Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.00199

A chip-scale atomic beam source for non-classical light

B. M. Larsen, Hensley, Hagan, Gabriela D. Martinez, Alexander L. Staron, William McGehee, John E. Kitching, James K. Thompson

Published May 30, 2025• 1 citation
arXivHTMLPDF

Abstract

Room temperature thermal atoms have proven to be a powerful resource for magnetometry, electrometry, atom-entanglement generation, and robust atomic clocks. Recent efforts have sought to realize compact and highly manufacturable atomic vapors and atomic beams for chip-scale magnetometry and atomic clocks. Here, we show that a chip-scale rubidium beam source can be integrated with a high finesse cavity-QED system to generate non-classical light. By demonstrating the compatibility of these two technologies, we open a new path for distributed sources of non-classical light and set the stage for using cavity-QED to enhance the performance of chip-scale magnetometers and atomic clocks.

DOI
10.48550/arxiv.2506.00199

Related papers

Cavity QED With a Chip-Scale Atomic Beam Source

B. M. Larsen, Hagan Hensley, Gabriela D. Martinez +4 more

There has been recent interest in using room-temperature atomic vapors and beams to achieve compact technological solutions, such as chip-scale magnetometry and atomic clocks. Here we integrate a chip-scale rubidium beam source with a high finesse optical cavity to create an atomic cavity-QED system.

•Jan 1, 2026•0 citations

A chip-scale atomic beam for nonclassical light

B. M. Larsen, Hagan Hensley, Gabriela D. Martinez +4 more

Nonclassical light is a critical resource for a broad range of quantum technologies and fundamental science. However, leading platforms such as laser-cooled atoms and solid-state systems both present substantial challenges to scalability due to complexity and spectral drift. Here, we demonstrate a hybrid approach using a chip-scale rubidium beam coupled to a high-finesse cavity-quantum electrodynamics (QED) system. Specifically, we generate nonclassical light and observe optical nonlinearities at the few photon level. This is achieved without degradation of the cavity-QED system. By demonstrating the compatibility of these two technologies, we open a path for distributed sources of nonclassical light and set the stage for using cavity-QED to enhance the performance of chip-scale magnetometers and atomic clocks.

Science Advances•Jun 3, 2026•2 citations

Realizing a non-classical light source with a chip-scale atomic beam via cavity-QED

B. M. Larsen, Hagan Hensley, Gabriela D. Martinez +4 more

Here, we demonstrate the feasibility of interfacing chip-scale atomic beam sources with high-finesse optical cavities to realize integrated cavity-QED systems. By leveraging the nonlinearity of atoms, we use this platform to generate non-classical light.

Frontiers in Optics•Jan 1, 2025•0 citations

Systematic shifts in chip-scale atomic beam clocks

Gabriela D. Martinez, Alexander L. Staron, John E. Kitching +2 more

We report on progress in the characterization of systematic shifts in chip-scale atomic beam clocks, which offer the potential for improved long-term stability relative to existing chip-scale atomic clocks. Previous work has demonstrated the key features of chip-scale atomic beam devices including the use of a microfabricated Si/glass atomic beam cell, passively maintained vacuum environment, and an integrated Rb atomic beam source. A beam clock has been realized using Ramsey coherent population trapping interrogation with a demonstrated short-term fractional frequency stability of ≈ 1.2 × 10^(-9)at 1 s of integration. In this talk, we discuss the path toward long-term stabilty in chip-scale atomic beam clocks and leading clock systematics. Chip-scale atomic beams are a new platform for quantum sensing which offer the potential for long-term stability in compact, low-power applications.

Optical and Quantum Sensing and Precision Metrology II•Mar 13, 2024•0 citations

A Photonic Integrated Light Generation, Control, and Delivery Engine for Creating Cold Atoms

Andrei Isichenko, Calisto Ruiz, Chuan Zhong +7 more

The creation of cold atoms underpins quantum sensing and precision metrology, computing, timekeeping, and fundamental science experiments. Miniaturizing the lasers and optical infrastructure, which occupy over 80% of the volume of these experiments, through photonic integration could improve robustness, reliability, and manufacturability while reducing cost and enabling portable space-based precision measurements and quantum tools for non-experts. Yet, there has been limited progress towards integration of the laser and optical infrastructure required to generate cold atoms onto a single chip. We demonstrate a photonic engine that generates, controls, and delivers precision light to create cold atoms in a rubidium 3-dimensional magneto-optical trap (3D-MOT). We integrate on a single chip two frequency-agile self-injection-locked lasers, laser frequency and intensity control, passive beam combining and splitting, signal monitoring, and high-efficiency beam delivery to a rubidium vapor cell. The integrated engine is shown to support multiple functions required for generating cold atoms including stable generation of low-noise cooling and repump light, frequency control for atom spectroscopy and stabilization, real-time laser monitoring, routing for laser offset locking, optical power modulation, and large-area three-beam delivery of 3 mW to the physics package. Fully electrically controlled, the engine enables sustained 3D-MOT operation, trapping more than 1 million atoms at an average temperature of 350 uK and supporting atom-number and temperature measurements. These results demonstrate the first single-chip integration of light generation, control, and delivery for cold-atom generation, offering a path toward smaller, more robust, and manufacturable cold-atom systems for applications including cold-atom clocks and sensors.

arXiv:2610.17918•Oct 13, 2026•0 citations

Collimated versatile atomic beam source with alkali dispensers

Bochao Wei, Alexandra Crawford, Yorick Andeweg +3 more

Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 °C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications, such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation and moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 °C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on-chip, where a localized, directed source of Rb vapor in small quantities is needed.

arXiv:2202.07076•Applied Physics Letters•Apr 4, 2022•6 citations
Room temperature thermal atoms have proven to be a powerful resource for magnetometry, electrometry, atom-entanglement generation, and robust atomic clocks. Recent efforts have sought to realize compact and highly manufacturable atomic vapors and atomic beams for chip-scale magnetometry and atomic clocks. Here, we show that a chip-scale rubidium beam source can be integrated with a high finesse cavity-QED system to generate non-classical light. By demonstrating the compatibility of these two technologies, we open a new path for distributed sources of non-classical light and set the stage for using cavity-QED to enhance the performance of chip-scale magnetometers and atomic clocks.
Nonclassical light is a critical resource for a broad range of quantum technologies and fundamental science. However, leading platforms such as laser-cooled atoms and solid-state systems both present substantial challenges to scalability due to complexity and spectral drift. Here, we demonstrate a hybrid approach using a chip-scale rubidium beam coupled to a high-finesse cavity-quantum electrodynamics (QED) system. Specifically, we generate nonclassical light and observe optical nonlinearities at the few photon level. This is achieved without degradation of the cavity-QED system. By demonstrating the compatibility of these two technologies, we open a path for distributed sources of nonclassical light and set the stage for using cavity-QED to enhance the performance of chip-scale magnetometers and atomic clocks.
We report on progress in the characterization of systematic shifts in chip-scale atomic beam clocks, which offer the potential for improved long-term stability relative to existing chip-scale atomic clocks. Previous work has demonstrated the key features of chip-scale atomic beam devices including the use of a microfabricated Si/glass atomic beam cell, passively maintained vacuum environment, and an integrated Rb atomic beam source. A beam clock has been realized using Ramsey coherent population trapping interrogation with a demonstrated short-term fractional frequency stability of ≈ 1.2 × 10^(-9)at 1 s of integration. In this talk, we discuss the path toward long-term stabilty in chip-scale atomic beam clocks and leading clock systematics. Chip-scale atomic beams are a new platform for quantum sensing which offer the potential for long-term stability in compact, low-power applications.
The creation of cold atoms underpins quantum sensing and precision metrology, computing, timekeeping, and fundamental science experiments. Miniaturizing the lasers and optical infrastructure, which occupy over 80% of the volume of these experiments, through photonic integration could improve robustness, reliability, and manufacturability while reducing cost and enabling portable space-based precision measurements and quantum tools for non-experts. Yet, there has been limited progress towards integration of the laser and optical infrastructure required to generate cold atoms onto a single chip. We demonstrate a photonic engine that generates, controls, and delivers precision light to create cold atoms in a rubidium 3-dimensional magneto-optical trap (3D-MOT). We integrate on a single chip two frequency-agile self-injection-locked lasers, laser frequency and intensity control, passive beam combining and splitting, signal monitoring, and high-efficiency beam delivery to a rubidium vapor cell. The integrated engine is shown to support multiple functions required for generating cold atoms including stable generation of low-noise cooling and repump light, frequency control for atom spectroscopy and stabilization, real-time laser monitoring, routing for laser offset locking, optical power modulation, and large-area three-beam delivery of 3 mW to the physics package. Fully electrically controlled, the engine enables sustained 3D-MOT operation, trapping more than 1 million atoms at an average temperature of 350 uK and supporting atom-number and temperature measurements. These results demonstrate the first single-chip integration of light generation, control, and delivery for cold-atom generation, offering a path toward smaller, more robust, and manufacturable cold-atom systems for applications including cold-atom clocks and sensors.
Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 °C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications, such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation and moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 °C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on-chip, where a localized, directed source of Rb vapor in small quantities is needed.