© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2505.09417

Gravimetry enhanced by nonreciprocal optomechanical coupling

Dong Xie, Chunling Xu

Published Oct 7, 2025• 0 citations

Abstract

Abstract We explore how to measure the gravitational acceleration by using a dissipative optomechanical cavity. What is quite different from the conventional measurement methods is that we have constructed a nonreciprocal optomechanical coupling. We demonstrate that nonreciprocal coupling has a much greater advantage than reciprocal coupling. When the coherent optomechanical coupling is relatively weak and the driving intensity of single photon is strong, nonreciprocal coupling can improve the measurement precision by a factor of two. When the driving strength of single photon tends to infinity, reciprocal coupling fails to obtain any information about the gravitational acceleration, while nonreciprocal coupling still does. Using a two-photon driving, the measurement uncertainty of the gravitational acceleration will tend to zero as the intensity of two-photon driving approaches the critical point. The critical value of the two-photon driving intensity required for nonreciprocal coupling is finite, but the critical value of the two-photon driving intensity required for reciprocal coupling is infinite. The combination of the amplification of mechanical parameters and the extra force can not improve the measurement precision, but it can enhance the susceptibility. Furthermore, when the single-photon driving field is relatively weak, we analytically calculate the quantum Fisher information. The results show that, under most experimental parameters, nonreciprocal coupling still performs better than reciprocal coupling.

DOI: 10.21203/rs.3.rs-7103089/v1

Related papers

Nonreciprocal Dispersive Coupling for Quantum Sensing

Dong Xie, Chunling Xu

Dispersive coupling is widely utilized for quantum information readout. Most prior studies have concentrated on reciprocal dispersive coupling. Here, we further construct nonreciprocal dispersive coupling and apply it to quantum sensing. For cavity photon number measurement, nonreciprocal dispersive coupling delivers higher precision than its reciprocal counterpart, and this advantage grows more pronounced with an increase in photon number. When directly measuring the single-photon driving strength, however, nonreciprocal dispersive coupling shows no superiority over reciprocal dispersive coupling. By converting the information of driving strength into cavity photon numbers via our proposed strategy, nonreciprocal dispersive coupling again outperforms reciprocal dispersive coupling in precision, with the advantage becoming increasingly significant at larger driving strength. This work presents a novel method to boost quantum sensing and enable the fabrication of ultra-precise quantum sensors.

quant-pharXiv:2606.04666•Jun 4, 2026•0 citations

Quantum Sensing with Cavity Optomechanical Array for Gravimetry: Optimization of Entanglement Transfer

Zeynab Faroughi, Ali Ahanj

‎Improvement of precision in gravimetry is an important problem in detecting the gravitational waves. In The first demonstration of using quantum optomechanical cavity in gravimetry has recently been reported. This experiment has been done by employing a cooled levitated nano-sphere as a mechanical oscillator in its ground state coupled to a cavity electrodynamics. Following this experiment, in a recent proposal, a quantum optomechanical system has been used for ‎measuring‎ of gravitational acceleration. A generic setup for gravimetry purposes, containing two couples optomechanical cavities, where mirrors play the role of oscillating parts. We study such quantum mechanical system, by investigation the dynamics of entanglement between different parts of two coupled cavity optomechanical cells. ‎For such setup, ‎optimal conditions for predesignated entanglement behavior‎, ‎based on some important parameters of the system‎, ‎like photon-photon and photon-phonon couplings‎, ‎electromagnetic field strength and mechanical mode of moving mirrors are analyzed numerically‎. We show that there exist two different behaviors for entanglement according to selected values for the system parameters. ‎‎‎

•Apr 1, 2020•0 citations

Quantum Advantage of One-Way Squeezing in Enhancing Weak-Force Sensing

Wang, Jie, Qian Zhang, Ya‐Feng Jiao +5 more

Cavity optomechanical (COM) sensors, featuring efficient light-motion couplings, have been widely used for ultra sensitive measurements of various physical quantities ranging from displacements to accelerations or weak forces. Previous works, however, have mainly focused on reciprocal COM systems. Here, we propose how to further improve the performance of quantum COM sensors by breaking reciprocal symmetry in purely quantum regime. Specifically, we consider a spinning COM resonator and show that by selectively driving it in opposite directions, highly nonreciprocal optical squeezing can emerge, which in turn provides an efficient way to surpass the standard quantum limit that otherwise exists in conventional reciprocal devices. Our work confirms that breaking reciprocal symmetry, already achieved in diverse systems well beyond spinning systems, can serve as a new strategy to further enhance the abilities of advanced quantum sensors, for applications ranging from testing fundamental physical laws to practical quantum metrology.

arXiv:2403.09979•Mar 15, 2024•0 citations

Quantum sensing with nonreciprocal couplings

Dong Xie, Chunling Xu

Nonreciprocity can not only generate quantum resources but can also shield noise and reverse interference from driving signals. We investigate the advantages of nonreciprocal coupling in sensing a driving signal. In general, we find that nonreciprocal coupling performs better than the corresponding reciprocal coupling. And we show that homodyne measurement is the optimal measurement. A single nonreciprocal coupling can increase measurement precision by up to 2 times. With the use of $N$ nonreciprocal couplings in parallel, the measurement precision can be increased by ${N}^{2}$ times compared with the corresponding reciprocal coupling. In a nonzero-temperature dissipative environment, we demonstrate that nonreciprocal quantum sensing has greater robustness regarding thermal noise than reciprocal quantum sensing.

arXiv:2407.14739•Physical Review Applied•Dec 18, 2024•7 citations

Quantum advantage of one-way squeezing in weak-force sensing

Jie Wang, Qian Zhang, Ya‐Feng Jiao +5 more

Cavity optomechanical (COM) sensors, featuring efficient light–motion couplings, have been widely used for ultrasensitive measurements of various physical quantities ranging from displacements to accelerations or weak forces. Previous works, however, have mainly focused on reciprocal COM systems. Here, we propose how to further improve the performance of quantum COM sensors by breaking reciprocal symmetry in purely quantum regime. Specifically, we consider a spinning COM resonator and show that by selectively driving it in opposite directions, highly nonreciprocal optical squeezing can emerge, which in turn provides an efficient way to surpass the standard quantum limit which is otherwise unattainable for the corresponding reciprocal devices. Our work confirms that breaking reciprocal symmetry, already achieved in diverse systems well beyond spinning systems, can serve as a new strategy to further enhance the abilities of advanced quantum sensors, for applications ranging from testing fundamental physical laws to practical quantum metrology.

Applied Physics Reviews•Jul 30, 2024•38 citations

Nonreciprocal coupling induced entanglement enhancement in a double-cavity optomechanical system

Yuan Yuan Liu, Zhi‐Ming Zhang, Jun‐Hao Liu +2 more

We investigate the quantum entanglement in a double-cavity optomechanical system consisting of an optomechanical cavity and an auxiliary cavity, where the optomechanical cavity mode couples with the mechanical mode via radiation-pressure interaction, and simultaneously couples with the auxiliary cavity mode via nonreciprocal coupling. We study the entanglement between the mechanical oscillator and the cavity modes when the two cavities are reciprocally or nonreciprocally coupled. The logarithmic negativity E n ( 1 ) ( E n ( 2 ) ) is adopted to describe the entanglement degree between the mechanical mode and the optomechanical cavity mode (the auxiliary cavity mode). We find that both E n ( 1 ) and E n ( 2 ) have maximum values in the case of reciprocal coupling. By using nonreciprocal coupling, E n ( 1 ) and E n ( 2 ) can exceed those maximum values, and a wider detuning region where the entanglement exists can be obtained. Moreover, the entanglement robustness with respect to the environment temperature is also effectively enhanced.

Chinese Physics B•Apr 6, 2022•9 citations

Abstract We explore how to measure the gravitational acceleration by using a dissipative optomechanical cavity. What is quite different from the conventional measurement methods is that we have constructed a nonreciprocal optomechanical coupling. We demonstrate that nonreciprocal coupling has a much greater advantage than reciprocal coupling. When the coherent optomechanical coupling is relatively weak and the driving intensity of single photon is strong, nonreciprocal coupling can improve the measurement precision by a factor of two. When the driving strength of single photon tends to infinity, reciprocal coupling fails to obtain any information about the gravitational acceleration, while nonreciprocal coupling still does. Using a two-photon driving, the measurement uncertainty of the gravitational acceleration will tend to zero as the intensity of two-photon driving approaches the critical point. The critical value of the two-photon driving intensity required for nonreciprocal coupling is finite, but the critical value of the two-photon driving intensity required for reciprocal coupling is infinite. The combination of the amplification of mechanical parameters and the extra force can not improve the measurement precision, but it can enhance the susceptibility. Furthermore, when the single-photon driving field is relatively weak, we analytically calculate the quantum Fisher information. The results show that, under most experimental parameters, nonreciprocal coupling still performs better than reciprocal coupling.

Dispersive coupling is widely utilized for quantum information readout. Most prior studies have concentrated on reciprocal dispersive coupling. Here, we further construct nonreciprocal dispersive coupling and apply it to quantum sensing. For cavity photon number measurement, nonreciprocal dispersive coupling delivers higher precision than its reciprocal counterpart, and this advantage grows more pronounced with an increase in photon number. When directly measuring the single-photon driving strength, however, nonreciprocal dispersive coupling shows no superiority over reciprocal dispersive coupling. By converting the information of driving strength into cavity photon numbers via our proposed strategy, nonreciprocal dispersive coupling again outperforms reciprocal dispersive coupling in precision, with the advantage becoming increasingly significant at larger driving strength. This work presents a novel method to boost quantum sensing and enable the fabrication of ultra-precise quantum sensors.

‎Improvement of precision in gravimetry is an important problem in detecting the gravitational waves. In The first demonstration of using quantum optomechanical cavity in gravimetry has recently been reported. This experiment has been done by employing a cooled levitated nano-sphere as a mechanical oscillator in its ground state coupled to a cavity electrodynamics. Following this experiment, in a recent proposal, a quantum optomechanical system has been used for ‎measuring‎ of gravitational acceleration. A generic setup for gravimetry purposes, containing two couples optomechanical cavities, where mirrors play the role of oscillating parts. We study such quantum mechanical system, by investigation the dynamics of entanglement between different parts of two coupled cavity optomechanical cells. ‎For such setup, ‎optimal conditions for predesignated entanglement behavior‎, ‎based on some important parameters of the system‎, ‎like photon-photon and photon-phonon couplings‎, ‎electromagnetic field strength and mechanical mode of moving mirrors are analyzed numerically‎. We show that there exist two different behaviors for entanglement according to selected values for the system parameters. ‎‎‎

Cavity optomechanical (COM) sensors, featuring efficient light-motion couplings, have been widely used for ultra sensitive measurements of various physical quantities ranging from displacements to accelerations or weak forces. Previous works, however, have mainly focused on reciprocal COM systems. Here, we propose how to further improve the performance of quantum COM sensors by breaking reciprocal symmetry in purely quantum regime. Specifically, we consider a spinning COM resonator and show that by selectively driving it in opposite directions, highly nonreciprocal optical squeezing can emerge, which in turn provides an efficient way to surpass the standard quantum limit that otherwise exists in conventional reciprocal devices. Our work confirms that breaking reciprocal symmetry, already achieved in diverse systems well beyond spinning systems, can serve as a new strategy to further enhance the abilities of advanced quantum sensors, for applications ranging from testing fundamental physical laws to practical quantum metrology.

Nonreciprocity can not only generate quantum resources but can also shield noise and reverse interference from driving signals. We investigate the advantages of nonreciprocal coupling in sensing a driving signal. In general, we find that nonreciprocal coupling performs better than the corresponding reciprocal coupling. And we show that homodyne measurement is the optimal measurement. A single nonreciprocal coupling can increase measurement precision by up to 2 times. With the use of

N

nonreciprocal couplings in parallel, the measurement precision can be increased by

{N}^{2}

times compared with the corresponding reciprocal coupling. In a nonzero-temperature dissipative environment, we demonstrate that nonreciprocal quantum sensing has greater robustness regarding thermal noise than reciprocal quantum sensing.

Cavity optomechanical (COM) sensors, featuring efficient light–motion couplings, have been widely used for ultrasensitive measurements of various physical quantities ranging from displacements to accelerations or weak forces. Previous works, however, have mainly focused on reciprocal COM systems. Here, we propose how to further improve the performance of quantum COM sensors by breaking reciprocal symmetry in purely quantum regime. Specifically, we consider a spinning COM resonator and show that by selectively driving it in opposite directions, highly nonreciprocal optical squeezing can emerge, which in turn provides an efficient way to surpass the standard quantum limit which is otherwise unattainable for the corresponding reciprocal devices. Our work confirms that breaking reciprocal symmetry, already achieved in diverse systems well beyond spinning systems, can serve as a new strategy to further enhance the abilities of advanced quantum sensors, for applications ranging from testing fundamental physical laws to practical quantum metrology.

We investigate the quantum entanglement in a double-cavity optomechanical system consisting of an optomechanical cavity and an auxiliary cavity, where the optomechanical cavity mode couples with the mechanical mode via radiation-pressure interaction, and simultaneously couples with the auxiliary cavity mode via nonreciprocal coupling. We study the entanglement between the mechanical oscillator and the cavity modes when the two cavities are reciprocally or nonreciprocally coupled. The logarithmic negativity E n ( 1 ) ( E n ( 2 ) ) is adopted to describe the entanglement degree between the mechanical mode and the optomechanical cavity mode (the auxiliary cavity mode). We find that both E n ( 1 ) and E n ( 2 ) have maximum values in the case of reciprocal coupling. By using nonreciprocal coupling, E n ( 1 ) and E n ( 2 ) can exceed those maximum values, and a wider detuning region where the entanglement exists can be obtained. Moreover, the entanglement robustness with respect to the environment temperature is also effectively enhanced.