Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2501.18938 · Review of Scientific Instruments

Stabilizing an optical cavity containing a bulk diamond crystal at millikelvin temperatures in a cryogen-free dilution refrigerator

Tatsuki Hamamoto, Amit Bhunia, Hiroki Takahashi, Yuimaru Kubo

Published Aug 1, 2025• 1 citation
arXivHTMLPDF

Abstract

We successfully stabilized a Fabry-Pérot optical cavity incorporating a bulk diamond crystal at millikelvin temperatures in a cryogen-free dilution refrigerator with the pulse-tube cryocooler running. In stark contrast to previous demonstrations where lasers were locked to the cavities, our setup locks the cavity to the laser, thereby ensuring that emitted photons remain at a stable, predetermined frequency. This stability is advantageous for efficient quantum networking applications (e.g., remote entanglement generation) that require indistinguishable photons. Our measurements of cavity length fluctuation suggest that the setup could stabilize a cavity up to a finesse of 1.3 × 104 without the diamond and 5.3 × 103 with the diamond crystal. The finesse with a diamond crystal of ∼90 is primarily limited by the absorption loss inside the diamond.

DOI
10.1063/5.0265492

Related papers

Design and low-temperature characterization of a tunable microcavity for diamond-based quantum networks

Stefan Bogdanović, Suzanne B. van Dam, Cristian Bonato +8 more

We report on the fabrication and characterization of a Fabry-Perot microcavity enclosing a thin diamond membrane at cryogenic temperatures. The cavity is designed to enhance resonant emission of single nitrogen-vacancy centers by allowing spectral and spatial tuning while preserving the optical properties observed in bulk diamond. We demonstrate cavity finesse at cryogenic temperatures within the range of F=4000–12 000 and find a sub-nanometer cavity stability. Modeling shows that coupling nitrogen-vacancy centers to these cavities could lead to an increase in remote entanglement success rates by three orders of magnitude.

arXiv:1612.02164•Applied Physics Letters•Apr 24, 2017•56 citations

Dynamic Fabry-Pérot cavity stabilization technique for atom-cavity experiments

S. P. Dinesh, V. R. Thakar, V. I. Gokul +2 more

Abstract We present a stabilization technique developed to lock and dynamically tune the resonant frequency of a moderate finesse Fabry-Pérot (FP) cavity used in precision atom-cavity quantum electrodynamics (QED) experiments. Most experimental setups with active stabilization either operate at one fixed resonant frequency or use transfer cavities to achieve the ability to tune the resonant frequency of the cavity. In this work, we present a simple and cost-effective solution to actively stabilize an optical cavity while achieving a dynamic tuning range of over 100 MHz with a precision under 1 MHz. Our unique scheme uses a reference laser locked to an electro-optic modulator (EOM) shifted saturation absorption spectroscopy (SAS) signal. The cavity is locked to the PDH error signal obtained from the dip in the reflected intensity of this reference laser. Our setup provides the feature to efficiently tune the resonant frequency of the cavity by only changing the EOM drive without unlocking and re-locking either the reference laser or the cavity. We present measurements of precision control of the resonant cavity frequency and vacuum Rabi splitting (VRS) to quantify the stability achieved and hence show that this technique is suitable for a variety of cavity QED experiments.

arXiv:2310.16415•EPJ Techniques and Instrumentation•Jan 30, 2024•7 citations

Towards Quantum Networks with Color Centers in Diamond

Tatsuki Hamamoto

Connecting cryogenic solid-state quantum processors with room-temperature optical links is a key step toward a scalable quantum computer. This thesis presents two technological advancements toward the realization of a spin-ensemble-based quantum transducer using impurity spins in diamond. First, a low-loss dielectric microwave resonator based on rutile (TiO2) was developed, achieving an internal quality factor of Qint ∼ 104 despite incorporating large optical apertures. Second, an optical Fabry–Pérot cavity was stabilized at millikelvin temperatures with sub-0.1 nm root-mean-square cavity length fluctuations, enabling stable cavity locking to the laser in a dilution refrigerator. These components were integrated into a hybrid resonator enabling spatial mode overlap within a diamond sample containing an ensemble of nitrogen-vacancy centers. Measurements at 10 mK revealed spin coherence times of T1 = 1930 s and T2 = 470 µs, and characterized the inhomogeneous broadening of the optical transition. We estimate the current microwave-to-optical conversion efficiency and discuss potential improvements through device and cavity optimization. This work establishes a platform for spin ensemble-based transducers operating at millikelvin temperatures.

•Dec 31, 2025•0 citations

Fabry-Perot microcavity for diamond-based photonics

Erika Janitz, Maximilian Ruf, Mark Dimock +3 more

Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high-purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick ($>10\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\text{m}$) diamond membrane with a finesse of 17 000, corresponding to a quality factor $Q\ensuremath{\sim}{10}^{6}$. Such minimally fabricated thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe modified microcavity spectra in the presence of the membrane, and we develop analytic and numerical models to describe the effect of the membrane on cavity modes, including loss and coupling to higher-order transverse modes. We estimate that a Purcell enhancement of approximately 20 should be possible for emitters within the diamond in this device, and we provide evidence that better diamond surface treatments and mirror coatings could increase this value to 200 in a realistic system.

arXiv:1508.06588•Physical Review A•Oct 30, 2015•86 citations

Development of a Cryogen-Free Dilution Refrigerator for Superconducting Quantum Computing

Yujia Zhai, Shiguang Wu, Dong Ma +5 more

The superconducting quantum computer with strong data storage capability and fast execution speed has attracted a lot of attention in recent years and is finding practical applications in fields such as finance, military, biomedicine, and artificial intelligence. To suppress the thermal noise and to achieve high coherence, the quantum chips require millikelvin temperature, which poses a significant challenge for the suitable cryogenic system. The dilution refrigerator (DR) with ultra-low vibration and electromagnetic interference becomes an appropriate candidate for this purpose. To achieve the aimed millikelvin temperature, a cryogen-free DR composed of a Gifford-McMahon type pulse tube refrigerator (GM-type PTR), Joule-Thompson refrigerator (JTR), and dilution unit is investigated. This article presents the structural design of the DR and the coupling system with superconducting quantum chips. The cooling performance of the designed DR is estimated based on the developed cryogenic system. The minimum deduced temperature of 0.76 K in the still is achieved and the next steps to obtain the final temperature of 5 mK are underway.

IEEE Transactions on Applied Superconductivity•Jan 8, 2024•2 citations

Diamond-based Fabry-Perot microcavities for quantum networks

Stefan Bogdanović

A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.

•Jan 1, 2017•0 citations
We successfully stabilized a Fabry-Pérot optical cavity incorporating a bulk diamond crystal at millikelvin temperatures in a cryogen-free dilution refrigerator with the pulse-tube cryocooler running. In stark contrast to previous demonstrations where lasers were locked to the cavities, our setup locks the cavity to the laser, thereby ensuring that emitted photons remain at a stable, predetermined frequency. This stability is advantageous for efficient quantum networking applications (e.g., remote entanglement generation) that require indistinguishable photons. Our measurements of cavity length fluctuation suggest that the setup could stabilize a cavity up to a finesse of 1.3 × 104 without the diamond and 5.3 × 103 with the diamond crystal. The finesse with a diamond crystal of ∼90 is primarily limited by the absorption loss inside the diamond.
We report on the fabrication and characterization of a Fabry-Perot microcavity enclosing a thin diamond membrane at cryogenic temperatures. The cavity is designed to enhance resonant emission of single nitrogen-vacancy centers by allowing spectral and spatial tuning while preserving the optical properties observed in bulk diamond. We demonstrate cavity finesse at cryogenic temperatures within the range of F=4000–12 000 and find a sub-nanometer cavity stability. Modeling shows that coupling nitrogen-vacancy centers to these cavities could lead to an increase in remote entanglement success rates by three orders of magnitude.
Abstract We present a stabilization technique developed to lock and dynamically tune the resonant frequency of a moderate finesse Fabry-Pérot (FP) cavity used in precision atom-cavity quantum electrodynamics (QED) experiments. Most experimental setups with active stabilization either operate at one fixed resonant frequency or use transfer cavities to achieve the ability to tune the resonant frequency of the cavity. In this work, we present a simple and cost-effective solution to actively stabilize an optical cavity while achieving a dynamic tuning range of over 100 MHz with a precision under 1 MHz. Our unique scheme uses a reference laser locked to an electro-optic modulator (EOM) shifted saturation absorption spectroscopy (SAS) signal. The cavity is locked to the PDH error signal obtained from the dip in the reflected intensity of this reference laser. Our setup provides the feature to efficiently tune the resonant frequency of the cavity by only changing the EOM drive without unlocking and re-locking either the reference laser or the cavity. We present measurements of precision control of the resonant cavity frequency and vacuum Rabi splitting (VRS) to quantify the stability achieved and hence show that this technique is suitable for a variety of cavity QED experiments.
Connecting cryogenic solid-state quantum processors with room-temperature optical links is a key step toward a scalable quantum computer. This thesis presents two technological advancements toward the realization of a spin-ensemble-based quantum transducer using impurity spins in diamond. First, a low-loss dielectric microwave resonator based on rutile (TiO2) was developed, achieving an internal quality factor of Qint ∼ 104 despite incorporating large optical apertures. Second, an optical Fabry–Pérot cavity was stabilized at millikelvin temperatures with sub-0.1 nm root-mean-square cavity length fluctuations, enabling stable cavity locking to the laser in a dilution refrigerator. These components were integrated into a hybrid resonator enabling spatial mode overlap within a diamond sample containing an ensemble of nitrogen-vacancy centers. Measurements at 10 mK revealed spin coherence times of T1 = 1930 s and T2 = 470 µs, and characterized the inhomogeneous broadening of the optical transition. We estimate the current microwave-to-optical conversion efficiency and discuss potential improvements through device and cavity optimization. This work establishes a platform for spin ensemble-based transducers operating at millikelvin temperatures.
Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high-purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick ($>10\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\text{m}$) diamond membrane with a finesse of 17 000, corresponding to a quality factor $Q\ensuremath{\sim}{10}^{6}$. Such minimally fabricated thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe modified microcavity spectra in the presence of the membrane, and we develop analytic and numerical models to describe the effect of the membrane on cavity modes, including loss and coupling to higher-order transverse modes. We estimate that a Purcell enhancement of approximately 20 should be possible for emitters within the diamond in this device, and we provide evidence that better diamond surface treatments and mirror coatings could increase this value to 200 in a realistic system.
The superconducting quantum computer with strong data storage capability and fast execution speed has attracted a lot of attention in recent years and is finding practical applications in fields such as finance, military, biomedicine, and artificial intelligence. To suppress the thermal noise and to achieve high coherence, the quantum chips require millikelvin temperature, which poses a significant challenge for the suitable cryogenic system. The dilution refrigerator (DR) with ultra-low vibration and electromagnetic interference becomes an appropriate candidate for this purpose. To achieve the aimed millikelvin temperature, a cryogen-free DR composed of a Gifford-McMahon type pulse tube refrigerator (GM-type PTR), Joule-Thompson refrigerator (JTR), and dilution unit is investigated. This article presents the structural design of the DR and the coupling system with superconducting quantum chips. The cooling performance of the designed DR is estimated based on the developed cryogenic system. The minimum deduced temperature of 0.76 K in the still is achieved and the next steps to obtain the final temperature of 5 mK are underway.
A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.