A Review and Collection of Metrics and Benchmarks for Quantum Computers: definitions, methodologies and software
Deep Lall, Abhishek Agarwal, Weixi Zhang, Lachlan P. Lindoy, Tor Lindström, Stephanie Webster, Simon Hall, Nicholas Chancellor, Petros Wallden, Raúl García−Patrón, Elham Kashefi, Viv M. Kendon, Jonathan Pritchard, Alessandro Rossi, Animesh Datta, Theodoros Kapourniotis, Κωνσταντίνος Γεωργόπουλος, Ivan Rungger
Quantum computers have the potential to provide an advantage over classical computers in a number of areas. Numerous metrics to benchmark the performance of quantum computers, ranging from their individual hardware components to entire applications, have been proposed over the years. Objective comparisons are further hampered in practice as different variations of the same metric are used, and the data disclosed together with a reported metric value is often not sufficient to reproduce the measurements. In this poster, we present our recent article, where we address these challenges by providing a review of metrics and benchmarks for quantum computers [1], including 1) a comprehensive collection of benchmarks allowing holistic comparisons of quantum computers, 2) a consistent format of the definitions across all metrics including a transparent description of the methodology and of the main assumptions and limitations, and 3) a reproducible approach by linking the metrics to open-source software used to evaluate them . We identify five areas where international standardization working groups could be established, namely: i) the identification and agreement on the categories of metrics that comprehensively benchmark device performance; ii) the identification and agreement on a set of well-established metrics that together comprehensively benchmark performance; iii) the identification of metrics specific to hardware platforms, including non-gate-based quantum computers; iv) inter-laboratory comparison studies to develop best practice guides for measurement methodology; and v) agreement on what data and software should be reported together with a metric value to ensure trust, transparency and reproducibility. We provide potential routes to advancing these areas. We expect that this work will accelerate the progress of quantum computing hardware towards quantum advantage. [1] D. Lall et al., A Review and Collection of Metrics and Benchmarks for Quantum Computers: Definitions, Methodologies and Software, arXiv:2502.06717.
Quantum computers have the potential to provide an advantage over classical computers in a number of areas. Numerous metrics to benchmark the performance of quantum computers, ranging from their individual hardware components to entire applications, have been proposed over the years. Objective comparisons are further hampered in practice as different variations of the same metric are used, and the data disclosed together with a reported metric value is often not sufficient to reproduce the measurements. In this poster, we present our recent article, where we address these challenges by providing a review of metrics and benchmarks for quantum computers [1], including 1) a comprehensive collection of benchmarks allowing holistic comparisons of quantum computers, 2) a consistent format of the definitions across all metrics including a transparent description of the methodology and of the main assumptions and limitations, and 3) a reproducible approach by linking the metrics to open-source software used to evaluate them . We identify five areas where international standardization working groups could be established, namely: i) the identification and agreement on the categories of metrics that comprehensively benchmark device performance; ii) the identification and agreement on a set of well-established metrics that together comprehensively benchmark performance; iii) the identification of metrics specific to hardware platforms, including non-gate-based quantum computers; iv) inter-laboratory comparison studies to develop best practice guides for measurement methodology; and v) agreement on what data and software should be reported together with a metric value to ensure trust, transparency and reproducibility. We provide potential routes to advancing these areas. We expect that this work will accelerate the progress of quantum computing hardware towards quantum advantage. [1] D. Lall et al., A Review and Collection of Metrics and Benchmarks for Quantum Computers: Definitions, Methodologies and Software, arXiv:2502.06717.
As quantum computing (QC) continues to evolve in hardware and software, measuring progress in this complex and diverse field remains a challenge. To track progress, uncover bottlenecks, and evaluate community efforts, benchmarks play a crucial role. But which benchmarking approach best addresses the diverse perspectives of QC stakeholders? We conducted the most comprehensive systematic literature review of this area to date, combining NLP-based clustering with expert analysis to develop a novel taxonomy and definitions for QC benchmarking, aligned with the quantum stack and its stakeholders. In addition to organizing benchmarks in distinct hardware, software, and application focused categories, our taxonomy hierarchically classifies benchmarking protocols in clearly defined subcategories. We develop standard terminology and map the interdependencies of benchmark categories to create a holistic, unified picture of the quantum benchmarking landscape. Our analysis reveals recurring design patterns, exposes research gaps, and clarifies how benchmarking methods serve different stakeholders. By structuring the field and providing a common language, our work offers a foundation for coherent benchmark development, fairer evaluation, and stronger cross-disciplinary collaboration in QC.
Abstract The technological development of increasingly larger quantum processors on different quantum platforms raises the problem of how to fairly compare their performance, known as quantum benchmarking of quantum processors. This is a challenge that computer scientists have already faced when comparing classical processors, leading to the development of various mathematical tools to address it, but also to the identification of the limits of this problem. In this work, we briefly review the most important aspects of both classical processor benchmarks and the metrics comprising them, providing precise definitions and analyzing the quality attributes that they should exhibit. Subsequently, we analyze the intrinsic properties that characterize the paradigm of quantum computing and hinder the naive transfer of strategies from classical benchmarking. However, we can still leverage some of the lessons learned such as the quality attributes of a good benchmark such as relevance, reproducibility, fairness, verifiability and usability. Additionally, we review some of the most important metrics and benchmarks for quantum processors proposed in the literature, assessing what quality attributes they fulfill. Finally, we propose general guidelines for quantum benchmarking. These guidelines aim to pave the way for establishing a roadmap towards standardizing the performance evaluation of quantum devices, ultimately leading to the creation of an organization akin to the Standard Performance Evaluation Corporation (SPEC).
Architectures for quantum computing can only be scaled up when they are accompanied by suitable benchmarking techniques. The document provides a comprehensive overview of the state and recommendations for systematic benchmarking of quantum computers. Benchmarking is crucial for assessing the performance of quantum computers, including the hardware, software, as well as algorithms and applications. The document highlights key aspects such as component-level, system-level, software-level, HPC-level, and application-level benchmarks. Component-level benchmarks focus on the performance of individual qubits and gates, while system-level benchmarks evaluate the entire quantum processor. Software-level benchmarks consider the compiler's efficiency and error mitigation techniques. HPC-level and cloud benchmarks address integration with classical systems and cloud platforms, respectively. Application-level benchmarks measure performance in real-world use cases. The document also discusses the importance of standardization to ensure reproducibility and comparability of benchmarks, and highlights ongoing efforts in the quantum computing community towards establishing these benchmarks. Recommendations for future steps emphasize the need for developing standardized evaluation routines and integrating benchmarks with broader quantum technology activities.
Quantum computing promises to offer significant computational advantages over classical computing, leveraging principles such as superposition and entanglement. This necessitates effective metrics and measurement techniques for evaluating quantum systems, aiding in their development and performance optimization. However, due to fundamental differences in computing paradigms, and current immaturity of quantum software abstractions, classical software and hardware metrics may not directly apply to quantum computing, where the distinction between software and hardware can still be somewhat indiscernible compared to classical computing. This paper provides a comprehensive review of existing quantum software and hardware metrics in the scientific literature, highlighting key challenges in the field. Additionally, it investigates the application of Functional Size Measurement (FSM) based on COSMIC ISO 19761 to measure quantum software. Three FSM approaches are analyzed by applying them to Shor’s and Grover’s algorithms, with measurement results compared to assess their effectiveness. A comparative analysis highlights the strengths and limitations of each approach, emphasizing the need for further refinement. The insights from this study contribute to the advancement of quantum metrics, especially software metrics and measurement, paving the way for the development of a unified and standardized approach to quantum software measurement and assessment.
As quantum computing systems continue to mature, there is an increasing need for benchmarking methodologies that capture performance in terms of meaningful, application-level metrics. In this work, we present a scalable framework for application-level quantum benchmarking that is designed to support internal system evaluation and cross-platform comparison across technology providers. Our framework is guided by a set of core principles, including measurability, simplicity, scalability, and extensibility. We present 13 benchmark families that reflect realistic workloads across multiple domains. This enables the systematic evaluation of the quality of solutions, the total execution time, total used energy, as well as Time-to-Solution. The benchmarks are designed to be reproducible, interpretable across stakeholder groups, and adaptable to evolving system capabilities. The framework aims to bridge the gap between low-level performance metrics and real-world value, providing a unified approach to assessing quantum systems. The resulting benchmarks support development and validation and contribute to the foundation of industry-wide benchmarking standards.
We present Benchpress, a benchmarking suite for evaluating the performance and range of functionality of multiple quantum computing software development kits. This suite consists of a collection of over 1,000 tests measuring key performance metrics for a wide variety of operations on quantum circuits composed of up to 930 qubits and O(106) two-qubit gates, as well as an execution framework for running the tests over multiple quantum software packages in a unified manner. Here we give a detailed overview of the benchmark suite and its methodology and generate representative results over seven different quantum software packages. The flexibility of the Benchpress framework enables benchmarking that not only keeps pace with quantum hardware improvements but also can preemptively gauge the quantum circuit processing costs of future device architectures. In this Resource, the authors present an open-source extensible benchmark tool, Benchpress, for evaluating the performance of mainstream quantum computing software. Benchpress was demonstrated to perform over 1,000 tests with up to 930 qubits to compare the performance of quantum software, providing insight into how to best use current programming stacks.