Variational quantum algorithms (VQAs) offer a promising approach to solving computationally demanding problems by combining parameterized quantum circuits with classical optimization. Estimating probabilistic outcomes on quantum hardware requires repeated measurements (shots). However, in practice, the limited shot budget introduces significant noise in the evaluation of the objective function. Gradient estimation in VQAs often relies on the finite-difference, which evaluates the noisy objective function at perturbed circuit parameter values. The accuracy of this estimation is highly dependent on the choice of step size for these perturbations. An inappropriate step size can exacerbate the impact of noise, causing inaccurate gradient estimates and hindering the classical optimization in VQAs. This paper proposes QuGStep, an algorithm that addresses the challenge of determining the appropriate step size for finite-difference gradient estimation under a shot budget. QuGStep is grounded in a theorem that proves the optimal step size, which accounts for the shot budget, minimizes the error bound in gradient estimation using finite differences. Numerical experiments approximating the ground state energy of several molecules demonstrate that QuGStep can identify the appropriate step size for the given shot budget to obtain effective gradient estimation. Notably, the step size identified by QuGStep achieved convergence to the ground state energy with over 94% fewer shots compared to using a default step size (i.e., step size of 0.01). These findings highlight the potential of QuGStep to improve the practical deployment and scalability of quantum computing technologies.
Variational quantum algorithms (VQAs) offer a promising approach to solving computationally demanding problems by combining parameterized quantum circuits with classical optimization. Estimating probabilistic outcomes on quantum hardware requires repeated measurements (shots). However, in practice, the limited shot budget introduces significant noise in the evaluation of the objective function. Gradient estimation in VQAs often relies on the finite-difference, which evaluates the noisy objective function at perturbed circuit parameter values. The accuracy of this estimation is highly dependent on the choice of step size for these perturbations. An inappropriate step size can exacerbate the impact of noise, causing inaccurate gradient estimates and hindering the classical optimization in VQAs. This paper proposes QuGStep, an algorithm that addresses the challenge of determining the appropriate step size for finite-difference gradient estimation under a shot budget. QuGStep is grounded in a theorem that proves the optimal step size, which accounts for the shot budget, minimizes the error bound in gradient estimation using finite differences. Numerical experiments approximating the ground state energy of several molecules demonstrate that QuGStep can identify the appropriate step size for the given shot budget to obtain effective gradient estimation. Notably, the step size identified by QuGStep achieved convergence to the ground state energy with over 94% fewer shots compared to using a default step size (i.e., step size of 0.01). These findings highlight the potential of QuGStep to improve the practical deployment and scalability of quantum computing technologies.
The exponential runtime of quantum simulators on classical machines, along with long queue times and high costs associated with real quantum devices, presents significant challenges for the efficient optimization of Variational Quantum Algorithms (VQAs) such as the Variational Quantum Eigensolver (VQE), Quantum Approximate Optimization Algorithm (QAOA), and Quantum Neural Networks (QNNs). To address these limitations, we propose a novel approach, DyPP (Dynamic Parameter Prediction), which accelerates the convergence of VQAs by leveraging regular trends in the parameter weights to update parameters efficiently. We introduce two techniques for optimal prediction performance: Naive Prediction (NaP) and Adaptive Prediction (AdaP). Through extensive experimentation and training of multiple QNN models on various datasets, we demonstrate that DyPP achieves a speedup of approximately 2.25×compared to standard training methods, while also providing improved accuracy (up to 2.3% higher) and lower loss (up to 6.1% reduction) with minimal storage and computational overhead. We further evaluate DyPP’s effectiveness in VQE for molecular ground-state energy estimation and in QAOA for graph MaxCut. Our results show that, on average, DyPP leads to a speedup of up to 3.1× for VQE and 2.91× for QAOA compared to traditional optimization, while requiring up to 3.3× fewer shots (i.e., repeated circuit executions). Even in the presence of hardware noise, DyPP outperforms existing optimization techniques, delivering up to 3.33× speedup and requiring 2.5× fewer shots, thereby enhancing the efficiency of VQAs.
Variational quantum algorithms (VQAs) offer the most promising path to obtaining quantum advantages via noisy intermediate-scale quantum (NISQ) processors. Such systems leverage classical optimization to tune the parameters of a parameterized quantum circuit (PQC). The goal is minimizing a cost function that depends on measurement outputs obtained from the PQC. Optimization is typically implemented via stochastic gradient descent (SGD). On NISQ computers, gate noise due to imperfections and decoherence affects the stochastic gradient estimates by introducing a bias. Quantum error mitigation (QEM) techniques can reduce the estimation bias without requiring any increase in the number of qubits, but they in turn cause an increase in the variance of the gradient estimates. This work studies the impact of quantum gate noise on the convergence of SGD for the variational eigensolver (VQE), a fundamental instance of VQAs. The main goal is ascertaining conditions under which QEM can enhance the performance of SGD for VQEs. It is shown that quantum gate noise induces a nonzero error-floor on the convergence error of SGD (evaluated with respect to a reference noiseless PQC), which depends on the number of noisy gates, the strength of the noise, as well as the eigenspectrum of the observable being measured and minimized. In contrast, with QEM, any arbitrarily small error can be obtained. Furthermore, for error levels attainable with or without QEM, QEM can reduce the number of required iterations, but only as long as the quantum noise level is sufficiently large, and a sufficiently large number of measurements is allowed at each SGD iteration. Numerical examples for a max-cut problem corroborate the main theoretical findings.
Variational quantum algorithms (VQAs) are promising methods that leverage noisy quantum computers and classical computing techniques for practical applications. In VQAs, the classical optimizers such as gradient-based optimizers are utilized to adjust the parameters of the quantum circuit so that the objective function is minimized. However, they often suffer from the so-called vanishing gradient or barren plateau issue. On the other hand, the normalized gradient descent (NGD) method, which employs the normalized gradient vector to update the parameters, has been successfully utilized in several optimization problems. Here, we study the performance of the NGD methods in the optimization of VQAs for the first time. Our goal is two-fold. The first is to examine the effectiveness of NGD and its variants for overcoming the vanishing gradient problems. The second is to propose a new NGD that can attain the faster convergence than the ordinary NGD. We performed numerical simulations of these gradient-based optimizers in the context of quantum chemistry where VQAs are used to find the ground state of a given Hamiltonian. The results show the effective convergence property of the NGD methods in VQAs, compared to the relevant optimizers without normalization. Moreover, we make use of some normalized gradient vectors at the past iteration steps to propose the novel historical NGD that has a theoretical guarantee to accelerate the convergence speed, which is observed in the numerical experiments as well.
Sampling noisy intermediate-scale quantum devices is a fundamental step that converts coherent quantum-circuit outputs to measurement data for running variational quantum algorithms that utilize gradient and Hessian methods in cost-function optimization tasks. This step, however, introduces estimation errors in the resulting gradient or Hessian computations. To minimize these errors, we discuss tunable numerical estimators, which are the finite difference (including their generalized versions) and scaled parameter-shift estimators [introduced in Phys. Rev. A 103, 012405 (2021)], and propose operational circuit-averaged methods to optimize them. We show that these optimized numerical estimators offer estimation errors that drop exponentially with the number of circuit qubits for a given sampling-copy number, revealing a direct compatibility with the barren-plateau phenomenon. In particular, there exists a critical sampling-copy number below which an optimized difference estimator gives a smaller average estimation error in contrast to the standard (analytical) parameter-shift estimator, which exactly computes gradient and Hessian components. Moreover, this critical number grows exponentially with the circuit-qubit number. Finally, by forsaking analyticity, we demonstrate that the scaled parameter-shift estimators beat the standard unscaled ones in estimation accuracy under any situation, with comparable performances to those of the difference estimators within significant copy-number ranges, and are the best ones if larger copy numbers are affordable.
Many optimization methods for training variational quantum algorithms are based on estimating gradients of the cost function. Due to the statistical nature of quantum measurements, this estimation requires many circuit evaluations, which is a crucial bottleneck of the whole approach. We propose a new gradient estimation method to mitigate this measurement challenge and reduce the required measurement rounds. Within a Bayesian framework and based on the generalized parameter shift rule, we use prior information about the circuit to find an estimation strategy that minimizes expected statistical and systematic errors simultaneously. We demonstrate that this approach can significantly outperform traditional gradient estimation methods, reducing the required measurement rounds by up to an order of magnitude for a common QAOA setup. Our analysis also shows that an estimation via finite differences can outperform the parameter shift rule in terms of gradient accuracy for small and moderate measurement budgets.
Quantum computing has become a potential way to solve complex problems that conventional computers can’t handle, especially those involving strongly correlated quantum systems. Classical simulation of these systems becomes exponentially more challenging as the number of interacting particles rises, resulting in significant computational and memory limitations. As a result, classical computational approaches are unable to handle many significant physical and chemical systems, including molecular structures, biological molecules, and quantum materials. Quantum computers operate using the same quantum mechanical principles as these systems. Consequently, they provide a natural framework for exploring large Hilbert spaces and capturing complex quantum correlations. This thesis begins by discussing the fundamental principles of quantum mechanics that are applicable to computation, such as qubits, superposition, and entanglement. The construction of quantum circuits is discussed after a discussion of basic quantum gates and their matrix representations. These ideas are the foundation of quantum algorithms and offer the essential framework for comprehending the modeling and manipulation of complicated quantum states using quantum hardware. Building on this foundation, the thesis focuses on Variational Quantum Algorithms (VQAs), which offer a feasible hybrid quantum-classical approach to optimizing near-term quantum devices. In VQAs, a parameterized quantum circuit is used to approximate the ground-state energy of the quantum system. A classical optimizer then iteratively updates the variational parameters to minimize a cost function, usually the expectation value of the system’s Hamiltonian. A thorough analysis of the function of gradient-based optimization is conducted, encompassing the parameter-shift rule that is employed to calculate precise energy derivatives. The discussion is expanded to include major applications such as the Quantum Approximate Optimization Algorithm and developing approaches to quantum machine learning, emphasizing the importance of efficient and accurate gradient evaluation. A major challenge in the real-world application of VQAs is the high resource cost of gradient estimation using conventional direct measurement techniques. These techniques require repeated projective measurements and several executions of parameter-shifted quantum circuits, which lead to significant measurement overhead and deeper circuits. Quantum Non-Demolition Measurement (QNDM) is examined in this thesis as a potential framework for gradient evaluation to get around this limitation. Based on recent theoretical advances, QNDM introduces an ancillary detector qubit that coherently stores gradient information within its phase. Derivatives can then be estimated indirectly through detector measurements. This allows gradient information to be extracted without destroying the quantum state and with a greatly reduced number of measurements. The efficiency of QNDM is evaluated by extending the study to systems with bigger Hamiltonians and greater molecular complexity, as well as by comparing it in detail with direct measurement techniques utilizing benchmark molecular systems like LiH, Li2, and H2. Although both methods successfully converge to the ground-state energy, as shown by numerical results, QNDM consistently uses fewer quantum resources in terms of logical gate operations, measurement shots, and circuit executions. Additionally, as system size grows, QNDM’s resource advantage becomes more noticeable, suggesting that it has favorable scalability for bigger molecular systems. This thesis concludes that, while both direct measurement and quantum non-demolition measurement approaches allow for precise variational optimization, QNDM gives a significant decrease in quantum resources. These results establish QNDM as an effective and scalable method for developing quantum simulations of realistic physical and chemical systems and for executing variational quantum algorithms on near-term quantum hardware.