Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2505.03008 · Physical Review A

Magneto-optical-trap loading in a large optical-access experiment

Marius Gaudesius, J. M. Lee, Luke A. Kraft, J. C. Gordon, Grant W. Biedermann

Published Dec 23, 2025• 0 citations
arXivHTMLPDF

Abstract

We present an experimental, numerical, and analytical study of strontium magneto-optical trap (MOT) loading from a cold atomic beam in a configuration optimized for high numerical aperture optical tweezers. Our approach orients the beam flow along the MOT symmetry axis to reduce the experimental complexity and maximize the overall optical access into the scientific region of study. We use a moving molasses technique to enable this configuration and show that its performance depends critically on metastable-state shelving (to 5s5p 3P2) during the atom transfer to the three-dimensional (3D) MOT. Furthermore, we find that the parameters for optimal transfer efficiency are bounded by dark-state loss (to 5s5p 3P0) in the trap region where repumping is present. These observations are verified to great degree of accuracy using both our developed analytical and numerical models. The corresponding 3D simulation tool is used to perform a comprehensive study of the trap loading dynamics, beginning at the oven exit and ending at the 3D MOT, demonstrating its effectiveness in optimizing an effusive oven experiment.

DOI
10.1103/n8p5-b876

Related papers

Efficient Loading of an Yb MOT on the 1S0 → 1P1 Transition

Zhufang Zhao, Shunxiang Wang, Jun Jian +5 more

We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.

Photonics•Oct 28, 2025•1 citation

Comparison between 403 nm and 497 nm repumping schemes for strontium magneto-optical traps

Paulo Hisao Moriya, M. Araujo, Fagner R. Todão +5 more

The theoretical description of the external degrees of freedom of atoms trapped inside a magneto-optical trap (MOT) often relies on the decoupling of the evolution of the internal and external degrees of freedom. That is possible thanks to much shorter timescales typically associated with the first ones. The electronic structure of alkaline-earth atoms, on the other hand, presents ultra-narrow transitions and metastable states that makes such an approximation invalid in the general case. In this article, we report on a model based on open Bloch equations for the evolution of the number of atoms in a magneto-optical trap. With this model we investigate the loading of the strontium blue magneto-optical trap under different repumping schemes, either directly from a Zeeman slower, or from an atomic reservoir made of atoms in a metastable state trapped in the magnetic quadrupolar field. The fluorescence observed on the strong 461~nm transition is recorded and quantitatively compared with the results from our simulations. The comparison between experimental results and calculations within our model allowed to identify the existence of the decay paths between the upper level of the repumping transition and the dark strontium metastable states, which could not be explained by electric dipole transition rates calculated in the literature. Moreover, our analysis pinpoints the role of the atomic movement in limiting the efficiency of the atomic repumping of the Sr metastable states.

arXiv:1806.09176•Jun 24, 2018•1 citation

A high-flux source of cold strontium with a loading rate of 4×1010 atoms/s for open release

Thomas Walker, A. L. Marchant, Elliot Bentine +17 more

We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of 4×1010 atoms/s—to our knowledge, the highest reported loading flux for strontium. To characterize the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 s, depending on the oven temperature. Finally, we characterize the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show that it is possible to readily produce a cold strontium flux at comparable levels to those of alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost to benefit researchers in the quantum community.

arXiv:2603.25312•AVS Quantum Science•Jul 10, 2026•0 citations

Two-dimensional magneto-optical trap as a source for cold strontium atoms

Ingo Nosske, Luc Couturier, Fachao Hu +6 more

We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding ${10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}$ at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to ${10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}$ without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.

Physical Review A•Nov 15, 2017•56 citations

Comparison between 403 nm and 497 nm repumping schemes for strontium magneto-optical traps

Paulo Hisao Moriya, M. Araujo, Fagner R. Todão +5 more

The theoretical description of the external degrees of freedom of atoms trapped inside a magnetooptical trap (MOT) often relies on the decoupling of the evolution of the internal and external degrees of freedom.That is possible thanks to much shorter timescales typically associated with the first ones.The electronic structure of alkaline-earth atoms, on the other hand, presents ultra-narrow transitions and metastable states that makes such an approximation invalid in the general case.In this article, we report on a model based on open Bloch equations for the evolution of the number of atoms in a magneto-optical trap.With this model we investigate the loading of the strontium blue magnetooptical trap under different repumping schemes, either directly from a Zeeman slower, or from an atomic reservoir made of atoms in a metastable state trapped in the magnetic quadrupolar field.The fluorescence observed on the strong 461 nm transition is recorded and quantitatively compared with the results from our simulations.The comparison between experimental results and calculations within our model allowed to identify the existence of the decay paths between the upper level of the repumping transition and the dark strontium metastable states, which could not be explained by electric dipole transition rates calculated in the literature.Moreover, our analysis pinpoints the role of the atomic movement in limiting the efficiency of the atomic repumping of the Sr metastable states.

Journal of Physics Communications•Dec 6, 2018•21 citations

Loading an optical dipole trap

S. J. M. Kuppens, Kristan L. Corwin, Kurt W. Miller +2 more

We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.

Physical Review A•Jun 13, 2000•185 citations
We present an experimental, numerical, and analytical study of strontium magneto-optical trap (MOT) loading from a cold atomic beam in a configuration optimized for high numerical aperture optical tweezers. Our approach orients the beam flow along the MOT symmetry axis to reduce the experimental complexity and maximize the overall optical access into the scientific region of study. We use a moving molasses technique to enable this configuration and show that its performance depends critically on metastable-state shelving (to 5s5p 3P2) during the atom transfer to the three-dimensional (3D) MOT. Furthermore, we find that the parameters for optimal transfer efficiency are bounded by dark-state loss (to 5s5p 3P0) in the trap region where repumping is present. These observations are verified to great degree of accuracy using both our developed analytical and numerical models. The corresponding 3D simulation tool is used to perform a comprehensive study of the trap loading dynamics, beginning at the oven exit and ending at the 3D MOT, demonstrating its effectiveness in optimizing an effusive oven experiment.
We demonstrate efficient loading of an Yb three-dimensional magneto-optical trap (3D MOT) on the 1S0 → 1P1 transition. The experiment employs a two-dimensional magneto-optical trap (2D MOT) as an efficient cold atom source. Through optimization of the 2D MOT, auxiliary Zeeman slower, and push beam parameters that govern atomic capture, we achieve an atomic loading rate of 5 × 106 atoms/s in the 3D MOT, with approximately ∼107 trapped atoms. Our experimental results confirm the successful transfer of a substantial number of atoms from the 2D region to the science chamber via the push beam, providing an experimental foundation for subsequent implementation of narrow-line MOT and two-color MOT.
The theoretical description of the external degrees of freedom of atoms trapped inside a magneto-optical trap (MOT) often relies on the decoupling of the evolution of the internal and external degrees of freedom. That is possible thanks to much shorter timescales typically associated with the first ones. The electronic structure of alkaline-earth atoms, on the other hand, presents ultra-narrow transitions and metastable states that makes such an approximation invalid in the general case. In this article, we report on a model based on open Bloch equations for the evolution of the number of atoms in a magneto-optical trap. With this model we investigate the loading of the strontium blue magneto-optical trap under different repumping schemes, either directly from a Zeeman slower, or from an atomic reservoir made of atoms in a metastable state trapped in the magnetic quadrupolar field. The fluorescence observed on the strong 461~nm transition is recorded and quantitatively compared with the results from our simulations. The comparison between experimental results and calculations within our model allowed to identify the existence of the decay paths between the upper level of the repumping transition and the dark strontium metastable states, which could not be explained by electric dipole transition rates calculated in the literature. Moreover, our analysis pinpoints the role of the atomic movement in limiting the efficiency of the atomic repumping of the Sr metastable states.
We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of 4×1010 atoms/s—to our knowledge, the highest reported loading flux for strontium. To characterize the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 s, depending on the oven temperature. Finally, we characterize the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show that it is possible to readily produce a cold strontium flux at comparable levels to those of alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost to benefit researchers in the quantum community.
We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding 109atoms/s{10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to 109atoms/s{10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.
The theoretical description of the external degrees of freedom of atoms trapped inside a magnetooptical trap (MOT) often relies on the decoupling of the evolution of the internal and external degrees of freedom.That is possible thanks to much shorter timescales typically associated with the first ones.The electronic structure of alkaline-earth atoms, on the other hand, presents ultra-narrow transitions and metastable states that makes such an approximation invalid in the general case.In this article, we report on a model based on open Bloch equations for the evolution of the number of atoms in a magneto-optical trap.With this model we investigate the loading of the strontium blue magnetooptical trap under different repumping schemes, either directly from a Zeeman slower, or from an atomic reservoir made of atoms in a metastable state trapped in the magnetic quadrupolar field.The fluorescence observed on the strong 461 nm transition is recorded and quantitatively compared with the results from our simulations.The comparison between experimental results and calculations within our model allowed to identify the existence of the decay paths between the upper level of the repumping transition and the dark strontium metastable states, which could not be explained by electric dipole transition rates calculated in the literature.Moreover, our analysis pinpoints the role of the atomic movement in limiting the efficiency of the atomic repumping of the Sr metastable states.
We present a detailed experimental study of the physics involved in transferring atoms from a magneto-optical trap (MOT) to an optical dipole trap. The loading is a dynamical process determined by a loading rate and a density dependent loss rate. The loading rate depends on cooling and the flux of atoms into the trapping volume, and the loss rate is due to excited state collisions induced by the MOT light fields. From this study we found ways to optimize the loading of the optical dipole trap. Key ingredients for maximum loading are found to be a reduction of the hyperfine repump intensity, increased detuning of the MOT light, and a displacement of the optical dipole trap center with respect to the MOT. A factor of 2 increase in the number of loaded atoms is demonstrated by using a hyperfine repump beam with a shadow in it. In this way we load $8\ifmmode\times\else\texttimes\fi{}{10}^{6}{}^{85}\mathrm{Rb}$ atoms into a 1 mK deep optical dipole trap with a waist of $58 \ensuremath{\mu}\mathrm{m},$ which is 40% of the atoms initially trapped in the MOT.