Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.21251 · Journal of Applied Physics

On-chip superconducting microwave frequency divider

Hui Zhu Wang, Chih-Yao Shih, Ching-Yeh Chen, Yan-Jun Zhao, Xun‐Wei Xu, Jaw-Shen Tsai

Published Jul 22, 2026• 0 citations
arXivHTMLPDF

Abstract

We propose an on-chip superconducting microwave frequency divider based on the simultaneous excitation of two superconducting qubits by a single photon. The proposed circuit consists of two flux qubits and three superconducting resonators. A high-frequency photon stored in the input resonator simultaneously excites two qubits through an effective three-body interaction, and the excitation energy is subsequently transferred into two low-frequency resonators. As a result, one high-frequency microwave signal can be divided into two spatially separated low-frequency output signals. The continuous-wave output, conversion efficiency, and controllable pulse outputs of the proposed device are analyzed numerically using the master-equation approach. Compared with conventional nonlinear frequency-conversion schemes, the proposed device naturally generates spatially separated output channels, which may simplify microwave signal routing in superconducting quantum processors.

DOI
10.1063/5.0312600

Related papers

Superconducting Qubit Network as a Single Microwave Photon Detector for Galactic Axion Search

Emanuele Enrico, C. Bonavolontà, G. Brida +13 more

Experimental search of galactic axions requires detection of single photons in the microwave range. We work on a novel approach to detect single microwave photons based on a coherent collective response of quantum states occurring in a superconducting qubit network (SQN) embedded in a lowdissipative superconducting resonator. We propose a two resonators detector configuration with two parallel resonators without common part and with separated input and output terminals. The device consists of a low-dissipative resonator with embedded SQN in which microwave photons arrive (“signal resonator”), and a transmission line for measuring the frequency dependent transmission coefficient demonstrating resonant drops at the qubit frequencies (“readout resonator”). In comparison with T-type three terminal device recently proposed and investigated by us, the device with two resonators with separated input and output terminals doesn't contain common part of both resonators and exclude an unwanted noise from measurement readout circuits to the signal resonator. A layout of two resonators four terminal SQN detectors containing 5 flux qubits weakly coupled to a low-dissipative signal and readout resonator was developed and optimized. The samples were fabricated by Manhattan Al-based technology with Nb resonator circuits. The SQN detector was experimentally tested in terms of microwave measurements of scattering parameters of both resonators, and crosstalk properties. Comparison of experimental data with results of the simulations permits one to conclude that the electromagnetic conditions of the fundamental resonant peak of 8.5 GHz of both resonators aren't affected by the crosstalk phenomenon and their performances provided by the design remain not altered for correct device operation

IEEE Transactions on Applied Superconductivity•Dec 8, 2023•1 citation

RSFQ based microwave controller for qubit

Raihan Rafique, Thomas Ohki, Henrik Engseth +1 more

We present a Rapid Single Flux Quantum (RSFQ) microwave controller for superconducting qubits. Applying microwaves from room temperature sources is the conventional approach to excite quantum state transitions. Finding a method to apply short microwave bursts with a narrow linewidth is a challenge for on-chip Josephson based oscillators. We present a scheme containing an RSFQ pulse generator, ultra narrowband filter, SQUID based resonator and coupler. The operating frequency of the designed controller is 3-6 GHz. The unique feature of this design is a SQUID based resonator. By varying magnetic field in the SQUID, the\nresonance length can be varied between λ/4 and λ/2. The\nresonator is added as a shunt between the filter and coupler. Transmission of microwave signals from the filter to the output is determined by the shunt resonance. RSFQ T flip-flop circuit is designed to control the magnetic field applied to the SQUID in the resonator. Miniaturization of the coupler of 2-10 GHz has been done using a quasi-lumped element designed. We present the simulations results for the frequency response of\ndifferent resonance lengths of the modulator.

•Jan 1, 2007•1 citation

Multiple-output microwave single-photon source using superconducting circuits with longitudinal and transverse couplings

Xin Wang, Adam Miranowicz, Hongrong Li +1 more

Single-photon devices at microwave frequencies are important for applications in quantum information processing and communication in the microwave regime. In this work we describe a proposal of a multioutput single-photon device. We consider two superconducting resonators coupled to a gap-tunable qubit via both its longitudinal and transverse degrees of freedom. Thus, this qubit-resonator coupling differs from the coupling in standard circuit quantum-electrodynamic systems described by the Jaynes-Cummings model. We demonstrate that an effective quadratic coupling between one of the normal modes and the qubit can be induced and this induced second-order nonlinearity is much larger than that for conventional Kerr-type systems exhibiting photon blockade. Assuming that a coupled normal mode is resonantly driven, we observe that the output fields from the resonators exhibit strong sub-Poissonian photon-number statistics and photon antibunching. Contrary to previous studies on resonant photon blockade, the first-excited state of our device is a pure single-photon Fock state rather than a polariton state, i.e., a highly hybridized qubit-photon state. In addition, it is found that the optical state truncation caused by the strong qubit-induced nonlinearity can lead to an entanglement between the two resonators, even in their steady state under the Markov approximation.

arXiv:1607.08730•Physical Review A•Nov 30, 2016•40 citations

Continuous-Wave Single-Photon Transistor Based on a Superconducting Circuit

Oleksandr Kyriienko, Anders Søndberg Sørensen

We propose a microwave frequency single-photon transistor which can operate under continuous wave probing and represents an efficient single microwave photon detector. It can be realized using an impedance matched system of a three level artificial ladder-type atom coupled to two microwave cavities connected to input-output waveguides. Using a classical drive on the upper transition, we find parameter space where a single photon control pulse incident on one of the cavities can be fully absorbed into hybridized excited states. This subsequently leads to series of quantum jumps in the upper manifold and the appearance of a photon flux leaving the second cavity through a separate input-output port. The proposal does not require time variation of the probe signals, thus corresponding to a passive version of a single-photon transistor. The resulting device is robust to qubit dephasing processes, possesses low dark count rate for large anharmonicity, and can be readily implemented using current technology.

arXiv:1603.06615•Physical Review Letters•Sep 28, 2016•58 citations

Generation of Frequency-Tunable Shaped Single Microwave Photons Using a Fixed-Frequency Superconducting Qubit

Takeaki Miyamura, Yoshiki Sunada, Zhiling Wang +3 more

Scaling up a superconducting quantum computer will likely require quantum communication between remote chips, which can be implemented using an itinerant microwave photon in a transmission line. To realize high-fidelity communication, it is essential to control the frequency and temporal shape of the microwave photon. In this work, we demonstrate the generation of frequency-tunable shaped microwave photons without resorting to any frequency-tunable circuit element. We develop a framework that treats a microwave resonator as a band-pass filter mediating the interaction between a superconducting qubit and the modes in the transmission line. This interpretation allows us to stimulate the photon emission by an off-resonant drive signal. We characterize how the frequency and temporal shape of the generated photon depends on the frequency and amplitude of the drive signal. By modulating the drive amplitude and frequency, we achieve a frequency tunability of 40 MHz while maintaining the photon mode shape time symmetric. Through measurements of the quadrature amplitudes of the emitted photons, we demonstrate a consistently high state and process fidelities around 95% across the tunable frequency range. Our hardware-efficient approach eliminates the need for additional biasing lines typically required for frequency tuning, offering a simplified architecture for scalable quantum communication.

arXiv:2503.05536•PRX Quantum•Jun 9, 2025•5 citations

Frequency up/down conversion by multiphoton pumping in superconducting qubit circuits

Hossein Zolfghari Jooya, Guozhu Sun, J Pan +2 more

Abstract We propose a versatile scheme for multiphoton frequency up/down conversion in flux superconducting qubit circuits, driven by a pair of microwaves tuned near and far off the qubit resonance. Flux qubits can be engineered with strong anharmonicity such that the two lowest eigenstates are energetically well separated from the higher ones. We demonstrate the high order non-linear transitions between the two lowest levels in the three-photon regime, by coupling the qubit to bichromatic microwave fields with the same Rabi frequencies. Both up and down conversions are presented and accurately interpreted with many-mode Floquet formalism. An intuitive graph theoretic approach elucidates the physics of multiphoton pumping and population trapping. The analytical solutions also illustrate how controllability is achievable for desired single- or multiphoton pumping processes in a wide range of frequencies. The proposed design and theoretical approach are applicable in maintaining the inter-connectivity of future superconducting quantum machines.

Journal of Physics B Atomic Molecular and Optical Physics•May 11, 2020•0 citations
We propose an on-chip superconducting microwave frequency divider based on the simultaneous excitation of two superconducting qubits by a single photon. The proposed circuit consists of two flux qubits and three superconducting resonators. A high-frequency photon stored in the input resonator simultaneously excites two qubits through an effective three-body interaction, and the excitation energy is subsequently transferred into two low-frequency resonators. As a result, one high-frequency microwave signal can be divided into two spatially separated low-frequency output signals. The continuous-wave output, conversion efficiency, and controllable pulse outputs of the proposed device are analyzed numerically using the master-equation approach. Compared with conventional nonlinear frequency-conversion schemes, the proposed device naturally generates spatially separated output channels, which may simplify microwave signal routing in superconducting quantum processors.
Experimental search of galactic axions requires detection of single photons in the microwave range. We work on a novel approach to detect single microwave photons based on a coherent collective response of quantum states occurring in a superconducting qubit network (SQN) embedded in a lowdissipative superconducting resonator. We propose a two resonators detector configuration with two parallel resonators without common part and with separated input and output terminals. The device consists of a low-dissipative resonator with embedded SQN in which microwave photons arrive (“signal resonator”), and a transmission line for measuring the frequency dependent transmission coefficient demonstrating resonant drops at the qubit frequencies (“readout resonator”). In comparison with T-type three terminal device recently proposed and investigated by us, the device with two resonators with separated input and output terminals doesn't contain common part of both resonators and exclude an unwanted noise from measurement readout circuits to the signal resonator. A layout of two resonators four terminal SQN detectors containing 5 flux qubits weakly coupled to a low-dissipative signal and readout resonator was developed and optimized. The samples were fabricated by Manhattan Al-based technology with Nb resonator circuits. The SQN detector was experimentally tested in terms of microwave measurements of scattering parameters of both resonators, and crosstalk properties. Comparison of experimental data with results of the simulations permits one to conclude that the electromagnetic conditions of the fundamental resonant peak of 8.5 GHz of both resonators aren't affected by the crosstalk phenomenon and their performances provided by the design remain not altered for correct device operation
We present a Rapid Single Flux Quantum (RSFQ) microwave controller for superconducting qubits. Applying microwaves from room temperature sources is the conventional approach to excite quantum state transitions. Finding a method to apply short microwave bursts with a narrow linewidth is a challenge for on-chip Josephson based oscillators. We present a scheme containing an RSFQ pulse generator, ultra narrowband filter, SQUID based resonator and coupler. The operating frequency of the designed controller is 3-6 GHz. The unique feature of this design is a SQUID based resonator. By varying magnetic field in the SQUID, the\nresonance length can be varied between λ/4 and λ/2. The\nresonator is added as a shunt between the filter and coupler. Transmission of microwave signals from the filter to the output is determined by the shunt resonance. RSFQ T flip-flop circuit is designed to control the magnetic field applied to the SQUID in the resonator. Miniaturization of the coupler of 2-10 GHz has been done using a quasi-lumped element designed. We present the simulations results for the frequency response of\ndifferent resonance lengths of the modulator.
Single-photon devices at microwave frequencies are important for applications in quantum information processing and communication in the microwave regime. In this work we describe a proposal of a multioutput single-photon device. We consider two superconducting resonators coupled to a gap-tunable qubit via both its longitudinal and transverse degrees of freedom. Thus, this qubit-resonator coupling differs from the coupling in standard circuit quantum-electrodynamic systems described by the Jaynes-Cummings model. We demonstrate that an effective quadratic coupling between one of the normal modes and the qubit can be induced and this induced second-order nonlinearity is much larger than that for conventional Kerr-type systems exhibiting photon blockade. Assuming that a coupled normal mode is resonantly driven, we observe that the output fields from the resonators exhibit strong sub-Poissonian photon-number statistics and photon antibunching. Contrary to previous studies on resonant photon blockade, the first-excited state of our device is a pure single-photon Fock state rather than a polariton state, i.e., a highly hybridized qubit-photon state. In addition, it is found that the optical state truncation caused by the strong qubit-induced nonlinearity can lead to an entanglement between the two resonators, even in their steady state under the Markov approximation.
We propose a microwave frequency single-photon transistor which can operate under continuous wave probing and represents an efficient single microwave photon detector. It can be realized using an impedance matched system of a three level artificial ladder-type atom coupled to two microwave cavities connected to input-output waveguides. Using a classical drive on the upper transition, we find parameter space where a single photon control pulse incident on one of the cavities can be fully absorbed into hybridized excited states. This subsequently leads to series of quantum jumps in the upper manifold and the appearance of a photon flux leaving the second cavity through a separate input-output port. The proposal does not require time variation of the probe signals, thus corresponding to a passive version of a single-photon transistor. The resulting device is robust to qubit dephasing processes, possesses low dark count rate for large anharmonicity, and can be readily implemented using current technology.
Scaling up a superconducting quantum computer will likely require quantum communication between remote chips, which can be implemented using an itinerant microwave photon in a transmission line. To realize high-fidelity communication, it is essential to control the frequency and temporal shape of the microwave photon. In this work, we demonstrate the generation of frequency-tunable shaped microwave photons without resorting to any frequency-tunable circuit element. We develop a framework that treats a microwave resonator as a band-pass filter mediating the interaction between a superconducting qubit and the modes in the transmission line. This interpretation allows us to stimulate the photon emission by an off-resonant drive signal. We characterize how the frequency and temporal shape of the generated photon depends on the frequency and amplitude of the drive signal. By modulating the drive amplitude and frequency, we achieve a frequency tunability of 40 MHz while maintaining the photon mode shape time symmetric. Through measurements of the quadrature amplitudes of the emitted photons, we demonstrate a consistently high state and process fidelities around 95% across the tunable frequency range. Our hardware-efficient approach eliminates the need for additional biasing lines typically required for frequency tuning, offering a simplified architecture for scalable quantum communication.
Abstract We propose a versatile scheme for multiphoton frequency up/down conversion in flux superconducting qubit circuits, driven by a pair of microwaves tuned near and far off the qubit resonance. Flux qubits can be engineered with strong anharmonicity such that the two lowest eigenstates are energetically well separated from the higher ones. We demonstrate the high order non-linear transitions between the two lowest levels in the three-photon regime, by coupling the qubit to bichromatic microwave fields with the same Rabi frequencies. Both up and down conversions are presented and accurately interpreted with many-mode Floquet formalism. An intuitive graph theoretic approach elucidates the physics of multiphoton pumping and population trapping. The analytical solutions also illustrate how controllability is achievable for desired single- or multiphoton pumping processes in a wide range of frequencies. The proposed design and theoretical approach are applicable in maintaining the inter-connectivity of future superconducting quantum machines.