Efficiency enhancement up to unity in a generalized quantum Otto engine: Comparative analysis with conventional quantum Otto engine utilizing a two-qubit Heisenberg X X Z chain
This study presents a comparative analysis of three quantum thermal engines utilizing a two-qubit Heisenberg XXZ chain as the working substance. A novel generalized quantum Otto cycle (GQOC) is introduced, featuring two distinct coupling configurations to thermal reservoirs. The GQOC exhibits the potential for 100% efficiency, surpassing the efficiency of the conventional quantum Otto cycle. Essential conditions for positive work extraction and achieving maximum unity efficiency are derived. An experimental implementation using quantum electrodynamic circuits and Transmon qudit is proposed. This work contributes to the advancement of quantum heat engines, highlighting the benefits of nonequilibrium processes and asymmetric coupling for enhanced work extraction and efficiency.
This study presents a comparative analysis of three quantum thermal engines utilizing a two-qubit Heisenberg XXZ chain as the working substance. A novel generalized quantum Otto cycle (GQOC) is introduced, featuring two distinct coupling configurations to thermal reservoirs. The GQOC exhibits the potential for 100% efficiency, surpassing the efficiency of the conventional quantum Otto cycle. Essential conditions for positive work extraction and achieving maximum unity efficiency are derived. An experimental implementation using quantum electrodynamic circuits and Transmon qudit is proposed. This work contributes to the advancement of quantum heat engines, highlighting the benefits of nonequilibrium processes and asymmetric coupling for enhanced work extraction and efficiency.
In this work we investigate a finite-time quantum Otto-like heat engine with a single-qubit working substance, distinguished from the standard Otto cycle by introducing a unitary operation before the cold isochore. This operation suppresses the slowest decaying mode of the open-system dynamics and broadens the spectral gap, thereby inducing an exponential to accelerate the subsequent thermalization process toward stationarity. We derive analytic expressions for the work, heat, and efficiency, and perform numerical simulations comparing the standard Otto engine, the shortcut to adiabatic engine, and our proposed Otto-like engine. Our analysis demonstrates that with an appropriate parameter selection, the additional unitary operation can significantly boost the system's power and efficiency. Finally, using the unified optimization criterion Φ, we further show that the modified cycle consistently outperforms both the conventional cycle and the shortcut to adiabatic protocol.
Abstract This paper proposes a theoretical model for a heat engine operating on the Otto cycle, employing a two-qubit Heisenberg chain as its working substance. This system is subjected to an external, time-dependent homogeneous magnetic field and a symmetric cross-spin interaction. The interaction is configured to occur along two distinct orientations, contingent upon the direction of Zeeman energy and symmetric interaction: either exclusively along the X -direction or exclusively along the Z -direction. Furthermore, the thermal reservoirs integral to the Otto engine are considered to engage with the working substance via two discrete modes: a localized interaction or a collective interaction. The two qubits exhibit weak coupling to a non-equilibrium thermal environment during the isochoric heating and cooling strokes, thereby validating the application of a Markovian model as a suitable approximation for describing the time evolution of the working substance. This study investigates the influence of various system parameters on the thermodynamic quantities and the resultant power output. A principal finding is that refrigeration functionality is the predominant operational characteristic when the system engages in collective interaction with the reservoirs. Conversely, localized interactions facilitate dual operational modes, with the sign of the Zeeman energy determining the function as either a refrigerator or a heat engine. Significantly, positive power output is achieved in the engine regime, and we find that the choice of interaction axis acts as a powerful amplification mechanism for the thermodynamic output, while the system-environment coupling scheme proves to be the most decisive factor in determining the machine’s fundamental purpose.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
Quantum thermal machines make use of non-classical thermodynamic resources, one of which include interactions between elements of the quantum working medium. In this paper, we examine the performance of a quasi-static quantum Otto engine based on two spins of arbitrary magnitudes subject to an external magnetic field and coupled via an isotropic Heisenberg exchange interaction. It has been shown earlier that the said interaction provides an enhancement of cycle efficiency, with an upper bound that is tighter than the Carnot efficiency. However, the necessary conditions governing engine performance and the relevant upper bound for efficiency are unknown for the general case of arbitrary spin magnitudes. By analyzing extreme case scenarios, we formulate heuristics to infer the necessary conditions for an engine with uncoupled as well as coupled spin model. These conditions lead us to a connection between performance of quantum heat engines and the notion of majorization. Furthermore, the study of complete Otto cycles inherent in the average cycle also yields interesting insights into the average performance.
Abstract Recent theoretical and experimental studies in quantum heat engines show that, in the quasi-static regime, it is possible to have higher efficiency than the limit imposed by Carnot, provided that engineered reservoirs are used. The quasi-static regime, however, is a strong limitation to the operation of heat engines, since an infinitely long time is required to complete a cycle. In this paper we propose a two-level model as the working substance to perform a quantum Otto heat engine surrounded by a cold thermal reservoir and a squeezed hot thermal reservoir. Taking advantage of this model we show a striking achievement, that is to attain unity efficiency even at non-null power.
We study a quantum Otto heat engine whose working substance is an anisotropic two-qubit Heisenberg XYZ model. Independent local magnetic fields are used to control each spin individually. The influence of the longitudinal coupling, anisotropy, transverse coupling, and local fields on the net work output and efficiency is systematically examined. Reducing the longitudinal coupling is found to markedly improve both the maximum work and the peak efficiency. The engine performance reaches an optimum at a particular value of the anisotropy parameter. A local work analysis clarifies how work is produced during the cycle. Because of the asymmetric local fields and the intrinsic spin-spin interaction, the two qubits play markedly different thermodynamic roles; the interaction term itself contributes crucially to the total work. We further analyze the variation of quantum entanglement, quantified by concurrence, along the cycle. The results indicate that a pronounced change in entanglement between the hot and cold isomagnetic strokes is closely correlated with the efficiency enhancement. This work offers new insight into the operating principles and control of quantum Otto heat engines.