The integration of quantum communication protocols over Ethernet networks is proposed, showing the potential of combining classical and quantum technologies for efficient, scalable quantum networking. By leveraging the inherent strengths of Ethernet, such as addressing, MAC layer functionality, and scalability; we propose a practical framework to support the rigorous requirements of quantum communication. Some novel protocols given in this study enable reliable end-to-end quantum entanglement over Ethernet, ensuring the adaptability needed for implementing a stable quantum internet. Detailed time-delay analyses confirm that our protocols offer superior performance compared to existing methods, with total time delay kept within the decoherence threshold of qubits. These results suggest that our approach is well-suited for deployment in realistic environments, meeting both the immediate needs of quantum networking and laying the groundwork for future advances in data exchange and quantum computational capabilities.
The integration of quantum communication protocols over Ethernet networks is proposed, showing the potential of combining classical and quantum technologies for efficient, scalable quantum networking. By leveraging the inherent strengths of Ethernet, such as addressing, MAC layer functionality, and scalability; we propose a practical framework to support the rigorous requirements of quantum communication. Some novel protocols given in this study enable reliable end-to-end quantum entanglement over Ethernet, ensuring the adaptability needed for implementing a stable quantum internet. Detailed time-delay analyses confirm that our protocols offer superior performance compared to existing methods, with total time delay kept within the decoherence threshold of qubits. These results suggest that our approach is well-suited for deployment in realistic environments, meeting both the immediate needs of quantum networking and laying the groundwork for future advances in data exchange and quantum computational capabilities.
A quantum internet is one of the promises of the second quantum revolution. New difficulties arise when the first quantum network (QN) hardware prototypes get closer to completion. The development of scalable QN systems is still in its early stages, yet a functioning network is more than simply the physical tools. The proposed method offers a QN protocol that addresses the novel conceptual and technological difficulties posed by quantum physics and enables end-to-end quantum communication. As the key procedure in quantum information science, quantum entanglement swapping (QES) has the potential to revolutionise QN communication. The suggested paradigm, which considers entanglement, enables safe communication utilising a trusted third party across a long-distance QN. The protocols might act as the basic structure of a future quantum internet. Even if scaling and entanglement coherence issues must be overcome, this research provides the groundwork for improving error-correcting codes and fault-tolerant quantum computers.
Quantum information technology has the potential to revolutionize computing, communications, and security. To fully realize its potential, quantum processors with millions of qubits are needed, which are still far from being accomplished. Thus, it is important to establish quantum networks to enable distributed quantum computing to leverage existing and near-term quantum processors into more powerful resources. This paper proposes an efficient entanglement distribution protocol for classical-quantum networks with a limited number of quantum links, enabling quantum teleportation in near-term hybrid networks. The proposed protocol uses entanglement swapping and classical network coding to distribute entanglements efficiently while overcoming bottlenecks and minimizing qubit and link usage. Experimental results show that the proposed protocol requires quantum resources that scale linearly with network size, with individual nodes only requiring a fixed number of qubits. For small network sizes of up to three transceiver pairs, the proposed protocol outperforms the benchmark by using 17% fewer qubit resources, achieving 8.8% higher accuracy, and with a 35% faster simulation time. The percentage improvement increases significantly for large network sizes. We also propose a protocol for securing entanglement distribution against malicious entanglements using quantum state encoding through rotation. Our analysis shows that this method requires no communication overhead and reduces the chance of a malicious node retrieving the teleported state to 7.2%. The achieved results point toward a protocol that enables a highly scalable, efficient, and secure near-term quantum Internet.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
Quantum information technology has the potential to revolutionize computing, communications, and security. To fully realize its potential, quantum processors with millions of qubits are needed, which is still far from being accomplished. Thus, it is important to establish quantum networks to enable distributed quantum computing to leverage existing and near-term quantum processors into more powerful resources. This paper introduces a protocol to distribute entanglements among quantum devices within classical-quantum networks with limited quantum links, enabling more efficient quantum teleportation in near-term hybrid networks. The proposed protocol uses entanglement swapping to distribute entanglements efficiently in a butterfly network, then classical network coding is applied to enable quantum teleportation while overcoming network bottlenecks and minimizing qubit requirements for individual nodes. Experimental results show that the proposed protocol requires quantum resources that scale linearly with network size, with individual nodes only requiring a fixed number of qubits. For small network sizes of up to three transceiver pairs, the proposed protocol outperforms the benchmark by using 17% fewer qubit resources, achieving 8.8% higher accuracy, and with a 35% faster simulation time. The percentage improvement increases significantly for large network sizes. We also propose a protocol for securing entanglement distribution against malicious entanglements using quantum state encoding through rotation. Our analysis shows that this method requires no communication overhead and reduces the chance of a malicious node retrieving a quantum state to 7.2%. The achieved results point toward a protocol that enables a highly scalable, efficient, and secure near-term quantum Internet.
Abstract Quantum networks are a fundamental component of quantum technologies, playing a pivotal role in advancing distributed quantum computing and laying the groundwork for the future quantum internet. They offer a scalable modular architecture for quantum chips and support infrastructure for measurement-based quantum computing. Furthermore, quantum networks serve as the backbone of the quantum internet, ensuring high levels of security. Notably, the advantages of quantum networks in communication are contingent upon entanglement distribution, which faces challenges such as high latency in protocols relying on Bell pair distribution and bipartite entanglement swapping. Additionally, algorithms designed for multipartite entanglement routing encounter intractability issues, rendering them unsolvable within polynomial time. In this paper, we explore a novel approach to distribute graph states in quantum networks, leveraging local quantum coding (LQC) isometries and multipartite states transfer. We also present single-use bounds for stabilizer states distribution. Analogous to network coding, these bounds are attainable when appropriate isometries and stabilizer codes are selected for relay nodes, resulting in reduced latency in entanglement distribution. We further demonstrate the protocol’s advantages across various network performance metrics.
Future communication systems are expected to integrate quantum networks to enable highly secure communication and enhance computational capabilities. In quantum networks, communication is accomplished by sharing entanglement between remote locations, which is the basis for most known quantum protocols. Entanglement is a correlation between qubits that is not reproducible with classical means. However, as entanglement is susceptible to noise limiting its range, quantum repeaters can enable entanglement over more considerable distances. Using the entanglement swapping protocol, quantum repeaters can be placed between remote locations to establish entanglement. This requires each repeater to first generate entanglement with its neighboring nodes, named entanglement generation. However, as the size of current quantum networks is limited, the development and evaluation of quantum networks and quantum protocols is based on simulations. To simulate quantum networks accurately, accurate and high-performance models of the entanglement generation process must be employed. This paper proposes two new models for generating entanglement in simulations and develops quantum protocols for generating and purifying entanglement. The protocols are evaluated in thorough simulations under perfect and realistic conditions regarding delay and fidelity. Furthermore, the accuracy and runtime of the models are evaluated. The results show the models are accurate, with delay primarily influenced by the source duration, while longer coherence times significantly enhance fidelity. The model runtimes are consistently shorter than the simulation runtimes across all protocols, averaging about 2% of the total simulation time.