Artificially engineered atoms, built using superconducting electrical circuits, have had a broad impact on the field of quantum information and quantum computing. Based on the Josephson effect, superconducting qubits have provided a robust platform for engineering light-matter interactions at the single-photon level. The ability to precisely control and manipulate single photons using superconducting qubits and cavities, a field now popularly known as circuit quantum electrodynamics (circuit QED), has enabled new and novel regimes in quantum physics, which previously remained inaccessible. For instance, the coupling between individual photons and artificial atoms have been shown to reach the ultrastrong and deep-strong regimes, a feat which is difficult to achieve with natural atoms. The superconducting circuit platform is now a promising contender for building large-scale quantum processors, attracting large investments from academic, industry and government players. \n \nThis thesis uses superconducting circuits to engineer photon interactions in two separate studies. The first is aimed at studying the physics of ``giant" artificial-atoms. The second study explores the route towards building a quantum heat engine using two parametrically-coupled, superconducting microwave cavities. We review the theoretical ideas and concepts which motivate our work, along with discussions of the design methodology, simulations, fabrication, measurement setup and the experimental findings. \n \nIn the first study, we explore a giant artificial atom, formed from a transmon qubit, which is coupled to propagating microwaves at multiple points along an open transmission line. The multipoint coupling nature of the transmon allows its radiated field to interfere with itself leading to some striking ``giant" atom effects. For instance, we observe strong frequency dependent couplings of the transmon's transition levels to its electromagnetic environment, a feature which is not observed with ordinary artificial atoms. We measure large on/off ratios, as high as
380, for the coupling rate of the
ket0−ket1 transition. Furthermore, we show that we can enhance or suppress the coupling rate of the
ket1−ket2 transition relative to the
ket0−ket1 transition, by more than a factor of
200. The relative modulation of the coupling rates was exploited to engineer a metastable state in the giant transmon and demonstrate electromagnetically-induced transparency (EIT), a typical signature of a lambda system. Our results show that we can transform the ladder structure of an ordinary transmon into a more interesting lambda system using a giant transmon, thereby paving the way for exploring new possibilities to study three-level physics in a waveguide-QED setting. \n \nExtending giant atom physics to multiple giant atoms, we then explore a device with two giant artificial atoms connected in a braided configuration to a transmission line. The braided topology of the qubits, offers an interesting regime where the qubits can interact with each other in a decoherence-free environment, where the interaction is mediated by virtual photons in the transmission line. We probe the resonant behavior of the qubits at two different frequency bias points, where we observe qualitatively different scattering behavior. Furthermore, when probing for the Autler-Townes Splitting (ATS), multiple resonances are observed for both resonant and off-resonant cases instead of the familiar doublet in the ATS spectroscopy. This comes as a surprise as the frequency-level spacings in both qubits are nominally identical. We believe these features could be an indication of a novel resonant interaction between the qubits facilitated by the braided topology. An effort to understand this theoretically is underway. \n \nFor our second study, we explore a system with two parametrically-coupled superconducting resonators, which implements an optomechanical-like interaction in an all-electrical network. The nonlinear nature of this interaction is mediated by a superconducting quantum interference device (SQUID), where the current in one resonator couples to the photon number in the other resonator. We propose to use this system to build a ``photonic piston" engine in the quantum regime. We motivate the feasibility of the proposal by reviewing key theoretical results which demonstrate an Otto-cycle by appropriately driving the system with noise. Our experimental findings demonstrate the crucial nonlinear coupling that is required for the engine to work. We also show that we can increase the coupling strength between the resonators depending on the chosen flux operating point.
Experiments utilizing quantum optics have progressed rapidly in last few decades, particularly in the context of quantum computation, simulation, and communication. Early work in this field focused on implementations of cavity quantum electrodynamics (QED), where atoms, either natural or artificial, are strongly coupled to the confined photonic modes of cavities. However, in recent years, achieving strong coupling between atoms and itinerant photons has also gained significant interest for its applications in quantum networking. To this end, many atomic platforms are attempting to realize the waveguide QED architecture: atoms that interact with the continua of propagating photonic modes within a waveguide. In this thesis, we realize the strong-coupling regime of a waveguide QED architecture by coupling superconducting artificial atoms, typically operated as qubits, to one-dimensional transmission lines. We first demonstrate that superconducting qubits in a waveguide QED system can be used as high-quality quantum emitters. We then leverage the quantum interference between the simultaneous emission from multiple qubits in order to generate non-classical, spatially entangled, and directional itinerant microwave photons. These types of photons are particularly useful for remote entanglement and quantum communication protocols. Finally, we demonstrate that superconducting qubits can be engineered to enter novel regimes of light-matter interactions that are difficult, or even impossible, to achieve in other atomic platforms. In particular, we realize the giant-atom regime of waveguide QED, where the atom can no longer be treated as a point-like object. We use our giant atoms to implement tunable atom-waveguide couplings, as well as decoherence-free waveguide-mediated interactions between multiple atoms.
Engineering light-matter interactions at the quantum level has been central to the pursuit of quantum optics for decades. Traditionally, this has been done by coupling emitters, typically natural atoms and ions, to quantized electromagnetic fields in optical and microwave cavities. In these systems, the emitter is approximated as an idealized dipole, as its physical size is orders of magnitude smaller than the wavelength of light. Recently, artificial atoms made from superconducting circuits have enabled new frontiers in light-matter coupling, including the study of ``giant'' atoms which cannot be approximated as simple dipoles. Here, we explore an implementation of a giant artificial atom, formed from a transmon qubit coupled to propagating microwaves at multiple points along an open transmission line. The nature of this coupling allows the qubit radiation field to interfere with itself, leading to some striking giant-atom effects. For instance, we observe strong frequency-dependent couplings of the qubit energy levels to the electromagnetic modes of the transmission line. Combined with the ability to in situ tune the qubit energy levels, we show that we can modify the relative coupling rates of multiple qubit transitions by more than an order of magnitude. By doing so, we engineer a metastable excited state, allowing us to operate the giant transmon as an effective lambda system where we clearly demonstrate electromagnetically induced transparency.
Three-qubit gates are highly beneficial operations in quantum computing, enabling compact implementations of quantum algorithms and efficient generation of multipartite entangled states. However, realizing such gates with high fidelity remains challenging due to crosstalk, complex control requirements, and the overhead of parametric or tunable couplers. In this work, we propose and analyze the implementation of fast, high-fidelity three-qubit gates using giant atoms -- artificial atoms coupled to a waveguide at multiple spatially separated points. By leveraging interference effects intrinsic to the giant-atom architecture, we demonstrate that native three-qubit gates, such as the controlled-CZ-SWAP (CCZS) and the dual-iSWAP (DIV), can be realized through simple frequency tuning, without the need for complex pulse shaping or additional hardware. We evaluate gate performance under realistic decoherence and show that fidelities exceeding 99.5% are achievable with current experimental parameters in superconducting circuits. As an application, we present a scalable protocol for preparing three- and five-qubit GHZ states using minimal gate depth, achieving high state fidelity within sub-300ns timescales. Our results position giant-atom systems as a promising platform for entangled-state preparation and low-depth quantum circuit design in near-term quantum computers and quantum simulators.
Abstract Waveguide quantum electrodynamics offers a wide range of possibilities to effectively engineer interactions between artificial atoms via a one-dimensional open waveguide. While these interactions have been experimentally studied in the few qubit limit, the collective properties of such systems for larger arrays of qubits in a metamaterial configuration has so far not been addressed. Here, we experimentally study a metamaterial made of eight superconducting transmon qubits with local frequency control coupled to the mode continuum of a waveguide. By consecutively tuning the qubits to a common resonance frequency we observe the formation of super- and subradiant states, as well as the emergence of a polaritonic bandgap. Making use of the qubits quantum nonlinearity, we demonstrate control over the latter by inducing a transparency window in the bandgap region of the ensemble. The circuit of this work extends experiments with one and two qubits toward a full-blown quantum metamaterial, thus paving the way for large-scale applications in superconducting waveguide quantum electrodynamics.
Scaling up a superconducting quantum computer will likely require quantum communication between remote chips, which can be implemented using an itinerant microwave photon in a transmission line. To realize high-fidelity communication, it is essential to control the frequency and temporal shape of the microwave photon. In this work, we demonstrate the generation of frequency-tunable shaped microwave photons without resorting to any frequency-tunable circuit element. We develop a framework that treats a microwave resonator as a band-pass filter mediating the interaction between a superconducting qubit and the modes in the transmission line. This interpretation allows us to stimulate the photon emission by an off-resonant drive signal. We characterize how the frequency and temporal shape of the generated photon depends on the frequency and amplitude of the drive signal. By modulating the drive amplitude and frequency, we achieve a frequency tunability of 40 MHz while maintaining the photon mode shape time symmetric. Through measurements of the quadrature amplitudes of the emitted photons, we demonstrate a consistently high state and process fidelities around 95% across the tunable frequency range. Our hardware-efficient approach eliminates the need for additional biasing lines typically required for frequency tuning, offering a simplified architecture for scalable quantum communication.