Optimizing quantum circuits is critical: the number of quantum operations needs to be minimized for a successful evaluation of a circuit on a quantum processor. In this paper we unify two disparate ideas for optimizing quantum circuits, rewrite rules, which are fast standard optimizer passes, and unitary synthesis, which is slow, requiring a search through the space of circuits. We present a clean, unifying framework for thinking of rewriting and resynthesis as abstract circuit transformations. We then present a radically simple algorithm, guoq, for optimizing quantum circuits that exploits the synergies of rewriting and resynthesis. Our extensive evaluation demonstrates the ability of guoq to strongly outperform existing optimizers on a wide range of benchmarks.
Optimizing quantum circuits is critical: the number of quantum operations needs to be minimized for a successful evaluation of a circuit on a quantum processor. In this paper we unify two disparate ideas for optimizing quantum circuits, rewrite rules, which are fast standard optimizer passes, and unitary synthesis, which is slow, requiring a search through the space of circuits. We present a clean, unifying framework for thinking of rewriting and resynthesis as abstract circuit transformations. We then present a radically simple algorithm, guoq, for optimizing quantum circuits that exploits the synergies of rewriting and resynthesis. Our extensive evaluation demonstrates the ability of guoq to strongly outperform existing optimizers on a wide range of benchmarks.
Near-term quantum computers are expected to work in an environment where each operation is noisy, with no error correction. Therefore, quantum-circuit optimizers are applied to minimize the number of noisy operations. Today, physicists are constantly experimenting with novel devices and architectures. For every new physical substrate and for every modification of a quantum computer, we need to modify or rewrite major pieces of the optimizer to run successful experiments. In this paper, we present QUESO, an efficient approach for automatically synthesizing a quantum-circuit optimizer for a given quantum device. For instance, in 1.2 minutes, QUESO can synthesize an optimizer with high-probability correctness guarantees for IBM computers that significantly outperforms leading compilers, such as IBM's Qiskit and TKET, on the majority (85%) of the circuits in a diverse benchmark suite. A number of theoretical and algorithmic insights underlie QUESO: (1) An algebraic approach for representing rewrite rules and their semantics. This facilitates reasoning about complex symbolic rewrite rules that are beyond the scope of existing techniques. (2) A fast approach for probabilistically verifying equivalence of quantum circuits by reducing the problem to a special form of polynomial identity testing . (3) A novel probabilistic data structure, called a polynomial identity filter (PIF), for efficiently synthesizing rewrite rules. (4) A beam-search-based algorithm that efficiently applies the synthesized symbolic rewrite rules to optimize quantum circuits.
Today’s quantum devices are noisy, so reducing circuit size is critical for reliable execution. Existing rule-based optimizers often rely on large rule sets that are difficult to manage and still miss long-distance transformations. We present QSymb, a framework for synthesizing compact and expressive quantum-circuit rewrite rules with formal guarantees. We formalize symbolic rewrite rules in which a symbolic gate represents infinitely many subcircuits. We then define canonical symbolic rules of the form L ; S = S ; R and prove that they constitute a compact generative core from which general symbolic rules can be derived. On top of this formal foundation, given a gate set, QSymb synthesizes (1) a small, non-derivable concrete rule set that is complete up to chosen size and qubit bounds, and (2) a small but expressive canonical symbolic rule set that captures transformations beyond finite or monomial-only patterns. We further present rule anchoring to derive optimization-effective rules from canonical symbolic rules. Together, these results provide both expressiveness and guarantees: soundness of synthesized rules via validation, non-derivability, and bounded completeness. On the IBM-Eagle gate set, QSymb strictly outperforms state-of-the-art rewrite-based optimizers (Qiskit, Guoq, Quartz, TKET, and Queso) in two-qubit-gate reduction on 90%, 67%, 82%, 85%, and 83% of standard quantum algorithm benchmarks, respectively; on Nam gate set, the corresponding rates are 88%, 74%, 81%, 86%, and 82.9%. It achieves final average two-qubit-gate reductions of 27.44% and 29.95%, respectively.
Quantum circuit transformation (QCT), necessary for adapting any quantum circuit to the qubit connectivity constraints of the NISQ device, often introduces numerous additional SWAP gates into the original circuit, increasing the circuit depth and thus reducing the success rate of computation. To minimize the depth of QCT circuits, we propose a Swapping-Sweeping-and-Rewriting optimizer. This optimizer rearranges the circuit based on generalized gate commutation rules via a genetic algorithm, extracts subcircuits consisting of CNOT gates using a circuit sweeping technique, and rewrites each subcircuit with a functionally equivalent and depth-optimal circuit generated by an SAT solver. Experimental results demonstrate that, compared with existing post-QCT optimization approaches such as CBIR and Q-Synth, SSR achieves superior performance, improving circuit depth by up to 29.04% and 16.59% on average across all benchmark circuits, whereas the depth reduction of CBIR and Q-Synth are, respectively, 12.17% and 16.63% at most and 6.45% and -0.53% on average on the same benchmarks.
Quantum unitary synthesis addresses the problem of translating abstract quantum algorithms into sequences of hardware-executable quantum gates. Solving this task exactly is infeasible in general due to the exponential growth of the underlying combinatorial search space. Existing approaches suffer from misaligned optimization objectives, substantial training costs and limited generalization across different qubit counts. We mitigate these limitations by using supervised learning to approximate the minimum description length of residual unitaries and combining this estimate with stochastic beam search to identify near optimal gate sequences. Our method relies on a lightweight model with zero-shot generalization, substantially reducing training overhead compared to prior baselines. Across multiple benchmarks, we achieve faster wall-clock synthesis times while exceeding state-of-the-art methods in terms of success rate for complex circuits.
To implement quantum algorithms on quantum computers it is crucial to decompose their operators into the limited gate set supported by those computers. Unfortunately, existing works automating this essential task are generally slow and only applicable to narrow use cases.We present Synthetiq, a method to synthesize quantum circuits implementing a given specification over arbitrary finite gate sets, which is faster and more versatile than existing works. Synthetiq utilizes Simulated Annealing instantiated with a novel, domain-specific energy function that allows developers to leverage partial specifications for better efficiency. Synthetiq further couples this synthesis method with a custom simplification pass, to ensure efficiency of the found circuits. We experimentally demonstrate that Synthetiq can generate better implementations than were previously known for multiple relevant quantum operators including RCCCX, CCT, CCiSWAP, C√SWAP, and C√iSWAP. Our extensive evaluation also demonstrates Synthetiq frequently outperforms a wide variety of more specialized tools in their own domains, including (i) the well-studied task of synthesizing fully specified operators in the Clifford+T gate set, (ii) є-approximate synthesis of multi-qubit operators in the same gate set, and (iii) synthesis tasks with custom gate sets. On all those tasks, Synthetiq is typically one to two orders of magnitude faster than previous state-of-the-art and can tackle problems that were previously out of the reach of any synthesis tool.
To run an abstract algorithm on a quantum computer, the algorithm must be compiled into a sequence of low-level instructions that can be executed by the processor. The compilation step is crucial because it determines the quantity of resources necessary for the execution of an algorithm. Therefore, the compilation stage must be optimized. In this thesis, we are interested in a brick of compilation: the synthesis of quantum circuits from an abstract specification of an operator.First, we study the case where the unitary matrix of a quantum operator is given to us and we explore the minimization of both quantum resources and classical resources. Even if the simultaneous optimization of these two types of resources seems difficult, we propose better compromises improving the literature.Secondly, we are interested in the class of so-called reversible linear operators. This time we are exclusively interested in the optimization of quantum resources and we improve the state of the art in various cases of quantum metrics (circuit size, circuit depth) and processors (NISQ, fully-connected processors).