Future communication systems are expected to integrate quantum networks to enable highly secure communication and enhance computational capabilities. In quantum networks, communication is accomplished by sharing entanglement between remote locations, which is the basis for most known quantum protocols. Entanglement is a correlation between qubits that is not reproducible with classical means. However, as entanglement is susceptible to noise limiting its range, quantum repeaters can enable entanglement over more considerable distances. Using the entanglement swapping protocol, quantum repeaters can be placed between remote locations to establish entanglement. This requires each repeater to first generate entanglement with its neighboring nodes, named entanglement generation. However, as the size of current quantum networks is limited, the development and evaluation of quantum networks and quantum protocols is based on simulations. To simulate quantum networks accurately, accurate and high-performance models of the entanglement generation process must be employed. This paper proposes two new models for generating entanglement in simulations and develops quantum protocols for generating and purifying entanglement. The protocols are evaluated in thorough simulations under perfect and realistic conditions regarding delay and fidelity. Furthermore, the accuracy and runtime of the models are evaluated. The results show the models are accurate, with delay primarily influenced by the source duration, while longer coherence times significantly enhance fidelity. The model runtimes are consistently shorter than the simulation runtimes across all protocols, averaging about 2% of the total simulation time.
Future communication systems are expected to integrate quantum networks to enable highly secure communication and enhance computational capabilities. In quantum networks, communication is accomplished by sharing entanglement between remote locations, which is the basis for most known quantum protocols. Entanglement is a correlation between qubits that is not reproducible with classical means. However, as entanglement is susceptible to noise limiting its range, quantum repeaters can enable entanglement over more considerable distances. Using the entanglement swapping protocol, quantum repeaters can be placed between remote locations to establish entanglement. This requires each repeater to first generate entanglement with its neighboring nodes, named entanglement generation. However, as the size of current quantum networks is limited, the development and evaluation of quantum networks and quantum protocols is based on simulations. To simulate quantum networks accurately, accurate and high-performance models of the entanglement generation process must be employed. This paper proposes two new models for generating entanglement in simulations and develops quantum protocols for generating and purifying entanglement. The protocols are evaluated in thorough simulations under perfect and realistic conditions regarding delay and fidelity. Furthermore, the accuracy and runtime of the models are evaluated. The results show the models are accurate, with delay primarily influenced by the source duration, while longer coherence times significantly enhance fidelity. The model runtimes are consistently shorter than the simulation runtimes across all protocols, averaging about 2% of the total simulation time.
Emerging communication systems are expected to integrate new types of communication networks including quantum networks. In contrast to classical networks, the communication in quantum networks is accomplished with qubits and their attribute entanglement. Entanglement is a type of correlation between multiple qubits with no counterpart in classical communication. With the help of entanglement new protocols are developed to perform classical and quantum network tasks more efficiently. The main task of quantum networks is to share entanglement to distant communication partners with the help of intermediate nodes and repeated entanglement swapping, the so called Repeater Protocol. Due to the decoherence of quantum states, establishing entanglement has to be accomplished with minimal delay to preserve the states of qubits. This paper proposes a new Repeater Protocol FRP, which reduces delay by up to 51% and on average by 13% in establishing end-to-end entanglement compared with the direct approach CRP. Additionally, the provided solution lowers hardware requirements for quantum routers. Both protocols, CRP and FRP are evaluated in terms of end-to-end delay and fidelity in extensive simulations with a parameter search on 3 different topologies.
Quantum networks create a completely new way for communication, and the most important function of a quantum network is to generate long-distance quantum entanglement to serve a number of quantum applications. As the scale of the network expands, in order to establish end-to-end entanglement between two remote nodes, entangled pairs need to be generated and distributed among multiple repeaters along the path from the source to the destination, which requires a specific protocol to negotiate resource allocations and quantum operations among the repeaters. Thus, to realize such remote entanglement distribution in a quantum network, designing a stable and reliable protocol becomes urgent and necessary. In this article, we focus on how to guarantee the generation rate of entangled pairs between any two quantum nodes to meet the requirements of various quantum applications in a large-scale quantum network. We present a connection-oriented entanglement distribution protocol inspired by the connection-oriented communication model in classical networks. Our protocol is located in the network layer of the quantum network to enable end-to-end quantum communication. Three main features are provided by the proposed protocol: 1) it is reliable and can guarantee the successful entanglement generation; 2) it can reduce the influence of quantum decoherence via reducing the latency caused by resource competition; and 3) it can guarantee the rate of generating entanglement between two quantum nodes according to the requirement of quantum applications.
End-to-end entanglement distribution is a key capability of upcoming quantum networks, enabling applications like distributed quantum computing, quantum sensor networks, and secure communications. Hence, its realistic and efficient simulation is crucial for quantum network design and for assessing the ability of a network to run certain applications. This work provides tools to scale-up and improve the realism of entanglement generation simulations in quantum networks. This is achieved by deriving analytical results that directly return the success probability, the output state and corresponding fidelity of a selected entanglement generation protocol, while accounting for a variety of noise sources affecting the protocol. These results are then integrated and streamlined in an upgraded version of SeQUeNCe, one of the most popular quantum network simulators. The resulting simulator features increased scalability by reducing computation time by more than 60%, while allowing for a variety of realistic noise sources, including imperfect mode matching, dark counts, and imperfect memory initialization. The simulator is also benchmarked with real experimental data and is capable of replicating the average entanglement generation time and the final state fidelity of a selected experiment. Altogether, the results can enhance current quantum network simulation capabilities towards large-scale networks, paving the way for the future quantum internet.
Abstract Remote quantum entanglement can enable numerous applications including distributed quantum computation, secure communication, and precision sensing. We consider how a quantum network—nodes equipped with limited quantum processing capabilities connected via lossy optical links—can distribute high-rate entanglement simultaneously between multiple pairs of users. We develop protocols for such quantum “repeater” nodes, which enable a pair of users to achieve large gains in entanglement rates over using a linear chain of quantum repeaters, by exploiting the diversity of multiple paths in the network. Additionally, we develop repeater protocols that enable multiple user pairs to generate entanglement simultaneously at rates that can far exceed what is possible with repeaters time sharing among assisting individual entanglement flows. Our results suggest that the early-stage development of quantum memories with short coherence times and implementations of probabilistic Bell-state measurements can have a much more profound impact on quantum networks than may be apparent from analyzing linear repeater chains. This framework should spur the development of a general quantum network theory, bringing together quantum memory physics, quantum information theory, quantum error correction, and computer network theory.
With the emergence of the Quantum Internet, the need for advanced quantum networking techniques has significantly risen. Various models of quantum repeaters have been presented, each delineating a unique strategy to ensure quantum communication over long distances. We focus on repeaters that employ entanglement generation and swapping. This revolves around establishing remote end-to-end entanglement through repeaters, a concept we denote as the “quantum-native” repeaters (also called “first-generation” repeaters in some literature). The challenges in routing with quantum-native repeaters arise from probabilistic entanglement generation and restricted coherence time. Current approaches use synchronized time slots to search for entanglement-swapping paths, resulting in inefficiencies. Here, we propose a new set of asynchronous routing protocols for quantum networks by incorporating the idea of maintaining a dynamic topology in a distributed manner, which has been extensively studied in classical routing for lossy networks, such as using a destination-oriented directed acyclic graph or a spanning tree. The protocols update the entanglement-link topology asynchronously, identify optimal entanglement-swapping paths, and preserve unused direct-link entanglements. Our results indicate that asynchronous protocols achieve a larger upper bound with an appropriate setting and significantly higher entanglement rate than existing synchronous approaches, and the rate increases with coherence time, suggesting that it will have a much more profound impact on quantum networks as technology advances.
Entanglement-based networks (EBNs) enable general-purpose quantum communication by combining entanglement and its swapping in a sequence that addresses the challenges of achieving long-distance communication with high fidelity associated with quantum technologies. In this context, entanglement distribution refers to the process by which two nodes in a quantum network share an entangled state, serving as a fundamental resource for communication. In this paper, we study the performance of entanglement distribution mechanisms over a physical topology comprising end nodes and quantum switches, which are crucial for constructing large-scale links. To this end, we implemented a switch-based topology in NetSquid and conducted a series of simulation experiments to gain insight into practical and realistic quantum network engineering challenges. These challenges include, on the one hand, aspects related to quantum technology, such as memory technology, gate durations, and noise; and, on the other hand, factors associated with the distribution process, such as the number of switches, distances, purification, and error correction. All these factors significantly impact the end-to-end fidelity across a path, which supports communication between two quantum nodes. We use these experiments to derive some guidelines towards the design and configuration of future EBNs.