Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.13225 · Physical Review Letters

Optimizing the Frequency Positioning of Tunable Couplers in a Circuit QED Processor to Mitigate Spectator Effects on Quantum Operations

S. Vallés-Sanclemente, T. H. F. Vroomans, Timo R. van Abswoude, Thijs Stavenga, F. Brulleman, S. L. M. van der Meer, Y. Xin, A. Lawrence, Vibhor Singh, Michiel Adriaan Rol, L. DiCarlo

Published Apr 2, 2026• 2 citations
arXivHTMLPDF

Abstract

We experimentally optimize the frequency of flux-tunable couplers in a superconducting quantum processor to minimize the impact of spectator transmons during quantum operations (single-qubit gates, two-qubit gates, and readout) on other transmons. We adapt a popular transmonlike tunable-coupling element, achieving high-fidelity, low-leakage controlled-Z gates with unipolar, fast-adiabatic pulsing only on the coupler. We demonstrate the ability of the tunable coupler to null residual-ZZ coupling as well as exchange couplings in the one- and two-excitation manifolds. However, the nulling of these coherent interactions is not simultaneous, prompting the exploration of trade-offs. We present experiments pinpointing spectator effects on specific quantum operations. We also study the combined effect on the three types of operations using repeated quantum parity measurements.

DOI
10.1103/wdfj-4nbt

Related papers

Experimental Realization of a C-Shunt Flux-Qubit Coupler for Controlled-Z Gates between Transmons

Weiping Yuan, Silu Zhao, Li Li +16 more

Fast entangling gates and low-interaction idling require distinct operating conditions in superconducting quantum processors. We experimentally realize a transmon-C-shunt-transmon (TCT) device in which a flux-tunable, three-junction capacitively shunted flux-qubit coupler connects two transmon data qubits. The C-shunt coupler provides a flux-tunable, positively anharmonic spectrum for tailoring the interactions between the data qubits. Conditional Ramsey and swap measurements identify an idle region with near-zero residual ZZ interaction strength and suppressed transverse exchange. At this bias, simultaneous single-qubit interleaved randomized benchmarking yields X-gate fldelities above 99.7%, consistent with individual operation. A 45 ns nonadiabatic controlled-Z (CZ) gate achieves an interleaved randomized benchmarking fldelity estimate of 99.23(15)%. Numerical simulations identify coupler energy relaxation as an important limitation on CZ-gate fldelity and indicate that extending the coupler lifetime can improve gate performance. These results demonstrate the experimental feasibility of C-shunt flux-qubit couplers for combining low-interaction idling with fast entangling operations between transmon qubits.

quant-pharXiv:2610.18477•Oct 14, 2026•0 citations

Crosstalk in Multi-Qubit Fluxonium Architectures with Transmon Couplers

Martijn F. S. Zwanenburg, Christian Kraglund Andersen

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below $10^{-4}$ by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

quant-pharXiv:2603.09870•Mar 11, 2026•0 citations

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•116 citations

Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers

Peng Xu, Yunlong Wang, Yuechen Mu +4 more

Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within $25 \mathrm{ns}$, with an average gate fidelity exceeding $99.99\%$ and leakage below $10^{-5}$. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately $99.9\%$. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below $10^{-4}$ in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.

quant-pharXiv:2609.14197•Sep 15, 2026•0 citations

Impact of Spectators on a Two-Qubit Gate in a Tunable Coupling Superconducting Circuit

Tianqi Cai, Xiyue Han, Yukai Wu +7 more

Cross-resonance (CR) gates have emerged as a promising scheme for fault-tolerant quantum computation with fixed-frequency qubits. We experimentally implement an entangling CR gate by using a microwave-only control in a tunable coupling superconducting circuit, where the tunable coupler provides extra degrees of freedom to verify optimal conditions for constructing a CR gate. By developing a three-qubit Hamiltonian tomography protocol, we systematically investigate the dependency of gate fidelities on spurious qubit interactions and present the first experimental approach to the evaluation of the perturbation impact arising from spectator qubits. Our results reveal that the spectator qubits lead to reductions in CR gate fidelity dependent on ZZ interactions and particular frequency detunings between spectator and gate qubits. The target spectator demonstrates a more serious impact than the control spectator under a standard echo pulse scheme, whereas the degradation of gate fidelity is observed up to 22.5% as both the spectators are present with a modest ZZ coupling to the computational qubits. Our experiments uncover an optimal CR operation regime, and the method we develop here can readily be applied to improving other kinds of two-qubit gates in large-scale quantum circuits.

arXiv:2101.01854•Physical Review Letters•Aug 5, 2021•32 citations

Unlocking a fast adiabatic CZ gate and exact residual $ZZ$ cancellation between fixed-frequency transmons using a floating tunable coupler

Angela Q. Chen, Xian Wu, Sarah Strong +1 more

Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling $ZZ=0$ condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual $ZZ$ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.

quant-pharXiv:2604.05048•Apr 8, 2026•0 citations
We experimentally optimize the frequency of flux-tunable couplers in a superconducting quantum processor to minimize the impact of spectator transmons during quantum operations (single-qubit gates, two-qubit gates, and readout) on other transmons. We adapt a popular transmonlike tunable-coupling element, achieving high-fidelity, low-leakage controlled-Z gates with unipolar, fast-adiabatic pulsing only on the coupler. We demonstrate the ability of the tunable coupler to null residual-ZZ coupling as well as exchange couplings in the one- and two-excitation manifolds. However, the nulling of these coherent interactions is not simultaneous, prompting the exploration of trade-offs. We present experiments pinpointing spectator effects on specific quantum operations. We also study the combined effect on the three types of operations using repeated quantum parity measurements.
Fast entangling gates and low-interaction idling require distinct operating conditions in superconducting quantum processors. We experimentally realize a transmon-C-shunt-transmon (TCT) device in which a flux-tunable, three-junction capacitively shunted flux-qubit coupler connects two transmon data qubits. The C-shunt coupler provides a flux-tunable, positively anharmonic spectrum for tailoring the interactions between the data qubits. Conditional Ramsey and swap measurements identify an idle region with near-zero residual ZZ interaction strength and suppressed transverse exchange. At this bias, simultaneous single-qubit interleaved randomized benchmarking yields X-gate fldelities above 99.7%, consistent with individual operation. A 45 ns nonadiabatic controlled-Z (CZ) gate achieves an interleaved randomized benchmarking fldelity estimate of 99.23(15)%. Numerical simulations identify coupler energy relaxation as an important limitation on CZ-gate fldelity and indicate that extending the coupler lifetime can improve gate performance. These results demonstrate the experimental feasibility of C-shunt flux-qubit couplers for combining low-interaction idling with fast entangling operations between transmon qubits.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10−410^{-4}10−4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within 25ns25 \mathrm{ns}25ns, with an average gate fidelity exceeding 99.99%99.99\%99.99% and leakage below 10−510^{-5}10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately 99.9%99.9\%99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below 10−410^{-4}10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
Cross-resonance (CR) gates have emerged as a promising scheme for fault-tolerant quantum computation with fixed-frequency qubits. We experimentally implement an entangling CR gate by using a microwave-only control in a tunable coupling superconducting circuit, where the tunable coupler provides extra degrees of freedom to verify optimal conditions for constructing a CR gate. By developing a three-qubit Hamiltonian tomography protocol, we systematically investigate the dependency of gate fidelities on spurious qubit interactions and present the first experimental approach to the evaluation of the perturbation impact arising from spectator qubits. Our results reveal that the spectator qubits lead to reductions in CR gate fidelity dependent on ZZ interactions and particular frequency detunings between spectator and gate qubits. The target spectator demonstrates a more serious impact than the control spectator under a standard echo pulse scheme, whereas the degradation of gate fidelity is observed up to 22.5% as both the spectators are present with a modest ZZ coupling to the computational qubits. Our experiments uncover an optimal CR operation regime, and the method we develop here can readily be applied to improving other kinds of two-qubit gates in large-scale quantum circuits.
Unlocking a fast adiabatic CZ gate and exact residual ZZZZZZ cancellation between fixed-frequency transmons using a floating tunable coupler
Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling ZZ=0ZZ=0ZZ=0 condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual ZZZZZZ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.