Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.16869 · Journal of Applied Physics

Josephson traveling wave parametric amplifiers with plasma oscillation phase matching

Emil Rizvanov, Samuel Kern, P. Neilinger, M. Grajcar

Published Nov 6, 2024• 4 citations
arXivHTMLPDF

Abstract

High gain and large bandwidth of traveling-wave parametric amplifier exploiting the nonlinearity of Josephson Junctions can be achieved by fulfilling the so-called phase-matching condition. This condition is usually addressed by placing resonant structures along the waveguide or by periodic modulations of its parameters, creating gaps in the waveguide’s dispersion. Here, we propose to employ the Josephson junctions, which constitute the centerline of the amplifier, as resonant elements for phase matching. By numerical simulations in JoSIM (and WRspice) software, we show that Josephson plasma oscillations can be utilized to create wave vector mismatch sufficient for phase matching as well as to prevent the conversion of the pump energy to higher harmonics. The proposed traveling wave parametric amplifier design has a gain of 15 dB and a 3 GHz bandwidth, which is comparable to the state-of-the-art TWPAs.

DOI
10.1063/5.0236927

Related papers

Resonant Phase Matching of Josephson Junction Traveling Wave Parametric Amplifiers

Kevin P. O’Brien, Chris Macklin, Irfan A. Siddiqi +1 more

We propose a technique to overcome phase mismatch in Josephson-junction traveling wave parametric amplifiers in order to achieve high gain over a broad bandwidth. Using "resonant phase matching," we design a compact superconducting device consisting of a transmission line with subwavelength resonant inclusions that simultaneously achieves a gain of 20 dB, an instantaneous bandwidth of 3 GHz, and a saturation power of -98 dBm. Such an amplifier is well suited to cryogenic broadband microwave measurements such as the multiplexed readout of quantum coherent circuits based on superconducting, semiconducting, or nanomechanical elements, as well as traditional astronomical detectors.

arXiv:1406.2346•Physical Review Letters•Oct 6, 2014•193 citations

Third harmonic-mediated amplification in TWPA

Emil Rizvanov, Samuel Kern, P. Neilinger +1 more

In Josephson traveling-wave parametric amplifiers, higher-order harmonics of the pump tone and its sidebands are commonly present and typically regarded as parasitic. Consequently, most design efforts have focused on suppressing these harmonics. In spite of that, motivated by transient simulations, we extend the coupled-mode theory and demonstrate that the third harmonic can enhance amplifier performance, improving both gain and bandwidth. We show that the recently developed plasma oscillation-based amplifier is particularly well-suited for exploiting this effect. Its dispersion relation enables us to observe the phenomenon in transient numerical simulations using JoSIM and WRspice. These simulations reveal the improvement of the amplifier’s performance, specifically doubling the bandwidth and increasing the gain.

arXiv:2508.05295•Journal of Applied Physics•Feb 18, 2026•0 citations

Traveling wave parametric amplifier with Josephson junctions using minimal resonator phase matching

T. White, J. Mutus, I.-C. Hoi +18 more

Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance, while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted λ/4 resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12 dB across a 4 GHz span, along with an average saturation power of −92 dBm with noise approaching the quantum limit.

arXiv:1503.04364•Applied Physics Letters•Jun 15, 2015•176 citations

Design of a uniplanar resonance phase-matched Josephson traveling-wave parametric amplifier

Boon-Kok Tan, G. Yassin

In this paper, we present the design of a resonance phase-matched Josephson travelling-wave parametric amplifier that have a 12 GHz 3 dB-bandwidth centred near 10 GHz. Our design utilises a unilateral planar circuit structure which requires only a single layer of thin superconductor film deposited on a supporting substrate to reduce the fabrication complexity. The nonlinear medium of the device is provided by a series of Josephson junctions embedded in a coplanar waveguide with integrated shunt capacitor, and the dispersion of the transmission line is controlled by quarter wavelength resonators coupled capacitively to the feedline. Here, we describe in detail the electromagnetic designs of the various components of the amplifier, and the coupled-mode equations model that governs the three-wave mixing process. We extract the required circuit parameters of the amplifier through electromagnetic modelling, and determine the parametric gain-bandwidth product of the amplifier using an analytical model. Finally, we discuss the various design aspects that affect the overall performance of the amplifier.

UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT)•Sep 1, 2017•3 citations

Resonant Phase Matching of Josephson Junction Traveling Wave Parametric Amplifiers

Kevin P. O’Brien, Chris Macklin, Irfan A. Siddiqi +1 more

We propose a technique to phase-match Josephson-junction traveling wave parametric amplifiers to achieve high gain (over twenty decibels) over a broad bandwidth (multiple GHz) for applications such as the multiplexed readout of quantum coherent circuits.

Nonlinear Optics•Jan 1, 2015•1 citation

Josephson traveling-wave parametric amplifier with inverse Kerr phase matching

M. T. Bell

Superconducting traveling-wave parametric amplifiers (TWPA) have emerged as highly versatile devices, offering broadband amplification with quantum-limited noise performance. They hold significant potential for addressing the readout bottleneck in prototype quantum computers, enabling scalability. Key challenges with this technology include achieving sufficient gain with minimal gain ripple while maintaining low noise performance. Efficient phase matching between a weak signal and a strong pump over the entire length of the TWPA is critical to overcoming these challenges. We present an experimental demonstration of the inverse Kerr phase matching technique in a TWPA, first proposed in Ref. Phys. Rev. Appl. 4, 024014. This method addresses several limitations of conventional dispersion engineering approaches of phase matching in the four-wave mixing parametric process in TWPAs. Most notably the existence of an unusable region of gain near the pump frequency which typically corresponds to the region of most optimal phase matching and maximum gain. The inverse Kerr phase matching approach, allows for greater frequency separation between the region of optimal gain and pump, \textit{in situ} tunability of the pump, minimal gain ripple, and a compact footprint which reduces losses. A TWPA employing the inverse Kerr phase matching technique experimentally demonstrated 20 dB of gain over a 3 GHz instantaneous bandwidth, with a tunable bandwidth of 8 GHz, minimal gain ripple, and near quantum-limited noise performance, with 1.5 photons of added noise.

arXiv:2507.17039•Physical Review Applied•Dec 23, 2025•1 citation
High gain and large bandwidth of traveling-wave parametric amplifier exploiting the nonlinearity of Josephson Junctions can be achieved by fulfilling the so-called phase-matching condition. This condition is usually addressed by placing resonant structures along the waveguide or by periodic modulations of its parameters, creating gaps in the waveguide’s dispersion. Here, we propose to employ the Josephson junctions, which constitute the centerline of the amplifier, as resonant elements for phase matching. By numerical simulations in JoSIM (and WRspice) software, we show that Josephson plasma oscillations can be utilized to create wave vector mismatch sufficient for phase matching as well as to prevent the conversion of the pump energy to higher harmonics. The proposed traveling wave parametric amplifier design has a gain of 15 dB and a 3 GHz bandwidth, which is comparable to the state-of-the-art TWPAs.
We propose a technique to overcome phase mismatch in Josephson-junction traveling wave parametric amplifiers in order to achieve high gain over a broad bandwidth. Using "resonant phase matching," we design a compact superconducting device consisting of a transmission line with subwavelength resonant inclusions that simultaneously achieves a gain of 20 dB, an instantaneous bandwidth of 3 GHz, and a saturation power of -98 dBm. Such an amplifier is well suited to cryogenic broadband microwave measurements such as the multiplexed readout of quantum coherent circuits based on superconducting, semiconducting, or nanomechanical elements, as well as traditional astronomical detectors.
In Josephson traveling-wave parametric amplifiers, higher-order harmonics of the pump tone and its sidebands are commonly present and typically regarded as parasitic. Consequently, most design efforts have focused on suppressing these harmonics. In spite of that, motivated by transient simulations, we extend the coupled-mode theory and demonstrate that the third harmonic can enhance amplifier performance, improving both gain and bandwidth. We show that the recently developed plasma oscillation-based amplifier is particularly well-suited for exploiting this effect. Its dispersion relation enables us to observe the phenomenon in transient numerical simulations using JoSIM and WRspice. These simulations reveal the improvement of the amplifier’s performance, specifically doubling the bandwidth and increasing the gain.
Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance, while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted λ/4 resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12 dB across a 4 GHz span, along with an average saturation power of −92 dBm with noise approaching the quantum limit.
In this paper, we present the design of a resonance phase-matched Josephson travelling-wave parametric amplifier that have a 12 GHz 3 dB-bandwidth centred near 10 GHz. Our design utilises a unilateral planar circuit structure which requires only a single layer of thin superconductor film deposited on a supporting substrate to reduce the fabrication complexity. The nonlinear medium of the device is provided by a series of Josephson junctions embedded in a coplanar waveguide with integrated shunt capacitor, and the dispersion of the transmission line is controlled by quarter wavelength resonators coupled capacitively to the feedline. Here, we describe in detail the electromagnetic designs of the various components of the amplifier, and the coupled-mode equations model that governs the three-wave mixing process. We extract the required circuit parameters of the amplifier through electromagnetic modelling, and determine the parametric gain-bandwidth product of the amplifier using an analytical model. Finally, we discuss the various design aspects that affect the overall performance of the amplifier.
Superconducting traveling-wave parametric amplifiers (TWPA) have emerged as highly versatile devices, offering broadband amplification with quantum-limited noise performance. They hold significant potential for addressing the readout bottleneck in prototype quantum computers, enabling scalability. Key challenges with this technology include achieving sufficient gain with minimal gain ripple while maintaining low noise performance. Efficient phase matching between a weak signal and a strong pump over the entire length of the TWPA is critical to overcoming these challenges. We present an experimental demonstration of the inverse Kerr phase matching technique in a TWPA, first proposed in Ref. Phys. Rev. Appl. 4, 024014. This method addresses several limitations of conventional dispersion engineering approaches of phase matching in the four-wave mixing parametric process in TWPAs. Most notably the existence of an unusable region of gain near the pump frequency which typically corresponds to the region of most optimal phase matching and maximum gain. The inverse Kerr phase matching approach, allows for greater frequency separation between the region of optimal gain and pump, \textit{in situ} tunability of the pump, minimal gain ripple, and a compact footprint which reduces losses. A TWPA employing the inverse Kerr phase matching technique experimentally demonstrated 20 dB of gain over a 3 GHz instantaneous bandwidth, with a tunable bandwidth of 8 GHz, minimal gain ripple, and near quantum-limited noise performance, with 1.5 photons of added noise.