Quantum error correction (QEC) protects quantum systems against inevitable noises and control inaccuracies, providing a pathway toward fault-tolerant (FT) quantum computation. Stabilizer codes, including surface code and color code, have long been the focus of research and have seen significant experimental progress in recent years. Recently proposed time-dynamical QEC, including Floquet codes and generalized time-dynamical code implementations, opens up new opportunities for FT quantum computation. By employing a periodic schedule of low-weight parity checks, Floquet codes can generate additional dynamical logical qubits, offering enhanced error correction capabilities and, potentially, higher code performance. Here, we experimentally implement the Floquet-Bacon-Shor code on a superconducting quantum processor. We encode a dynamical logical qubit within a 3×3 lattice of data qubits alongside a conventional static logical qubit. We demonstrate FT encoding and measurement of the two-qubit logical states and stabilize these states using repeated error detection. We showcase universal single-qubit logical gates on the dynamical qubit. Furthermore, by implementing a logical controlled-not (cnot) gate, we entangle the dynamical and static logical qubits, generating an error-detected logical Bell state with a fidelity of 75.9%. Our results highlight the potential of Floquet codes for resource-efficient FT quantum computation.
Quantum error correction (QEC) protects quantum systems against inevitable noises and control inaccuracies, providing a pathway toward fault-tolerant (FT) quantum computation. Stabilizer codes, including surface code and color code, have long been the focus of research and have seen significant experimental progress in recent years. Recently proposed time-dynamical QEC, including Floquet codes and generalized time-dynamical code implementations, opens up new opportunities for FT quantum computation. By employing a periodic schedule of low-weight parity checks, Floquet codes can generate additional dynamical logical qubits, offering enhanced error correction capabilities and, potentially, higher code performance. Here, we experimentally implement the Floquet-Bacon-Shor code on a superconducting quantum processor. We encode a dynamical logical qubit within a 3×3 lattice of data qubits alongside a conventional static logical qubit. We demonstrate FT encoding and measurement of the two-qubit logical states and stabilize these states using repeated error detection. We showcase universal single-qubit logical gates on the dynamical qubit. Furthermore, by implementing a logical controlled-not (cnot) gate, we entangle the dynamical and static logical qubits, generating an error-detected logical Bell state with a fidelity of 75.9%. Our results highlight the potential of Floquet codes for resource-efficient FT quantum computation.
The Bacon-Shor code is a quantum error correcting subsystem code composed of weight 2 check operators that admits a single logical qubit, and has distance d on a d×d square lattice. We show that when viewed as a Floquet code, by choosing an appropriate measurement schedule of the check operators, it can additionally host several dynamical logical qubits. Specifically, we identify a period 4 measurement schedule of the check operators that preserves logical information between the instantaneous stabilizer groups. Such a schedule measures not only the usual stabilizers of the Bacon-Shor code, but also additional stabilizers that protect the dynamical logical qubits against errors. We show that the code distance of these Floquet-Bacon-Shor codes scales as Θ(d/k) on an n=d×d lattice with k dynamical logical qubits, along with the logical qubit of the parent subsystem code. Unlike the usual Bacon-Shor code, the Floquet-Bacon-Shor code family introduced here can therefore saturate the subsystem bound kd=O(n). Moreover, several errors are shown to be self-corrected purely by the measurement schedule itself. This work provides insights into the design space for dynamical codes and expands the known approaches for constructing Floquet codes.
Quantum error correction protects fragile quantum information by encoding it into a larger quantum system. These extra degrees of freedom enable the detection and correction of errors, but also increase the operational complexity of the encoded logical qubit. Fault-tolerant circuits contain the spread of errors while operating the logical qubit, and are essential for realizing error suppression in practice. While fault-tolerant design works in principle, it has not previously been demonstrated in an error-corrected physical system with native noise characteristics. In this work, we experimentally demonstrate fault-tolerant preparation, measurement, rotation, and stabilizer measurement of a Bacon-Shor logical qubit using 13 trapped ion qubits. When we compare these fault-tolerant protocols to non-fault tolerant protocols, we see significant reductions in the error rates of the logical primitives in the presence of noise. The result of fault-tolerant design is an average state preparation and measurement error of 0.6% and a Clifford gate error of 0.3% after error correction. Additionally, we prepare magic states with fidelities exceeding the distillation threshold, demonstrating all of the key single-qubit ingredients required for universal fault-tolerant operation. These results demonstrate that fault-tolerant circuits enable highly accurate logical primitives in current quantum systems. With improved two-qubit gates and the use of intermediate measurements, a stabilized logical qubit can be achieved.
A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has enabled different codes and implementations that do not rely on static syndrome measurements. Here we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a distinct solution to hardware design challenges faced by surface code realizations. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of Λ35,hex = 2.15(2), Λ35,walk = 1.69(6) and Λ35,iSWAP = 1.56(2), achieving state-of-the-art error suppression for each. Our work demonstrates that dynamic circuit approaches meet the demands for fault tolerance and enable alternative strategies for scalable hardware design. Typical quantum error correcting codes assign fixed roles to the underlying physical qubits. Now the performance benefits of alternative, dynamic error correction schemes have been demonstrated on a superconducting quantum processor.
A central goal in quantum error correction is to reduce the overhead of fault-tolerant quantum computing by increasing noise thresholds and reducing the number of physical qubits required to sustain a logical qubit. We introduce a potential path towards this goal based on a family of dynamically generated quantum error correcting codes that we call "hyperbolic Floquet codes.'' These codes are defined by a specific sequence of non-commuting two-body measurements arranged periodically in time that stabilize a topological code on a hyperbolic manifold with negative curvature. We focus on a family of lattices for n qubits that, according to our prescription that defines the code, provably achieve a finite encoding rate ( 1 / 8 + 2 / n ) while still requiring only two-body measurements. Similar to hyperbolic surface codes, the distance of the code at each time-step scales at most logarithmically in n . The family of lattices we choose indicates that this scaling is achievable in practice. We develop and benchmark an efficient matching-based decoder that provides evidence of a threshold near 0.1% in a phenomenological noise model and 0.25% in an entangling measurements noise model. Utilizing weight-two check operators and a qubit connectivity of 3, one of our hyperbolic Floquet codes uses 400 physical qubits to encode 52 logical qubits with a code distance of 8, i.e., it is a [ [ 400 , 52 , 8 ] ] code. At small error rates, comparable logical error suppression to this code requires 5x as many physical qubits (1924) when using the honeycomb Floquet code with the same noise model and decoder.
Abstract Future fault-tolerant quantum computers will require storing and processing quantum data in logical qubits. We realize a suite of logical operations on a distance-two logical qubit stabilized using repeated error detection cycles. Logical operations include initialization into arbitrary states, measurement in the cardinal bases of the Bloch sphere, and a universal set of single-qubit gates. For each type of operation, we observe higher performance for fault-tolerant variants over non-fault-tolerant variants, and quantify the difference through detailed characterization. In particular, we demonstrate process tomography of logical gates, using the notion of a logical Pauli transfer matrix. This integration of high-fidelity logical operations with a scalable scheme for repeated stabilization is a milestone on the road to quantum error correction with higher-distance superconducting surface codes.
A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has uncovered new codes and new code implementations. In this work, we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a unique solution to hardware design challenges and introducing flexibility in surface code realization. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of Λ35,hex=2.15(2), Λ35,walk=1.69(6), and Λ35,iSWAP=1.56(2), achieving state-of-the-art error suppression for each. With detailed error budgeting, we explore their performance trade-offs and implications for hardware design. This work demonstrates that dynamic circuit approaches satisfy the demands for fault-tolerance and opens new alternative avenues for scalable hardware design.