoretical and experimental analysis of the superconducting ring resonator system. We have developed superconducting ring resonator models that describe the key features of microwave behaviour to first order, providing insights into how transmission line inhomogeneities give rise to frequency splitting and mode rotation. Furthermore, we constructed signal flow graphs for a four-port ring resonator to numerically validate the behaviour predicted by our theoretical analysis. Superconducting ring resonators were fabricated in both coplanar waveguide and microstrip geometries using Al and Nb thin films. Microwave characterisation of these devices demonstrates close agreement with theoretical predictions. Our study reveals that frequency splitting and mode rotation are prevalent in ring systems with coupled degenerate modes, and these phenomena become distinctly resolved in high quality factor superconducting ring resonators.
Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.
High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.
In this Master thesis, I present a theoretical description and experimental measurements of a tunable microwave resonator operated as a parametric amplifier. Superconducting parametric amplifiers have attracted great interest in recent years as it has been demonstrated that they can operate with a noise performance at the standard quantum limit. \nParametric amplification is achieved in the devices by modulating the electrical length of the resonator at twice the resonance frequency. The device measured in this thesis consists of a quarter-wavelength microwave resonator fabricated in a thin-film aluminum coplanar waveguide geometry. With a termination to ground through a Superconducting Quantum Interference Device (SQUID), the boundary condition of the resonator becomes sensitive to an applied magnetic field. This enables the tuning of the resonance frequencies, using a DC magnetic field, over a wide frequency range of 670MHz. Similarly, an AC magnetic field then allows for the modulation of the resonator electrical length at microwave frequencies. \nWe characterized the device by first measuring the DC tuning curves of the 2nd and 3rd harmonics of the resonator, around 4 GHz and 6 GHz respectively. We then studied parametric amplification in the device when the electrical length was modulated at approximately twice the resonance frequency of one of the modes. We scanned the pump frequency and pump power over a wide range to study the region in parameters which gives parametric gain. We performed an in-depth parameter sweep over this region, identifying pump parameters that provided maximum gain and maximum system noise improvements compared the following HEMT amplifier. \nWe find that the use of the parametric amplifier can improve the system noise temperature by more than 10 dB compared to a start-of-the-art commercial HEMT amplifier. This implies a performance near the standard quantum limit.
In this thesis I describe work on developing theoretical and numerical models of supercon- ducting thin-film microwave resonators. Superconducting resonators are used in a variety of applications, one of which is as kinetic inductance detectors (KIDs). KIDs are ultra-low noise, highly sensitive, multiplexable detectors, with uses in a wide variety of fields including astrophysics, medical imaging, and particle physics. Resonators are also crucial for supercon- ducting qubit readout, superconducting mixers and parametric amplifiers, and as multiplexers for other devices. The results described in this thesis apply to all thin film resonators, but are primarily described in the context of KIDs. I develop models of how constant absorbed power affects superconducting thin films, driving them out of thermal equilibrium with the bath. Using the Chang & Scalapino equations, I calculate numerically the steady-state quasiparticle and phonon distributions for various sources of power (sub-gap and above-gap photons and phonons, single frequency and broadband). Many new results emerge, a few of which are: the quasiparticle heating effects of microwave power, explaining the experimentally measured saturation of resonator performance; the frequency dependence of the quasiparticle generation efficiency in the sub-mm wavelength range; and the importance of phonon trapping in thin films at low temperatures. I then use these nonequilibrium results in higher-level device models. Starting from a generic framework for resonators, I present and implement a model of a KID with variable thermal isolation. I calculate the effects of quasiparticle heating on both the large-signal and small-signal behaviour, highlighting the effects of electrothermal feedback caused by readout power. Electrothermal feedback is shown to be able to increase or decrease the magnitude and bandwidth of the responsivity and noise, depending on the operating point. Finally, I propose an experimental measurement of quasiparticle heating effects in a new device – a four-port ring resonator. In such a device, unlike in the standard two-port resonator, the device can be heated and read out independently. I develop detailed models for the thermal and electrical behaviour of these devices, and suggest a scheme by which the quasiparticle heating effects of microwave power, predicted in this thesis, can be measured.
The usual linear superconducting resonators (with equal frequency intervals between nearest-neighbor modes) are right-handed electromagnetic devices, wherein cross talks between the nearest-neighbor modes are practically unavoidable. Here, we demonstrate the nonlinear superconducting metamaterial resonators, wherein frequency intervals between the nearest-neighbor modes are unequal, by using the composite right/left-handed transmission lines. The microwave transport properties are analyzed by the developed real-space approach, instead of the usual equivalent circuit method. The devices are fabricated by using the usual electron beam evaporation technique, and their microwave transport parameters are measured at 50 mK temperature. The observations are basically consistent with the relevant theoretical predictions and also numerical simulations. Hopefully, the demonstrated nonlinear devices, with well-isolated modes, could be used to encode the superconducting qubits for microwave quantum information processing.