© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2506.02570 · Physical Review Letters

Superconducting Integrated On-Demand Quantum Memory with Microwave Pulse Preservation

Aleksei R. Matanin, Nikita S. Smirnov, Аnton I. Ivanov, Victor I. Polozov, Daria A. Moskaleva, Elizaveta I. Malevannaya, Margarita V Androschuk, Yulia A. Agafonova, Denis E. Shirokov, Aleksander V. Andriyash, Ilya A. Rodionov

Published Jan 23, 2026• 3 citations

Abstract

Microwave quantum memory represents a critical component for quantum radars and resource-efficient approaches to quantum error correction. Superconducting microwave resonators provide highly efficient storage, long coherence times, on-demand reading, and even memory pulse engineering, but it is still challenging to overcome design and materials induced loss channels for on-chip realization. In this Letter, we present a novel architecture of integrated superconducting quantum memory with a dynamically controlled RF-SQUID coupling element in pulse regime, thus ensuring high efficiency storage and cycling storage time. It demonstrates a memory cycle time of 1.51 μs and 57.5(4)% storage fidelity with preservation of the stored pulse shape during the retrieval at single-photon level excitations. We establish that while the proposed active coupler realization introduces no measurable fidelity degradation, the primary limitation arises from impedance matching and materials imperfections. Still the device was used only for storing finite-duration near-single-photon classical microwave pulses, we assert that it operates as a linear device when the photon population in the common resonator remains low so it should be compatible with quantum state storage. The proposed architecture highlights a disruptive potential for on-chip qubit and memory integration for scalable quantum error correction, while identifying specific avenues for near-unity storage fidelity.

DOI: 10.1103/m9qc-ppk3

Related papers

On-Demand Storage and Retrieval of Microwave Photons Using a Superconducting Multiresonator Quantum Memory

Zenghui Bao, Zhiling Wang, Yukai Wu +5 more

We realize on-demand storage and retrieval of weak coherent microwave photon pulses at the single-photon level. A superconducting multiresonator system which is composed of a set of frequency-tunable coplanar waveguide resonators is implemented as the quantum memory. By dynamically tuning the resonant frequencies of the resonators, we achieve tunable memory bandwidth from 10 to 55 MHz, with well preserved phase coherence. We further demonstrate on-demand storage and retrieval of a time-bin flying qubit. This result opens up a prospect to integrate our chip-based quantum memory with the state-of-the-art superconducting quantum circuit technology for quantum information processing.

arXiv:2111.05597•Physical Review Letters•Jul 1, 2021•35 citations

Superconducting quantum memory with a suspended coaxial resonator

Lev Krayzman, Chan U Lei, Suhas Ganjam +3 more

A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: by traditionally machining them out of bulk material and by lithographically fabricating them on a chip in thin film. 3D resonators have few loss channels and larger mode volumes, and therefore smaller participations in the lossy parts, but it can be challenging to achieve high material quality. On-chip resonators can use low-loss thin films, but they confine the field more tightly, resulting in higher participations and additional loss channels from the dielectric substrate. In this work, we present a design in which a dielectric scaffold supports a thin-film conductor within a 3D package, thus combining the low surface participations of bulk-machined cavities with high quality and control over materials of thin-film circuits. By incorporating a separate chip containing a transmon qubit, we realize a quantum memory and measure single-photon lifetimes in excess of a millisecond. This hybrid 3D architecture has several advantages for scaling as it relaxes the importance of the package and permits modular construction with separately replaceable qubit and resonator devices.

arXiv:2402.09504•Applied Physics Letters•May 13, 2024•2 citations

Scalable 3D quantum memory

Edwar Xie, Frank Deppe, Daniel Repp +7 more

Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit both to a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. The external coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of $6$ with a $Z$-fidelity of $82\%$. We also find that this enhancement is not limited by fundamental constraints.

•Mar 13, 2018•1 citation

High-fidelity storage and on-demand retrieval of quantum states via a microwave waveguide

Dao-Quan Zhu, Xiang Yu, Feng-Xiao Sun +1 more

On-demand quantum memory is an important step towards practical applications in various quantum information tasks such as long-distance entanglement distribution, quantum computation, and quantum networks. In this work, based on stimulated Raman adiabatic passage (STIRAP) protocol, we introduce a controllable delay between the reading pulse and writing pulse so that the quantum state can be stored in the superconducting waveguide and finally retrieved on demand with high fidelity. Through systematic numerical simulations, we find that if the duration of the writing pulse is set to be in a certain range, the readout unit is capable of retrieving the quantum state stored in the waveguide with high fidelity at any moment after a critical time. Moreover, we also investigate the robustness of our protocol, and find that the fidelity is robust against both the average number of thermal photons in the waveguide and the duration of the reading pulse. The numerical results also show that the pulse area in our protocol is only about one third of that in the original STIRAP protocol. Our protocol provides a practical way to combine the advantages of both on-demand quantum memory and the STIRAP protocol.

Acta Physica Sinica•Jan 1, 2022•0 citations

Dynamical oscillator-cavity model for quantum memories

Qiongyi He, M. D. Reid, E. Giacobino +2 more

We propose a dynamical approach to quantum memories using an oscillator-cavity model. This overcomes the known difficulties of achieving high quantum input-output fidelity with long storage times compared to the input signal duration. We use a generic model of the memory response, which is applicable to any linear storage medium ranging from a superconducting device to an atomic medium. The temporal switching or gating of the device may either be through a control field changing the coupling, or through a variable detuning approach, as in more recent quantum memory experiments. An exact calculation of the temporal memory response to an external input is carried out. This shows that there is a mode-matching criterion which determines the optimum input and output pulse time evolution. This optimum pulse shape can be modified by changing the gate characteristics. In addition, there is a critical coupling between the atoms and the cavity that allows high fidelity in the presence of long storage times. The quantum fidelity is calculated both for the coherent state protocol, and for a completely arbitrary input state with a bounded total photon number. We show how a dynamical quantum memory can surpass the relevant classical memory bound, while retaining long storage times.

arXiv:0808.2010•Physical Review A•Feb 9, 2009•37 citations

Coherent transfer via parametric control of normal-mode splitting in a superconducting multimode resonator

Kai-I Chu, Xiao-Cheng Lu, Hsin Chang +5 more

Microwave storage and retrieval are essential capabilities for superconducting quantum circuits. Here, we demonstrate an on-chip multimode resonator in which strong parametric modulation induces a large and tunable normal-mode splitting that enables microwave storage. When the spectral bandwidth of a short microwave pulse covers the two dressed-state absorption peaks, part of the pulse is absorbed and undergoes coherent energy exchange between the modes, producing a clear time-domain beating signal. By switching off the modulation before the beating arrives, we realize on-demand storage and retrieval, demonstrating an alternative approach to microwave photonic quantum memory. This parametric-normal-mode-splitting protocol offers a practical route toward a controllable quantum-memory mechanism in superconducting circuits.

quant-pharXiv:2512.15087•Dec 18, 2025•0 citations

Microwave quantum memory represents a critical component for quantum radars and resource-efficient approaches to quantum error correction. Superconducting microwave resonators provide highly efficient storage, long coherence times, on-demand reading, and even memory pulse engineering, but it is still challenging to overcome design and materials induced loss channels for on-chip realization. In this Letter, we present a novel architecture of integrated superconducting quantum memory with a dynamically controlled RF-SQUID coupling element in pulse regime, thus ensuring high efficiency storage and cycling storage time. It demonstrates a memory cycle time of 1.51 μs and 57.5(4)% storage fidelity with preservation of the stored pulse shape during the retrieval at single-photon level excitations. We establish that while the proposed active coupler realization introduces no measurable fidelity degradation, the primary limitation arises from impedance matching and materials imperfections. Still the device was used only for storing finite-duration near-single-photon classical microwave pulses, we assert that it operates as a linear device when the photon population in the common resonator remains low so it should be compatible with quantum state storage. The proposed architecture highlights a disruptive potential for on-chip qubit and memory integration for scalable quantum error correction, while identifying specific avenues for near-unity storage fidelity.

We realize on-demand storage and retrieval of weak coherent microwave photon pulses at the single-photon level. A superconducting multiresonator system which is composed of a set of frequency-tunable coplanar waveguide resonators is implemented as the quantum memory. By dynamically tuning the resonant frequencies of the resonators, we achieve tunable memory bandwidth from 10 to 55 MHz, with well preserved phase coherence. We further demonstrate on-demand storage and retrieval of a time-bin flying qubit. This result opens up a prospect to integrate our chip-based quantum memory with the state-of-the-art superconducting quantum circuit technology for quantum information processing.

A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: by traditionally machining them out of bulk material and by lithographically fabricating them on a chip in thin film. 3D resonators have few loss channels and larger mode volumes, and therefore smaller participations in the lossy parts, but it can be challenging to achieve high material quality. On-chip resonators can use low-loss thin films, but they confine the field more tightly, resulting in higher participations and additional loss channels from the dielectric substrate. In this work, we present a design in which a dielectric scaffold supports a thin-film conductor within a 3D package, thus combining the low surface participations of bulk-machined cavities with high quality and control over materials of thin-film circuits. By incorporating a separate chip containing a transmon qubit, we realize a quantum memory and measure single-photon lifetimes in excess of a millisecond. This hybrid 3D architecture has several advantages for scaling as it relaxes the importance of the package and permits modular construction with separately replaceable qubit and resonator devices.

Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit both to a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. The external coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of

6

with a

Z

-fidelity of

82\%

. We also find that this enhancement is not limited by fundamental constraints.

On-demand quantum memory is an important step towards practical applications in various quantum information tasks such as long-distance entanglement distribution, quantum computation, and quantum networks. In this work, based on stimulated Raman adiabatic passage (STIRAP) protocol, we introduce a controllable delay between the reading pulse and writing pulse so that the quantum state can be stored in the superconducting waveguide and finally retrieved on demand with high fidelity. Through systematic numerical simulations, we find that if the duration of the writing pulse is set to be in a certain range, the readout unit is capable of retrieving the quantum state stored in the waveguide with high fidelity at any moment after a critical time. Moreover, we also investigate the robustness of our protocol, and find that the fidelity is robust against both the average number of thermal photons in the waveguide and the duration of the reading pulse. The numerical results also show that the pulse area in our protocol is only about one third of that in the original STIRAP protocol. Our protocol provides a practical way to combine the advantages of both on-demand quantum memory and the STIRAP protocol.

We propose a dynamical approach to quantum memories using an oscillator-cavity model. This overcomes the known difficulties of achieving high quantum input-output fidelity with long storage times compared to the input signal duration. We use a generic model of the memory response, which is applicable to any linear storage medium ranging from a superconducting device to an atomic medium. The temporal switching or gating of the device may either be through a control field changing the coupling, or through a variable detuning approach, as in more recent quantum memory experiments. An exact calculation of the temporal memory response to an external input is carried out. This shows that there is a mode-matching criterion which determines the optimum input and output pulse time evolution. This optimum pulse shape can be modified by changing the gate characteristics. In addition, there is a critical coupling between the atoms and the cavity that allows high fidelity in the presence of long storage times. The quantum fidelity is calculated both for the coherent state protocol, and for a completely arbitrary input state with a bounded total photon number. We show how a dynamical quantum memory can surpass the relevant classical memory bound, while retaining long storage times.

Microwave storage and retrieval are essential capabilities for superconducting quantum circuits. Here, we demonstrate an on-chip multimode resonator in which strong parametric modulation induces a large and tunable normal-mode splitting that enables microwave storage. When the spectral bandwidth of a short microwave pulse covers the two dressed-state absorption peaks, part of the pulse is absorbed and undergoes coherent energy exchange between the modes, producing a clear time-domain beating signal. By switching off the modulation before the beating arrives, we realize on-demand storage and retrieval, demonstrating an alternative approach to microwave photonic quantum memory. This parametric-normal-mode-splitting protocol offers a practical route toward a controllable quantum-memory mechanism in superconducting circuits.