Phase-insensitive optical amplifiers uniformly amplify each quadrature of an input field and are of both fundamental and technological importance. We find the quantum limit on the precision of estimating the gain of a quantum-limited phase-insensitive amplifier using a multimode probe that may also be entangled with an ancilla system. In stark contrast to the sensing of loss parameters, the average photon number N and number of input modes M of the probe are found to be equivalent and interchangeable resources for optimal gain sensing. All pure-state probes whose reduced state on the input modes to the amplifier is diagonal in the multimode number basis are proven to be quantum optimal under the same gain-independent measurement. We compare the best precision achievable using classical probes to the performance of an explicit photon-counting-based estimator on quantum probes and show that an advantage exists even for single-photon probes and inefficient photodetection. A closed-form expression for the energy-constrained Bures distance between two product amplifier channels is also derived.
Phase-insensitive optical amplifiers uniformly amplify each quadrature of an input field and are of both fundamental and technological importance. We find the quantum limit on the precision of estimating the gain of a quantum-limited phase-insensitive amplifier using a multimode probe that may also be entangled with an ancilla system. In stark contrast to the sensing of loss parameters, the average photon number N and number of input modes M of the probe are found to be equivalent and interchangeable resources for optimal gain sensing. All pure-state probes whose reduced state on the input modes to the amplifier is diagonal in the multimode number basis are proven to be quantum optimal under the same gain-independent measurement. We compare the best precision achievable using classical probes to the performance of an explicit photon-counting-based estimator on quantum probes and show that an advantage exists even for single-photon probes and inefficient photodetection. A closed-form expression for the energy-constrained Bures distance between two product amplifier channels is also derived.
This thesis presents three studies in quantum-enhanced sensing and target detection. The first study explores covert target detection using optical or microwave probes, establishing quantum-mechanical limits on the error probabilities of entanglement-assisted detection methods while maintaining the sender's covertness. It identifies the minimal energy required to preserve covertness and reduce error probabilities, compares two-mode squeezed vacuum probes and coherent states against these limits, and extends the analysis to discriminating thermal loss channels and non-adversarial quantum illumination. The second study focuses on phase-insensitive optical amplifiers, determining the quantum limit on the precision of gain estimation using multimode probes possibly entangled with ancillary systems. It finds that the average photon number and the number of input modes are interchangeable resources for achieving optimal gain sensing precision, contrasting classical probes with quantum probes and highlighting the advantages of the latter, even with single-photon inputs and inefficient photodetection. It also provides a closed-form expression for the energy-constrained Bures distance between two amplifier channels. The third study compares three probe states -- coherent state, two-mode squeezed vacuum (TMSV), and single-photon entangled state (SPES) -- in quantum-enhanced target detection, assessing their performance under signal energy constraints relevant to covert radar sensing. SPES is uniquely positioned as a practical probe due to its non-classical properties after thermal loss and ease of generation. Numerical analysis shows that at low signal energies, the error exponent of TMSV aligns with SPES, indicating comparable detection capabilities and that SPES surpasses the best classical state-the coherent state-in accuracy for certain signal strengths.
We obtain universal (i.e., probe and measurement-independent) performance bounds on ancilla-assisted quantum sensing of multiple parameters of phase-covariant optical channels under energy and mode-number constraints. We first show that for any such constrained problem, an optimal ancilla-entangled probe can always be found whose reduced state on the modes probing the channel is diagonal in the photon-number basis. For parameters that are encoded in single-mode Gaussian channels, we derive a universal upper bound on the quantum Fisher information matrix that delineates the roles played by the energy and mode constraints. We illustrate our results for sensing of the transmittance of a thermal loss channel under both the no-passive-signature and passive-signature paradigms, and in the problem of sensing the noise variance of an additive-noise channel. In both cases, we show that two-mode squeezed vacuum probes are near-optimal under the constraints in the regime of low signal brightness, i.e., per-mode average photon number. More generally, our work sets down a uniform framework for readily evaluating universal limits for any sensing problem involving Gaussian channels.
Distributed quantum sensing leverages quantum correlations among multiple sensors to enhance the precision of parameter estimation beyond classical limits. Most existing approaches target phase estimation and rely on a shared phase reference between the signal and the probe, yet many relevant scenarios deal with regimes where such a reference is absent, making the estimation of force or field amplitudes the main task. We study this phase-insensitive regime for bosonic sensors that undergo identical displacements with common phases randomly varying between experimental runs. We derive analytical bounds on the achievable precision and show that it is determined by first-order normal correlations between modes in the probe state, constrained by their average excitations. These correlations yield a collective sensitivity enhancement over the standard quantum limit, with a gain that grows linearly in the total excitation number, revealing a distributed quantum advantage even without a global phase reference. We identify families of multimode states with definite joint parity that saturate this limit and can be probed efficiently via local parity measurements already demonstrated or emerging in several quantum platforms. We further demonstrate that experimentally relevant decoherence channels favor two distinct sensing strategies: splitting of a single-mode nonclassical state among the modes, which is robust to loss and heating, and separable probes, which are instead resilient to dephasing and phase jitter. Our results are relevant to multimode continuous platforms, including trapped-ion, solid-state mechanical, optomechanical, superconducting, and photonic systems.
Quantum estimation of parameters defining open-system dynamics may be enhanced by using ancillas that are entangled with the probe but are not submitted to the dynamics. Here we consider the important problem of estimation of transmission of light by a sample, with losses due to absorption and scattering. We show, through the determination of the quantum Fisher information, that the ancilla strategy leads to the best possible precision in single-mode estimation—the one obtained for a Fock-state input—through joint photon counting of probe and ancilla, which are modes of a bimodal squeezed state produced by an optical parametric amplifier. This proposal overcomes the challenge of producing and detecting high-photon-number Fock states, and it is quite robust in the presence of additional noise: We show that it is immune to phase noise and the precision does not change if the incoming state gets disentangled. Furthermore, the quantum gain is still present under moderate photon losses of the input beams. We also discuss an alternative to joint photon counting, which is readily implementable with present technology and approaches the quantum Fisher information result for weak absorption, even with moderate photon losses of the input beams before the sample is probed: a time-reversal procedure, placing the sample between two optical parametric amplifiers, with the second undoing the squeezing produced by the first one. The precision of estimation of the loss parameter is obtained from the average outgoing total photon number and its variance. In both procedures, the state of the probe and the detection procedure are independent of the value of the parameter. Published by the American Physical Society 2024
Phase-insensitive amplifiers (PIAs), as a class of important quantum devices, have found significant applications in the subtle manipulation of multiple quantum correlation and multipartite quantum entanglement. Gain is a very important parameter for quantifying the performance of a PIA. Its absolute value can be defined as the ratio of the output light beam power to the input light beam power, while its estimation precision has not been extensively investigated yet. Therefore, in this work, we theoretically study the estimation precision from the vacuum two-mode squeezed state (TMSS), the estimation precision of the coherent state, and the bright TMSS scenario, which has the following two advantages: it has more probe photons than the vacuum TMSS and higher estimation precision than the coherent state. The advantage in terms of estimation precision of the bright TMSS compared with the coherent state is researched. We first simulate the effect of noise from another PIA with gain M on the estimation precision of the bright TMSS, and we find that a scheme in which the PIA is placed in the auxiliary light beam path is more robust than two other schemes. Then, a fictitious beam splitter with transmission T is used to simulate the noise effects of propagation loss and imperfect detection, and the results show that a scheme in which the fictitious beam splitter is placed before the original PIA in the probe light beam path is the most robust. Finally, optimal intensity difference measurement is confirmed to be an accessible experimental technique to saturate estimation precision of the bright TMSS. Therefore, our present study opens a new avenue for quantum metrology based on PIAs.
Quantum mode parameter estimation determines parameters governing the shape of electromagnetic modes occupied by a quantum state of radiation. Canonical examples, time delays and frequency shifts, underpin radar, lidar, and optical clocks. A comprehensive framework recently established that broad families of quantum states can attain the Heisenberg limit, surpassing any classical strategy. This raises a fundamental question: among all quantum-enhanced strategies, which is truly optimal? Answering this requires identifying physically meaningful resources governing each estimation task, so quantum states can be compared on equal footing. We show these resources are connected to the eigenmode basis of the generator of the relevant mode transformation. For time-shift estimation, whose generator is diagonal in the frequency domain, the pertinent resources are the mean frequency and bandwidth; analogous quantities emerge for other transformations. Our framework unifies two historically separate perspectives: the particle-number aspect and the mode-structure of quantum light, providing a coherent picture of quantum-enhanced sensing with multimode radiation. Within this unified framework, we derive a tight upper bound on the quantum Fisher information for multimode Gaussian states, expressed in terms of these natural resources, and analytically identify the optimal Gaussian states saturating it. These optimal states take a particularly transparent form in the generator eigenbasis, a structural simplicity reflecting the deep connection between the geometry of the mode transformation and the architecture of the optimal probe. We further demonstrate that multimode homodyne detection constitutes the optimal measurement, achieving this bound and completing the end-to-end characterization of optimal quantum metrology strategies for mode parameter estimation.