Microwave-optical quantum transduction is a key enabling technology in quantum networking, but has been plagued by a formidable technical challenge. As most microwave-optical-transduction techniques rely on three-wave mixing processes, the processes consume photons from a driving telecom-band (pump) laser to convert input microwave photons into telecom-band photons detuned from the laser by this microwave frequency. However, cleanly separating out single photons detuned only a few GHz away from a classically bright laser in the same spatial mode requires frequency filters of unprecedented extinction over a very narrow transition band, straining the capabilities of today's technology. Instead of confronting this challenge directly, we show how one may achieve the same transduction objective with comparable efficiency using a four-wave mixing process in which of pump photons are consumed to produce transduced optical photons widely separated in frequency from the pump. We develop this process by considering higher-order analogues of photoelasticity and electrostriction than those used in conventional optomechanics, and examine how the efficiency of this process can be made to exceed conventional optomechanical couplings.
Microwave-optical quantum transduction is a key enabling technology in quantum networking, but has been plagued by a formidable technical challenge. As most microwave-optical-transduction techniques rely on three-wave mixing processes, the processes consume photons from a driving telecom-band (pump) laser to convert input microwave photons into telecom-band photons detuned from the laser by this microwave frequency. However, cleanly separating out single photons detuned only a few GHz away from a classically bright laser in the same spatial mode requires frequency filters of unprecedented extinction over a very narrow transition band, straining the capabilities of today's technology. Instead of confronting this challenge directly, we show how one may achieve the same transduction objective with comparable efficiency using a four-wave mixing process in which of pump photons are consumed to produce transduced optical photons widely separated in frequency from the pump. We develop this process by considering higher-order analogues of photoelasticity and electrostriction than those used in conventional optomechanics, and examine how the efficiency of this process can be made to exceed conventional optomechanical couplings.
Two-way microwave-optical quantum transduction is essential to connecting distant superconducting qubits via optical fiber and to enable quantum networking at a large scale. In Blésin, Tian, Bhave, and Kippenberg's article [], they lay out a two-way quantum transducer converting between microwave photons and telecom-band photons by way of an intermediary gigahertz-band phonon mode utilizing piezoelectric and optomechanical interactions respectively (and are the first to work out the quantum piezoelectric coupling). In this work, we examine both the piezoelectric, and optomechanical interactions from first principles, and together with the evanescent coupling between optical modes, discuss what parameters matter most in optimizing this kind of quantum transducer. For its additional utility, we have also compiled a table of relevant properties of optical materials that may be used as elements in transducers.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise N. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO3, and AlN-on-Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing N, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
Microwave-to-optical transducers facilitate the distributed quantum network by combining the high-speed information-processing abilities of superconducting circuits with the long-distance, low-loss transmitting capabilities of optical photons. Besides core metrics such as high efficiency, low noise, and wide bandwidth, practical and scalable transducers also demand a compact footprint and frequency tunability. In this work, we propose an integrated and tunable transducer that combines a coplanar waveguide microwave resonator with a magno-optomechanical microcavity via flip-chip bonding. Benefiting from the broad frequency tunability of the magnon mode, the working frequency range can be tuned over several gigahertz. Through optimization of the geometry and pump powers, our design achieves a theoretical microwave-to-optical photon conversion efficiency exceeding 50% using experimentally achievable parameters, alongside a bandwidth greater than 10 kHz. An added noise near the quantum limit $(\ensuremath{\sim}1)$ is achievable at 10 mK using lower pump powers at the cost of conversion efficiency or a pulsed-pump protocol. By merging compact integration with wide frequency tunability, this platform offers a promising pathway toward scalable quantum networks.
The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.
A quantum transducer converts an input signal to an output probe at a distant frequency band while maintaining the quantum information with high fidelity, which is crucial for quantum networking and distributed quantum sensing and computing. In terms of microwave–optical quantum transduction, the state-of-the-art quantum transducers suffer low transduction efficiency from weak nonlinear coupling, wherein increasing pump power to enhance efficiency inevitably leads to thermal noise from heating. Moreover, we reveal that the efficiency-bandwidth product of a cavity electro-optical or electro-optomechanical transducer is fundamentally limited by pump power and nonlinear coupling coefficient, irrespective of cavity engineering efforts. To overcome this fundamental limit, we propose to noiselessly boost the transduction efficiency by consuming intraband entanglement (e.g., microwave–microwave or optical–optical entanglement in the case of microwave–optical transduction). Via a squeezer–coupler–antisqueezer sandwich structure, the protocol enhances the transduction efficiency to unity in the ideal lossless case, given an arbitrarily weak pump and nonlinear coupling. In practical cavity systems, our entanglement-assisted protocol surpasses the non-assisted fundamental limit of the efficiency-bandwidth product and reduces the threshold cooperativity for positive quantum capacity by a factor proportional to two-mode squeezing gain. Given a fixed cooperativity, our approach increases the broadband quantum capacity by orders of magnitude. The entanglement-assisted advantage is robust to ancilla loss and cavity detuning.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.