This thesis presents three studies in quantum-enhanced sensing and target detection. The first study explores covert target detection using optical or microwave probes, establishing quantum-mechanical limits on the error probabilities of entanglement-assisted detection methods while maintaining the sender's covertness. It identifies the minimal energy required to preserve covertness and reduce error probabilities, compares two-mode squeezed vacuum probes and coherent states against these limits, and extends the analysis to discriminating thermal loss channels and non-adversarial quantum illumination. The second study focuses on phase-insensitive optical amplifiers, determining the quantum limit on the precision of gain estimation using multimode probes possibly entangled with ancillary systems. It finds that the average photon number and the number of input modes are interchangeable resources for achieving optimal gain sensing precision, contrasting classical probes with quantum probes and highlighting the advantages of the latter, even with single-photon inputs and inefficient photodetection. It also provides a closed-form expression for the energy-constrained Bures distance between two amplifier channels. The third study compares three probe states -- coherent state, two-mode squeezed vacuum (TMSV), and single-photon entangled state (SPES) -- in quantum-enhanced target detection, assessing their performance under signal energy constraints relevant to covert radar sensing. SPES is uniquely positioned as a practical probe due to its non-classical properties after thermal loss and ease of generation. Numerical analysis shows that at low signal energies, the error exponent of TMSV aligns with SPES, indicating comparable detection capabilities and that SPES surpasses the best classical state-the coherent state-in accuracy for certain signal strengths.
This thesis presents three studies in quantum-enhanced sensing and target detection. The first study explores covert target detection using optical or microwave probes, establishing quantum-mechanical limits on the error probabilities of entanglement-assisted detection methods while maintaining the sender's covertness. It identifies the minimal energy required to preserve covertness and reduce error probabilities, compares two-mode squeezed vacuum probes and coherent states against these limits, and extends the analysis to discriminating thermal loss channels and non-adversarial quantum illumination. The second study focuses on phase-insensitive optical amplifiers, determining the quantum limit on the precision of gain estimation using multimode probes possibly entangled with ancillary systems. It finds that the average photon number and the number of input modes are interchangeable resources for achieving optimal gain sensing precision, contrasting classical probes with quantum probes and highlighting the advantages of the latter, even with single-photon inputs and inefficient photodetection. It also provides a closed-form expression for the energy-constrained Bures distance between two amplifier channels. The third study compares three probe states -- coherent state, two-mode squeezed vacuum (TMSV), and single-photon entangled state (SPES) -- in quantum-enhanced target detection, assessing their performance under signal energy constraints relevant to covert radar sensing. SPES is uniquely positioned as a practical probe due to its non-classical properties after thermal loss and ease of generation. Numerical analysis shows that at low signal energies, the error exponent of TMSV aligns with SPES, indicating comparable detection capabilities and that SPES surpasses the best classical state-the coherent state-in accuracy for certain signal strengths.
Quantum-enhanced sensing has a goal of enhancing a parameter sensitivity with input quantum states, while quantum illumination has a goal of enhancing a target detection capability with input entangled states in a heavy noise environment. Here we propose a concatenation between quantum-enhanced sensing and quantum illumination that can take quantum advantage over the classical limit. First, phase sensing in an interferometry is connected to a target sensing via quantum Fisher information. Second, the target sensitivity is investigated in noisy quantum-enhanced sensing. Under the same input state energy, for example, N-photon entangled states can exhibit better performance than a two-mode squeezed vacuum state and a separable coherent state. Incorporating a photon-number difference measurement, finally, the noisy target sensitivity is connected to a signal-to-noise ratio which is associated with a minimum error probability of discriminating the presence and absence of the target. We show that both the target sensitivity and the signal-to-noise ratio can be enhanced with increasing thermal noise.
In covert target detection, Alice attempts to send optical or microwave probes to determine the presence or absence of a weakly reflecting target embedded in thermal background radiation within a target region, while striving to remain undetected by an adversary, Willie, who is co-located with the target and collects all light that does not return to Alice. We formulate this problem in a realistic setting and derive quantum-mechanical limits on Alice's error probability performance in entanglement-assisted target detection for any fixed level of her detectability by Willie. We demonstrate how Alice can approach this performance limit using two-mode squeezed vacuum probes in the regime of small to moderate background brightness, and how such protocols can outperform any conventional approach using Gaussian-distributed coherent states. In addition, we derive a universal performance bound for nonadversarial quantum illumination without requiring the passive-signature assumption.
This thesis studies quantum-enhanced phase change detection using continuous-variable Gaussian states. The main goal is to understand how different probe states and receiver designs affect the detection of a phase change in a noisy optical channel. The phase change problem is written as a quantum state discrimination problem. The pre-change and post-change states are Gaussian states described by displacement vectors and covariance matrices. A thermal-loss channel is used to model optical loss and background noise, and a phase shift is applied to the signal mode. The main quantum benchmark is the quantum relative entropy (QRE) between the post-change and pre-change states. A pure two-mode Gaussian probe is studied in detail. The probe energy is split between squeezing and coherent displacement. This split is controlled by a power allocation ratio ?. By optimizing over ?, the probe can balance quantum correlations and coherent amplitude under a fixed photon-number constraint. Amplified spontaneous emission (ASE), coherent state, and two-mode squeezed vacuum (TMSV) probes are also considered as comparison cases. Practical receiver designs are then studied using classical relative entropy (CRE). The receivers include ideal photon-number-resolving (PNR) detection, finite-resolution PNR detection, a binary single-photon detector (SPD), an ASE receiver, and a homodyne jointdetection receiver. The finite-resolution study distinguishes binary SPD, with outcomes 0 and ? 1, from 1-PNR, with outcomes 0, 1, and ? 2. The receiver-level classical relative entropy is compared with the quantum relative entropy bound to show how much information each receiver keeps after measurement. Finally, the thesis connects these relative entropy results to the cumulative sum (CUSUM) and quantum CUSUM (QUSUM) frameworks for quickest change detection. In this framework, a larger relative entropy means a shorter detection delay for the same false alarm requirement. The results show that both probe design and receiver design are important for quantum-enhanced phase change detection.
Phase-insensitive optical amplifiers uniformly amplify each quadrature of an input field and are of both fundamental and technological importance. We find the quantum limit on the precision of estimating the gain of a quantum-limited phase-insensitive amplifier using a multimode probe that may also be entangled with an ancilla system. In stark contrast to the sensing of loss parameters, the average photon number N and number of input modes M of the probe are found to be equivalent and interchangeable resources for optimal gain sensing. All pure-state probes whose reduced state on the input modes to the amplifier is diagonal in the multimode number basis are proven to be quantum optimal under the same gain-independent measurement. We compare the best precision achievable using classical probes to the performance of an explicit photon-counting-based estimator on quantum probes and show that an advantage exists even for single-photon probes and inefficient photodetection. A closed-form expression for the energy-constrained Bures distance between two product amplifier channels is also derived.
Quantum covert target sensing aims to detect low-reflectivity targets embedded in the thermal environment while avoiding discovery by an adversary. This covertness requirement constrains the admissible probe energy, thereby imposing a trade-off between covertness and sensing performance. However, how this resource constraint determines the ultimate estimation precision of the target parameter remains largely unexplored. To fill this gap, we establish a unified framework connecting covert target discrimination with quantum-enhanced parameter estimation. We first present perturbative ε-covertness-induced bounds on the probe energy, which yield an admissible energy window narrowing as O(ε/M). Moreover, we introduce the covertness-constrained quantum Fisher information (CCQFI) to quantify the ultimate precision of target-reflectivity estimation and assess its attainability with specific measurements. For Gaussian-distributed coherent-state (GCS) and two-mode squeezed vacuum (TMSV) probes, their CCQFIs scale as O(ε) and O(M)+O(εM)+O(ε), respectively. In particular, in the strong covertness regime ε→0, the GCS CCQFI vanishes, whereas the TMSV retains a finite O(M) contribution exhibiting a pronounced metrological advantage. Besides, photon counting saturates the GCS CCQFI, whereas homodyne detection achieves a higher attainability for the TMSV probe. Our work identifies covertness as a quantitative resource constraint governing the metrological limits of quantum target sensing.
There has been a great interest in quantum metrology (e.g., quantum interferometric radar) due to its applications in sub-Rayleigh ranging and remote sensing. Despite interferometric radar has received vast amount of attentions over the past two decades, very few researches has been conducted on another type of quantum radar: quantum illumination radar, or more precisely quantum target detection. It is, in general, used to interrogate whether the low-reflectivity target in a noisy thermal bath is existed using quantum light. The entanglement properties of its emitted light source give it a unique detection advantage over the classical radar. Entangled coherent state (ECS), as a class of quantum states with high entanglement robustness in noisy environments, has been widely used in several fields of quantum science such as quantum informatics, quantum metrology . In this paper, we investigate the target detection performance of quantum illumination radar based on three different types of ECS states. We employ the two-mode squeezed vacuum state (TMSV) and the coherent state as benchmarks to compare and analyze the relationship between the entanglement strength of the three types of ECS states and their quantum illumination detection performance. We found that the detection performance of the three ECS states is better than that of the coherent state. However, it is inferior to that of the TMSV state when the target is of low reflectivity. The emitted photon number is much smaller than the background noise (we call this as “good” illumination conditions). On the contrary, quantum illumination radar has no obvious advantage over coherent state radar for target detection under other illumination conditions; further, the detection performance of these three types of ECS states is not evidently related to that of the TMSV state and the coherent state. Finally, we reveal that the target detection performance of quantum illumination for the first two types of ECS states can be determined by their entanglement strength under “good” illumination conditions by adjusting the inter-modal phase of these two ECS states while keeping the emitted photon number constant. Under other illumination conditions, there is no evidence to demonstrate the entanglement strength of ECS states being associated with their target detection performance.