Trapped-ion technology is a leading approach for scalable quantum computing. A key element of ion trapping is reliable loading of atomic sources into the trap. While thermal atomic ovens have traditionally been used for this purpose, laser ablation has emerged as a viable alternative in recent years, offering the advantages of faster and more localized loading with lower heat dissipation. Calcium is a well-established ion for qubit applications. Here we examine a range of calcium sources for ablation and provide a comprehensive analysis of each. We consider factors such as ease of use, temperature and yield of the ablation plume, and the lifetime of ablation spots. For each target, we estimate the number of trappable atoms per ablation pulse for a typical surface and 3D ion trap.
The
133Ba+ ion is a promising candidate as a high-fidelity qubit, and the
137Ba+ isotope is promising as a high-fidelity qudit
(d>2). Barium metal is very reactive, and
133Ba+ is radioactive and can only be sourced in small quantities, so the most commonly used loading method, oven heating, is less suited for barium and is currently not possible for
133Ba+. Pulsed laser ablation solves both of these problems by utilizing compound barium sources while also giving some distinct advantages, such as fast loading, less displaced material, and lower heat load near the ion trap. Because of the relatively low abundances of the isotopes of interest, a two-step photoionization technique is used, which gives us the ability to selectively load isotopes. Characterization of the ablation process for our
BaCl2 targets are presented, including observation of neutral and ion ablation-fluence regimes, preparation and conditioning, lifetimes of ablation spots, and plume velocity distributions. We show that by using laser ablation on
BaCl2 salt targets with a two-step photoionization method, we can produce and trap barium ions reliably. Furthermore, we demonstrate that with our photoionization method, we can trap
137Ba+ with an enhanced selectivity compared to its natural abundance.
In this paper, we present a detailed method for rapidly and effectively loading a single 40 Ca + ion into a miniature linear Paul trap. Calcium atoms are generated by laser ablation, and the single ion is loaded and specific isotopes are selected by a two-step photo-ionization method. Compared to the traditional photo-ionization method in which atoms are typically emitted from a resistively heated oven, the advantages of laser ablation are that it can be precisely controlled, it can effectively avoid the problem of fluxed calcium deposition on the trap electrodes, and it restricts the generation of dark ions, which can influence atomic-precision spectroscopy measurements. With its short loading time, it is possible to load an ion in few seconds with the appropriate parameters. The technique of laser ablation has been applied to generate several species of atoms and ions at present, it will potentially benefit in the studies of optical frequency standards, quantum simulation and quantum information processing in an ultra-high vacuum condition and cryogenic system.
We demonstrate loading of
88Sr+ ions by laser ablation into a mm-scale surface-electrode ion trap. The laser used for ablation is a pulsed, frequency-tripled Nd:YAG with pulse energies of
1−−10mJ and durations of
4ns. An additional laser is not required to photoionize the ablated material. The efficiency and lifetime of several candidate materials for the laser ablation target are characterized by measuring the trapped ion fluorescence signal for a number of consecutive loads. Additionally, laser ablation is used to load traps with a trap depth
(40meV) below where electron impact ionization loading is typically successful $(\ensuremath{\gtrsim}500\phantom{\rule{0.3em}{0ex}}\mathrm{meV})$.
Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.
The authors present an all-optical technique for loading ion traps that has a number of advantages over conventional thermal atom sources. In our experiment a pulsed Nd:YAG laser at 1064 nm, with pulse energies up to 80 muJ and pulse durations in the region of 30 ns, is incident on a calcium metal surface. This generates a pulsed beam of atomic calcium from the metal surface. The atoms are subsequently photo-ionized in a resonant two-photon process by 272 nm light from a frequency-quadrupled fibre laser.