Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2501.02141 · United States National Committee of URSI National Radio Science Meeting

Fast and Accurate Method for Doppler Averaging of Rydberg EIT Signals

Omar Nagib, Thad G Walker

Published Jan 7, 2025• 2 citations
arXivHTMLPDF

Abstract

Modeling the effect of Doppler broadening due to the thermal atomic motion of Rydberg sensors typically relies on sampling a large velocity class, solving the equations of motion for each velocity, and then averaging the atomic density matrix over that velocity class. This process is inexact, slow, and presents a bottleneck in simulating Rydberg sensors. We present an approach that allows for fast, exact velocity averaging just by solving the equations of motion twice. We find the “propagator” that acts on the zero-velocity solution to generate the velocity-dependent atomic state for all velocities. By averaging this propagator over the Maxwell-Boltzmann velocity distribution of the atoms, we obtain an explicit, analytic formula that generates the averaged atomic state. This method is expected to save memory and time computational resources by one to several orders of magnitude, compared to traditional sampling approaches.

DOI
10.23919/usnc-ursinrsm66067.2025.10906811

Related papers

Efficient Simulation of Doppler-Broadened Rydberg Quantum Receivers via Monte Carlo Wave Functions

Wenjie Ding, Xinyi Y. I. Xu, Guoda Xie +4 more

Theoretical modeling of Rydberg atom-based microwave sensors is often limited by the high computational cost of the density matrix formalism (DMF), especially when resolving transient dynamics in Doppler-broadened vapor cells. We introduce an efficient direct time-domain numerical framework based on the Monte Carlo Wave Function (MCWF) method for Doppler-broadened Rydberg-atom simulations. By incorporating the Doppler effect as a stochastic initialization parameter within individual quantum trajectories, our approach naturally captures thermal broadening, thereby avoiding explicit velocity-grid integration in the MCWF calculation. This reformulates the propagation from a density-matrix representation whose state dimension scales quadratically with the number of levels to a trajectory-based wave-function representation with linear state dimension for each propagated trajectory. We demonstrate that this framework achieves nearly one order of magnitude reduction in runtime under comparable AT-splitting extraction accuracy, while maintaining agreement with the DMF results for the considered observables. The method is further applied to representative time-domain signal-recovery scenarios, including baseband symbol recovery for 8-ary amplitude-shift keying (8-ASK) signals. This work provides a scalable tool for designing and optimizing next-generation Rydberg quantum receivers.

IEEE journal on multiscale and multiphysics computational techniques•Jan 1, 2026•0 citations

RydIQule: A graph-based paradigm for modeling Rydberg and atomic sensors

Benjamin N. Miller, David H. Meyer, Teemu Virtanen +2 more

We describe a numerical technique and accompanying open-source Python software package called RydIQule. RydIQule uses a directional graph, relying on adjacency matrices and path-finding to generate a Hamiltonian for multi-level atomic systems. RydIQule then constructs semi-classical equations of motion (Bloch equations) into a tensor which can store an entire simulation consisting of varied system parameters. Using this framework, RydIQule returns solutions significantly faster than typical for interpreted programming languages. RydIQule extends beyond the capabilities of currently-available tools, facilitating rapid development in atomic and Rydberg spectroscopy. To demonstrate its utility, we use RydIQule to simulate a Doppler-broadened Rydberg atomic sensor that simultaneously demodulates five rf tones spanning from 1.7 to 116 GHz. Using RydIQule, this simulation can be solved in several hours on a commercial off-the-shelf desktop computer.

arXiv:2307.15673•Computer Physics Communications•Oct 11, 2023•32 citations

Rydberg Atom Electric Field Sensors as Linear Time-Invariant Systems

Neel Malvania, Garry M. Jacyna, Bonnie L. Schmittberger +5 more

Over the past decade, Rydberg atom electric field sensors have been under investigation as potential alternatives or complements to conventional antenna-based receivers for select applications in RF communications, remote sensing, and precision metrology. To understand the potential utility of these devices for various use cases, it is crucial to develop models that accurately predict key performance metrics such as instantaneous bandwidth and dynamic range. However, existing numerical models require solving a large set of coupled differential equations that is computationally intensive and lengthy to solve. We present an analytic approach that can be used to derive an impulse response function that allows up to two orders-of-magnitude reduction in computation time compared to the full time-dependent integration of the equations of motion. This approach can be used to enable rapid assessments of the Rydberg sensor's response to various waveforms.

arXiv:2505.00159•IEEE Transactions on Quantum Engineering•Jan 1, 2026•0 citations

Quantum-Enhanced Velocimetry with Doppler-Broadened Atomic Vapor

Zilong Chen, Hong Ming Lim, Chang Cang Huang +2 more

Traditionally, measuring the center-of-mass (c.m.) velocity of an atomic ensemble relies on measuring the Doppler shift of the absorption spectrum of single atoms in the ensemble. Mapping out the velocity distribution of the ensemble is indispensable when determining the c.m. velocity using this technique. As a result, highly sensitive measurements require preparation of an ensemble with a narrow Doppler width. Here, we use a dispersive measurement of light passing through a moving room temperature atomic vapor cell to determine the velocity of the cell in a single shot with a short-term sensitivity of 5.5 μm s^{-1} Hz^{-1/2}. The dispersion of the medium is enhanced by creating quantum interference through an auxiliary transition for the probe light under electromagnetically induced transparency condition. In contrast to measurement of single atoms, this method is based on the collective motion of atoms and can sense the c.m. velocity of an ensemble without knowing its velocity distribution. Our results improve the previous measurements by 3 orders of magnitude and can be used to design a compact motional sensor based on thermal atoms.

arXiv:2003.03491•Physical Review Letters•Mar 6, 2020•15 citations

Theoretical simulation of double resonance phenomenon in ladder-type Rydberg electromagnetically induced transparency

Chao Li, Xinhua Lu, Jing Fan +2 more

Abstract The double resonance phenomenon of electromagnetically induced transparency (EIT) in a ladder-type Rydberg atomic system is theoretically investigated. Based on the cesium 6 S 1 / 2 → 6 P 3 / 2 → n D 5 / 2 transition, we establish a density-matrix model incorporating the Doppler effect and simulate the absorption spectra under counter-propagating laser configurations. The numerical approach is adopted: a two-velocity-group approximation (Lorentzian line-shape superposition). The results show that when the probe detuning Δ p is fixed and nonzero, scanning the coupling laser frequency yields two symmetric transparency peaks separated by δ = 2 ( λ p / λ c ) | Δ p | , in excellent agreement with recent experimental observations. The two-velocity-group approximation is computationally efficient and physically transparent, while the high-precision integration confirms its validity. We also reveal that conventional uniform velocity averaging fails to resolve the narrow EIT peaks due to insufficient sampling, and propose effective numerical strategies. This work provides a reliable theoretical tool for simulating Rydberg EIT spectra and offers insights into Doppler-induced double resonance, which may find applications in laser frequency stabilization and self-calibration of Rydberg atom-based sensors.

Laser Physics Letters•Aug 1, 2026•0 citations

Fast Simulation of Many-Body Rydberg Atomic Systems for Quantum Sensing

Xinyi Y. I. Xu, Guoda Xie, Lei Ying +2 more

Quantum sensing based on Rydberg atoms is an emerging technology for electric-field measurement. Theoretical and numerical studies were generally limited by the many-body effect in atomic ensembles. In this work, we initially derived a many-body dynamic equation by incorporating the Rydberg- Rydberg interaction into the four-level optical Bloch equation. Particularly, we proposed a fast steady-state solution as an alternative to the transient one. As a result, we ingeniously replaced the computationally expensive matrix operations with a linearly iterative process, enabling rapid convergence within few steps while considering the Doppler frequency shift. This approach made it possible to simulate the interaction of 7000 atoms in less than a minute. Based on the many-body model, we investigated the phenomenon of electromagnetically induced transparency (EIT) and Autler- Townes (AT) splitting under varying atomic gas densities; and compared the numerical results with experimental data. The comparison revealed a relatively-low error of 4.59% for the EITAT simulation by the many-body model. Moreover, we found that the linear dynamic range of the quantum sensing shrinks when considering the many-body interaction.

Digest - IEEE Antennas and Propagation Society. International Symposium•Jul 14, 2024•0 citations
Modeling the effect of Doppler broadening due to the thermal atomic motion of Rydberg sensors typically relies on sampling a large velocity class, solving the equations of motion for each velocity, and then averaging the atomic density matrix over that velocity class. This process is inexact, slow, and presents a bottleneck in simulating Rydberg sensors. We present an approach that allows for fast, exact velocity averaging just by solving the equations of motion twice. We find the “propagator” that acts on the zero-velocity solution to generate the velocity-dependent atomic state for all velocities. By averaging this propagator over the Maxwell-Boltzmann velocity distribution of the atoms, we obtain an explicit, analytic formula that generates the averaged atomic state. This method is expected to save memory and time computational resources by one to several orders of magnitude, compared to traditional sampling approaches.
Theoretical modeling of Rydberg atom-based microwave sensors is often limited by the high computational cost of the density matrix formalism (DMF), especially when resolving transient dynamics in Doppler-broadened vapor cells. We introduce an efficient direct time-domain numerical framework based on the Monte Carlo Wave Function (MCWF) method for Doppler-broadened Rydberg-atom simulations. By incorporating the Doppler effect as a stochastic initialization parameter within individual quantum trajectories, our approach naturally captures thermal broadening, thereby avoiding explicit velocity-grid integration in the MCWF calculation. This reformulates the propagation from a density-matrix representation whose state dimension scales quadratically with the number of levels to a trajectory-based wave-function representation with linear state dimension for each propagated trajectory. We demonstrate that this framework achieves nearly one order of magnitude reduction in runtime under comparable AT-splitting extraction accuracy, while maintaining agreement with the DMF results for the considered observables. The method is further applied to representative time-domain signal-recovery scenarios, including baseband symbol recovery for 8-ary amplitude-shift keying (8-ASK) signals. This work provides a scalable tool for designing and optimizing next-generation Rydberg quantum receivers.
We describe a numerical technique and accompanying open-source Python software package called RydIQule. RydIQule uses a directional graph, relying on adjacency matrices and path-finding to generate a Hamiltonian for multi-level atomic systems. RydIQule then constructs semi-classical equations of motion (Bloch equations) into a tensor which can store an entire simulation consisting of varied system parameters. Using this framework, RydIQule returns solutions significantly faster than typical for interpreted programming languages. RydIQule extends beyond the capabilities of currently-available tools, facilitating rapid development in atomic and Rydberg spectroscopy. To demonstrate its utility, we use RydIQule to simulate a Doppler-broadened Rydberg atomic sensor that simultaneously demodulates five rf tones spanning from 1.7 to 116 GHz. Using RydIQule, this simulation can be solved in several hours on a commercial off-the-shelf desktop computer.
Over the past decade, Rydberg atom electric field sensors have been under investigation as potential alternatives or complements to conventional antenna-based receivers for select applications in RF communications, remote sensing, and precision metrology. To understand the potential utility of these devices for various use cases, it is crucial to develop models that accurately predict key performance metrics such as instantaneous bandwidth and dynamic range. However, existing numerical models require solving a large set of coupled differential equations that is computationally intensive and lengthy to solve. We present an analytic approach that can be used to derive an impulse response function that allows up to two orders-of-magnitude reduction in computation time compared to the full time-dependent integration of the equations of motion. This approach can be used to enable rapid assessments of the Rydberg sensor's response to various waveforms.
Traditionally, measuring the center-of-mass (c.m.) velocity of an atomic ensemble relies on measuring the Doppler shift of the absorption spectrum of single atoms in the ensemble. Mapping out the velocity distribution of the ensemble is indispensable when determining the c.m. velocity using this technique. As a result, highly sensitive measurements require preparation of an ensemble with a narrow Doppler width. Here, we use a dispersive measurement of light passing through a moving room temperature atomic vapor cell to determine the velocity of the cell in a single shot with a short-term sensitivity of 5.5 μm s^{-1} Hz^{-1/2}. The dispersion of the medium is enhanced by creating quantum interference through an auxiliary transition for the probe light under electromagnetically induced transparency condition. In contrast to measurement of single atoms, this method is based on the collective motion of atoms and can sense the c.m. velocity of an ensemble without knowing its velocity distribution. Our results improve the previous measurements by 3 orders of magnitude and can be used to design a compact motional sensor based on thermal atoms.
Abstract The double resonance phenomenon of electromagnetically induced transparency (EIT) in a ladder-type Rydberg atomic system is theoretically investigated. Based on the cesium 6 S 1 / 2 → 6 P 3 / 2 → n D 5 / 2 transition, we establish a density-matrix model incorporating the Doppler effect and simulate the absorption spectra under counter-propagating laser configurations. The numerical approach is adopted: a two-velocity-group approximation (Lorentzian line-shape superposition). The results show that when the probe detuning Δ p is fixed and nonzero, scanning the coupling laser frequency yields two symmetric transparency peaks separated by δ = 2 ( λ p / λ c ) | Δ p | , in excellent agreement with recent experimental observations. The two-velocity-group approximation is computationally efficient and physically transparent, while the high-precision integration confirms its validity. We also reveal that conventional uniform velocity averaging fails to resolve the narrow EIT peaks due to insufficient sampling, and propose effective numerical strategies. This work provides a reliable theoretical tool for simulating Rydberg EIT spectra and offers insights into Doppler-induced double resonance, which may find applications in laser frequency stabilization and self-calibration of Rydberg atom-based sensors.
Quantum sensing based on Rydberg atoms is an emerging technology for electric-field measurement. Theoretical and numerical studies were generally limited by the many-body effect in atomic ensembles. In this work, we initially derived a many-body dynamic equation by incorporating the Rydberg- Rydberg interaction into the four-level optical Bloch equation. Particularly, we proposed a fast steady-state solution as an alternative to the transient one. As a result, we ingeniously replaced the computationally expensive matrix operations with a linearly iterative process, enabling rapid convergence within few steps while considering the Doppler frequency shift. This approach made it possible to simulate the interaction of 7000 atoms in less than a minute. Based on the many-body model, we investigated the phenomenon of electromagnetically induced transparency (EIT) and Autler- Townes (AT) splitting under varying atomic gas densities; and compared the numerical results with experimental data. The comparison revealed a relatively-low error of 4.59% for the EITAT simulation by the many-body model. Moreover, we found that the linear dynamic range of the quantum sensing shrinks when considering the many-body interaction.