Quantum error correction (QEC) codes are necessary to fault-tolerantly operate quantum computers. However, every such code is inherently limited by its inability to detect logical errors. Here, we propose and implement a method that leverages dynamical decoupling (DD) to drastically suppress logical errors. The key to achieving this is to use the normalizer elements of the QEC code as DD pulses, which we refer to as normalizer dynamical decoupling (NDD). The resulting hybrid QEC-NDD strategy is in principle capable of handling arbitrary weight errors. We test an error detecting version of this strategy using IBM transmon devices and the [[4, 2, 2]] code, demonstrating performance that significantly exceeds the capabilities of using either this code or DD in isolation. We present a method that allows for the detection of logical errors affecting logically encoded Bell states, which, in this case, arise primarily from crosstalk among physical qubits. Building on this, we experimentally demonstrate high-fidelity entangled logical qubits. The fidelities we achieve are beyond-breakeven, i.e., they significantly exceed the corresponding fidelities of unprotected entangled qubits in the same setting. Quantum error correction codes are hindered by the inability to detect logical errors. Here the authors demonstrate a method that integrates quantum error correction with logical level dynamical decoupling to suppress these errors and achieve high fidelity entangled logical qubits.
Quantum error correction (QEC) codes are necessary to fault-tolerantly operate quantum computers. However, every such code is inherently limited by its inability to detect logical errors. Here, we propose and implement a method that leverages dynamical decoupling (DD) to drastically suppress logical errors. The key to achieving this is to use the normalizer elements of the QEC code as DD pulses, which we refer to as normalizer dynamical decoupling (NDD). The resulting hybrid QEC-NDD strategy is in principle capable of handling arbitrary weight errors. We test an error detecting version of this strategy using IBM transmon devices and the [[4, 2, 2]] code, demonstrating performance that significantly exceeds the capabilities of using either this code or DD in isolation. We present a method that allows for the detection of logical errors affecting logically encoded Bell states, which, in this case, arise primarily from crosstalk among physical qubits. Building on this, we experimentally demonstrate high-fidelity entangled logical qubits. The fidelities we achieve are beyond-breakeven, i.e., they significantly exceed the corresponding fidelities of unprotected entangled qubits in the same setting. Quantum error correction codes are hindered by the inability to detect logical errors. Here the authors demonstrate a method that integrates quantum error correction with logical level dynamical decoupling to suppress these errors and achieve high fidelity entangled logical qubits.
Quantum error correction/detection (QEC/QED) and dynamical decoupling (DD) are tools for protecting quantum information. A natural goal is to combine them to outperform either approach alone. Such a benefit is not automatic: physical DD can conflict with encoded subspace, and QEC performance is governed by the errors that survive decoding, not just those DD suppresses. We analyze a hybrid memory cycle where DD is implemented logically (LDD) using normalizer elements of an [[n,k,d]] stabilizer code, followed by a round of syndrome measurement and recovery (or, in the detection setting, postselection on a trivial syndrome). In an effective Pauli model with physical error probability p, LDD suppression factor pDD, and recovery imperfection rate pQEC (or pQED), we derive closed-form entanglement-fidelity expressions for QEC-only, QED-only, LDD-only, physical DD, and the hybrid LDD+QEC protocol. The formulas are expressed via a small set of code-dependent weight enumerator polynomials, making the role of the decoder and the LDD group explicit. For ideal recovery LDD+QEC outperforms QEC-only iff the conditional fraction of uncorrectable Pauli errors is larger in the LDD-suppressed sector than in the unsuppressed sector. In the low-noise regime, a sufficient design rule guaranteeing hybrid advantage is that LDD suppresses at least one minimum-weight uncorrectable Pauli error for the chosen recovery map. We show how stabilizer-equivalent choices of LDD generators can enforce this condition. We supplement our analysis with numerical results for the [[7,1,3]] Steane code and a [[13,1,3]] code, mapping regions of hybrid-protocol advantage in parameter space beyond the small-p regime. Our work illustrates the need for co-design of the code, decoder, and logical decoupling group, and clarifies the conditions under which the hybrid LDD+QEC protocol is advantageous.
High-rate quantum error correcting (QEC) codes encode many logical qubits in a given number of physical qubits, making them promising candidates for quantum computation. Implementing high-rate codes at a scale that both frustrates classical computing and improves performance by encoding requires both high fidelity gates and long-range qubit connectivity -- both of which are offered by trapped-ion quantum computers. Here, we demonstrate computations that outperform their unencoded counterparts in the high-rate [[k+2,k,2]] iceberg quantum error detecting (QED) and [[(k2+2)(k1+2),k2k1,4]] two-level concatenated iceberg QEC codes, using the 98-qubit Quantinuum Helios trapped-ion quantum processor. Utilizing new gadgets for encoded operations, we realize this "beyond break-even" performance with reasonable postselection rates across a range of fault-tolerant (FT) and partially-fault-tolerant (pFT) component and application benchmarks with between 48 and 94 logical qubits. These benchmarks include FT state preparation and measurement, QEC cycle benchmarking, logical gate benchmarking, GHZ state preparation, and a pFT quantum simulation of the three-dimensional XY model of quantum magnetism. Additionally, we illustrate that postselection rates can be suppressed by increasing the code distance via concatenation. Our results represent state-of-the-art logical component and state fidelities and provide evidence that high-rate QED/QEC codes are viable on contemporary quantum computers for near-term beyond-classical-scale computation.
The promise of quantum computing is closer to reality today than ever before, thanks to rapid progress in the development of quantum hardware. Even as qubit lifetimes and gate fidelities continue to improve, realizing robust, fault-tolerant quantum computers is contingent upon the successful implementation of quantum error correction (QEC). Conventional QEC schemes have rather high resource overheads and low threshold requirements, making them challenging to implement on present day hardware. Here, we use a recently developed noise-adapted 3-qubit QEC scheme to demonstrate break-even performance against native amplitude-damping (AD) noise on IBM quantum hardware. We use variational quantum circuits to construct hardware-efficient encoding and decoding circuits. This scheme is probabilistic due to the non-unitary nature of the recovery operators, which are implemented via the block-encoding technique. We demonstrate logical qubit lifetimes exceeding those of the physical qubits by performing multiple rounds of QEC. To further protect the qubits from dephasing due to crosstalk, we incorporate dynamical decoupling into our noise-adapted QEC scheme in a seamless fashion. To account for the post-selection overhead, we define a measure of gain, that allows for faithful performance benchmarking of the protocol. Our analysis suggests that the performance of our protocol is limited primarily by the measurement readout fidelity, and is bound to improve with successive generations of quantum processors.
Quantum computers must be able to function in the presence of decoherence. The simplest strategy for decoherence reduction is dynamical decoupling (DD), which requires no encoding overhead and works by converting quantum gates into decoupling pulses. Here, using the IBM and Rigetti platforms, we demonstrate that the DD method is suitable for implementation in today's relatively noisy and small-scale cloud-based quantum computers. Using DD, we achieve substantial fidelity gains relative to unprotected, free evolution of individual superconducting transmon qubits. To a lesser degree, DD is also capable of protecting entangled two-qubit states. We show that dephasing and spontaneous emission errors are dominant in these systems, and that different DD sequences are capable of mitigating both effects. Unlike previous work demonstrating the use of quantum error correcting codes on the same platforms, we make no use of postselection and hence report unconditional fidelity improvements against natural decoherence.
Quantum error correction (QEC) protects quantum systems against inevitable noises and control inaccuracies, providing a pathway toward fault-tolerant (FT) quantum computation. Stabilizer codes, including surface code and color code, have long been the focus of research and have seen significant experimental progress in recent years. Recently proposed time-dynamical QEC, including Floquet codes and generalized time-dynamical code implementations, opens up new opportunities for FT quantum computation. By employing a periodic schedule of low-weight parity checks, Floquet codes can generate additional dynamical logical qubits, offering enhanced error correction capabilities and, potentially, higher code performance. Here, we experimentally implement the Floquet-Bacon-Shor code on a superconducting quantum processor. We encode a dynamical logical qubit within a 3×3 lattice of data qubits alongside a conventional static logical qubit. We demonstrate FT encoding and measurement of the two-qubit logical states and stabilize these states using repeated error detection. We showcase universal single-qubit logical gates on the dynamical qubit. Furthermore, by implementing a logical controlled-not (cnot) gate, we entangle the dynamical and static logical qubits, generating an error-detected logical Bell state with a fidelity of 75.9%. Our results highlight the potential of Floquet codes for resource-efficient FT quantum computation.
Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.