Quantum error mitigation (QEM) is critical in reducing the impact of noise in the pre-fault-tolerant era, and is expected to complement error correction in fault-tolerant quantum computing (FTQC). In this paper, we propose a novel QEM approach, Q-Cluster, that uses unsupervised learning (clustering) to reshape the measured bit-string distribution. Our approach starts with a simplified bit-flip noise model. It first performs clustering on noisy measurement results, i.e., bit-strings, based on the Hamming distance. The centroid of each cluster is calculated using a qubit-wise majority vote. Next, the noisy distribution is adjusted with the clustering outcomes and the bitflip error rates using Bayesian inference. Our simulation results show that Q-Cluster can mitigate high noise rates (up to 40% per qubit) with the simple bit-flip noise model. However, real quantum computers do not fit such a simple noise model. To address the problem, we (a) apply Pauli twirling to tailor the complex noise channels to Pauli errors, and (b) employ a machine learning model, ExtraTrees regressor, to estimate an effective bit-flip error rate using a feature vector consisting of machine calibration data (gate & measurement error rates), circuit features (number of qubits, numbers of different types of gates, etc.) and the shape of the noisy distribution (entropy). Our experimental results show that our proposed Q-Cluster scheme improves the fidelity by a factor of 1.46x, on average, compared to the unmitigated output distribution, for a set of low-entropy benchmarks on five different IBM quantum machines. Our approach outperforms the state-of-art QEM approaches RZNE [28], M3 [24], Hammer [35], and QBEEP [33] by$1.26 \mathrm{x}, 1.29 \mathrm{x}, 1.47 \mathrm{x}$, and 2.65 x, respectively.
Quantum error mitigation (QEM) is critical in reducing the impact of noise in the pre-fault-tolerant era, and is expected to complement error correction in fault-tolerant quantum computing (FTQC). In this paper, we propose a novel QEM approach, Q-Cluster, that uses unsupervised learning (clustering) to reshape the measured bit-string distribution. Our approach starts with a simplified bit-flip noise model. It first performs clustering on noisy measurement results, i.e., bit-strings, based on the Hamming distance. The centroid of each cluster is calculated using a qubit-wise majority vote. Next, the noisy distribution is adjusted with the clustering outcomes and the bitflip error rates using Bayesian inference. Our simulation results show that Q-Cluster can mitigate high noise rates (up to 40% per qubit) with the simple bit-flip noise model. However, real quantum computers do not fit such a simple noise model. To address the problem, we (a) apply Pauli twirling to tailor the complex noise channels to Pauli errors, and (b) employ a machine learning model, ExtraTrees regressor, to estimate an effective bit-flip error rate using a feature vector consisting of machine calibration data (gate & measurement error rates), circuit features (number of qubits, numbers of different types of gates, etc.) and the shape of the noisy distribution (entropy). Our experimental results show that our proposed Q-Cluster scheme improves the fidelity by a factor of 1.46x, on average, compared to the unmitigated output distribution, for a set of low-entropy benchmarks on five different IBM quantum machines. Our approach outperforms the state-of-art QEM approaches RZNE [28], M3 [24], Hammer [35], and QBEEP [33] by1.26x,1.29x,1.47x, and 2.65 x, respectively.
In the noisy intermediate-scale quantum (NISQ) era, quantum error mitigation (QEM) is essential for producing reliable outputs from quantum circuits. We present a statistical signal processing approach to QEM that estimates the most likely noiseless outputs from noisy quantum measurements. Our model assumes that circuit depth is sufficient for depolarizing noise, producing corrupted observations that resemble a uniform distribution alongside classical bit-flip errors from readout. Our method consists of two steps: a filtering stage that discards uninformative depolarizing noise and an expectation-maximization (EM) algorithm that computes a maximum likelihood (ML) estimate over the remaining data. We demonstrate the effectiveness of this approach on small-qubit systems using circuit simulations in Qiskit and IBM quantum processing unit (QPU) data, and compare its performance to contemporary statistical QEM techniques. We also show that our method scales to larger qubit counts using synthetically generated data consistent with our noise model. These results suggest that principled statistical methods can offer scalable and interpretable solutions for quantum error mitigation in realistic NISQ settings.
Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.
The field of quantum computing has experienced a rapid expansion in recent years, with ongoing exploration of new technologies, a decrease in error rates, and a growth in the number of qubits available in quantum processors. However, near-term quantum algorithms are still unable to be induced without compounding consequential levels of noise, leading to non-trivial erroneous results. Quantum Error Correction and Mitigation are rapidly advancing areas of research in the quantum computing landscape, with a goal of reducing errors. IBM has recently emphasized that Quantum Error Mitigation is the key to unlocking the full potential of quantum computing. A recent work, namely HAMMER, demonstrated the existence of a latent structure regarding post-circuit induction errors when mapping to the Hamming spectrum. However, they assumed that errors occur solely in local clusters, whereas we observe that at higher average Hamming distances this structure falls away. Our study demonstrates that the correlated structure is not just limited to local patterns, but it also encompasses certain non-local clustering patterns that can be accurately characterized through a Poisson distribution model. This model takes into account the input circuit, the current state of the device, including calibration statistics, and the qubit topology. Using this quantum error characterizing model, we developed an iterative algorithm over the generated Bayesian network state-graph for post-induction error mitigation. Our Q-Beep approach delivers state-of-the-art results, thanks to its problem-aware modeling of the error distribution's underlying structure and the implementation of an Bayesian network state-graph. This has resulted in an increase of up to 234.6% in circuit execution accuracy on BV circuits and an average improvement of 71.0% in the quality of QAOA solutions when tested on 16 IBMQ quantum processors.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Abstract Compared with traditional computers, quantum computers can provide exponential acceleration for certain critical fields. However, the coupling of quantum systems with the environment, along with the intrinsic characteristics of quantum systems, has collectively introduced quantum noise, which has emerged as a significant impediment to the development of quantum computing. Quantum error mitigation (QEM) has been proposed as an alternative solution in the noisy intermediate-scale quantum era. In recent years, with the rise of artificial intelligence, machine learning-based QEM technology has received attention from the industry. However, the latest machine learning-based QEM techniques have limitations, especially their inability to mitigate errors in the quantum circuits whose number of qubits exceeds the number of qubits in the training set, and their tendency to amplify noise when constructing feature sets. This paper proposes QEMOS, a novel random forest-based machine learning model that utilizes a new feature dataset incorporating quantum computer backend properties, with feature dimensionality reduction enabling decoupling from the number of qubits. The model is trained and tested using six different simulators from Qiskit and a real quantum computer tianyan-176. It is worth noting that this model overcomes the limitation of sensitivity to the number of qubits, which was the main problem of previous methods. When trained on 5–9 qubit circuits, the model achieves a probability of correct mitigation of 86.38% on 2–13 qubit circuits, though this efficacy is observed primarily for circuits exhibiting high-probability outputs and decreases as all output probabilities approach zero. Compared to the baseline, the model demonstrates a 31.74% error reduction on test sets with more qubits than the training set. On real quantum computer, testing shows an average error reduction of 67.5%.