Operating Semiconductor Qubits without Individual Barrier Gates
Alexander Ivlev, Damien R. Crielaard, Marcel Meyer, William I. L. Lawrie, Nico W. Hendrickx, Amir Sammak, Yuta Matsumoto, Lieven M. K. Vandersypen, Giordano Scappucci, Corentin Déprez, Menno Veldhorst
Semiconductor spin qubits have emerged as a promising platform for quantum computing, following a significant improvement in their control fidelities over recent years. Increasing the qubit count remains challenging, beginning with the fabrication of small features and complex fan-outs. A particular challenge has been formed by the need for individual barrier gates to control the exchange interaction between adjacent spin qubits. Here, we propose a method to vary two-qubit interactions without applying pulses on individual barrier gates while also remaining insensitive to detuning noise in first order. Experimentally we find that changing plunger gate voltages over 300 mV can tune the exchange energy J from 100 kHz to 60 MHz. This allows us to perform two-qubit operations without changing the barrier gate voltage. Based on these findings we conceptualize a spin qubit architecture without individual barrier gates, simplifying the fabrication while maintaining the control necessary for universal quantum computation.
Semiconductor spin qubits have emerged as a promising platform for quantum computing, following a significant improvement in their control fidelities over recent years. Increasing the qubit count remains challenging, beginning with the fabrication of small features and complex fan-outs. A particular challenge has been formed by the need for individual barrier gates to control the exchange interaction between adjacent spin qubits. Here, we propose a method to vary two-qubit interactions without applying pulses on individual barrier gates while also remaining insensitive to detuning noise in first order. Experimentally we find that changing plunger gate voltages over 300 mV can tune the exchange energy J from 100 kHz to 60 MHz. This allows us to perform two-qubit operations without changing the barrier gate voltage. Based on these findings we conceptualize a spin qubit architecture without individual barrier gates, simplifying the fabrication while maintaining the control necessary for universal quantum computation.
The growing interest in quantum computers has triggered various approaches for the realization of a large-scale quantum processor that can eventually outperform classical high-performance computers. Quantum computers are attracting increasing attention for their potential to enormously accelerate the simulation of quantum systems and the solution of optimization problems, promising an immense impact, particularly in fields such as chemistry, medicine, and cybersecurity. Although it is still a long way to a practical quantum device, the progress over the last decades has shown encouraging results for a so far limited number of quantum bits, or qubits for short, which represent the computational units of the processor. One promising platform for the implementation of qubits is the spin of charge carriers in semiconductor quantum dots. Especially the use of purified silicon as a host material has significantly improved the performance of quantum operations. Advanced fabrication techniques from the established semiconductor industry in principle allow for the manufacturing of a large number of qubits on a small chip, making them specifically competitive from the perspective of scalability. In this thesis, we investigate challenges for electron spin qubits, particularly in the context of scaling to large qubit arrays for quantum computation. We evaluate the performance of quantum gates, present error mitigation strategies, and propose new quantum operations for two particular spin qubit implementations. In a dense array of Loss-DiVincenzo spin qubits on a chip, quantum information can be electrically controlled by microwave pulses. For neighboring qubits, capacitive couplings of nearby electrodes lead to crosstalk that affects the quantum computation. The first examination in this thesis addresses the effect of crosstalk on idling and operating spin qubits due to an interfering microwave drive. After the analysis and characterization of the performance, we suggest mitigation protocols for different constellations of important quantum gates, which can be easily implemented experimentally. We further show how to reduce crosstalk in a two-qubit gate using an asymmetric driving scheme, resulting in an enormous improvement of the gate performance, and may be used to generally overcome the obstacle of crosstalk. An additional source of errors in spin qubit registers originates from the finite residual exchange interaction between neighboring qubits. It arises due to a finite overlap of the electron wave functions and is caused by the limited speed at which the applied voltages can be controlled. We evaluate the fidelity of doing quantum operations under these circumstances with a varying number of neighboring qubits and present robust mitigation schemes with a decent performance also in the presence of noise. Besides crosstalk, another crucial observation in experiments using microwaves is the heating caused by the delivery of high-power radio frequency pulses to the quantum chip and results in a change of the qubit properties. We therefore investigate the impact of phonons on the energy levels in spin qubits to identify a temperature-dependent correction to the qubit state splitting. As microwave pulses are associated with potential errors, exchange-only qubits represent a promising alternative to achieve universal quantum computation only using baseband control. Therefore, we shift our focus towards exchange-only qubits and outline the main error sources in these systems, including residual exchange interactions between spins, charge noise from the applied voltages, and magnetic fluctuations in the material. A consequential complication of this implementation is that the quantum information can leak out of the qubit states. This effect, however, can be reduced in the presence of a finite magnetic field, as we will demonstrate in this thesis. The gate construction for exchange-only qubits usually requires more pulse steps than in the previous qubit type. Nevertheless, if exchange interactions are switched on simultaneously, this can result in faster quantum gates, as we demonstrate in this thesis. Especially the discovery of a quantum operation that introduces relative phases between computational and leakage states can be of interest for the construction of two-qubit gates and will be discussed in an example for a special operation space.
Abstract Capacitively coupled semiconductor spin qubits hold promise as the building blocks of a scalable quantum computing architecture with long-range coupling between distant qubits. However, the two-qubit gate fidelities achieved in experiments to date have been severely limited by decoherence originating from charge noise and hyperfine interactions with nuclear spins, and are currently unacceptably low for any conceivable multi-qubit gate operations. Here, we present control protocols that implement two-qubit entangling gates while substantially suppressing errors due to both types of noise. These protocols are obtained by making simple modifications to control sequences already used in the laboratory and should thus be easy enough for immediate experimental realisation. Together with existing control protocols for robust single-qubit gates, our results constitute an important step toward scalable quantum computation using spin qubits in semiconductor platforms.
The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. To increase the number of qubits to the thousands or millions of qubits needed for practical quantum information, we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for nonplanar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates enable qubit addressability and readout. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning-noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future.
Hole spin qubits hosted in Germanium quantum dots are promising candidates for scalable quantum computing. The strong spin-orbit interaction can enable fast and all-electrical quantum control. Furthermore, the platform can implement universal quantum control using only baseband signals, which may mitigate the impact of crosstalk and microwave-induced heating. At the same time, spin-orbit interaction gives rise to an anisotropic exchange interaction, whose potential for implementing two-qubit gates has remained largely unexplored. However, the current performance of operating a hole-based quantum computer is mostly limited by dephasing due to low-frequency charge noise. In this work, we propose a novel two-qubit gate protocol for Germanium hole spin qubits operated in the gapless regime. This gate protocol exploits the anisotropic exchange interaction between neighboring spins and utilizes a composite pulse scheme implemented solely through electrical baseband signals. Using this approach, we predict high-fidelity two-qubit controlled-Z operations that can suppress exchange-energy fluctuations, offering a pathway toward fault-tolerant semiconductor quantum processors.
Semiconductors are among the most promising platforms to implement large-scale quantum computers, as advanced manufacturing techniques allow fabrication of large quantum dot arrays1. Various qubit encodings can be used to store and manipulate quantum information on these quantum dot arrays. Regardless of qubit encoding, precise control over the exchange interaction between electrons confined in quantum dots in the array is critical. Furthermore, it is necessary to execute high-fidelity quantum operations concurrently to make full use of the limited coherence of individual qubits. Here we demonstrate the parallel operation of two exchange-only qubits, consisting of six quantum dots in a linear arrangement. Using randomized benchmarking (RB) techniques, we show that issuing pulses on the five barrier gates to modulate exchange interactions in a maximally parallel way maintains the quality of qubit control relative to sequential operation. The techniques developed to perform parallel exchange pulses can be readily adapted to other quantum-dot-based encodings. Moreover, we show the first, to our knowledge, experimental demonstrations of an iSWAP gate for exchange-only qubits and of a charge-locking Pauli spin blockade (PSB) readout method. The results are validated using cross-entropy benchmarking (XEB)2, a technique useful for performance characterization of larger quantum computing systems; here it is used for the first time on a quantum system based on semiconductor technology. Parallel operation of two exchange-only qubits consisting of six quantum dots arranged linearly is shown to be achievable and maintains qubit control quality compared with sequential operation, with potential for use in scaled quantum computing.
We demonstrate a substantial improvement in the spin-exchange gate using symmetric control instead of conventional detuning in GaAs spin qubits, up to a factor of six increase in the quality factor of the gate. For symmetric operation, nanosecond voltage pulses are applied to the barrier that controls the interdot potential between quantum dots, modulating the exchange interaction while maintaining symmetry between the dots. Excellent agreement is found with a model that separately includes electrical and nuclear noise sources for both detuning and symmetric gating schemes. Unlike exchange control via detuning, the decoherence of symmetric exchange rotations is dominated by rotation-axis fluctuations due to nuclear field noise rather than direct exchange noise.