A quantum system with a tunable bath temperature provides an additional degree of freedom for quantum simulators. Such a system can be realized by parametrically modulating the coupling between the system and the bath. Here, by coupling a transmon qubit to a lossy superconducting nonlinear asymmetric inductive element (SNAIL) mode, we experimentally create a tunable bath for the qubit mode. The effective temperature of this bath can be precisely controlled, ranging from negative to positive values. We show that the qubit can be thermalized to equilibrium with different population distributions under different parametric pumping conditions. We further extend our method to the third level of the transmon, demonstrating its potential utility beyond the two-level case. Our results provide a useful tool that can be readily integrated with quantum simulators that would benefit from a nontrivial photon population distribution.
A quantum system with a tunable bath temperature provides an additional degree of freedom for quantum simulators. Such a system can be realized by parametrically modulating the coupling between the system and the bath. Here, by coupling a transmon qubit to a lossy superconducting nonlinear asymmetric inductive element (SNAIL) mode, we experimentally create a tunable bath for the qubit mode. The effective temperature of this bath can be precisely controlled, ranging from negative to positive values. We show that the qubit can be thermalized to equilibrium with different population distributions under different parametric pumping conditions. We further extend our method to the third level of the transmon, demonstrating its potential utility beyond the two-level case. Our results provide a useful tool that can be readily integrated with quantum simulators that would benefit from a nontrivial photon population distribution.
Three-wave mixing is a key process in superconducting quantum information processing, being involved in quantum-limited amplification and parametric coupling between superconducting cavities. These operations can be implemented by superconducting nonlinear asymmetric inductive element (SNAIL)-based devices that present a Kerr-free flux-bias point where unwanted parasitic effects, such as Stark shift, are suppressed. However, with a single flux-bias parameter, these circuits can only host one Kerr-free point, limiting the range of their applications. In this Letter, we demonstrate how to overcome this constraint by introducing the gradiometric SNAIL, a doubly flux biased superconducting circuit in which both effective inductance and Kerr coefficient can be independently tuned. Experimental data show the capability of the gradiometric SNAIL to suppress the Kerr effect in a three-wave mixing parametric amplifier over a continuum of flux bias points corresponding to a 1.7 GHz range of operating frequencies.
Quantum computers have huge potential applications, but do not currently exist. It has already been proven that a quantum computer would outperform the best classical supercomputers in certain problems, some of which have vital connections with our daily lives. For example, quantum computers efficiently solve the prime number factoring problem, which in turn is the foundation of the RSA algorithm behind most online transactions. There is a great deal of current effort to implement quantum computers, and we have seen good progress in platforms including superconducting circuits, ion traps, and photons in cavity QED systems and spins in semiconductors. These machines include up to roughly 50 quantum bits at present, but they are not very useful as quantum errors quickly decohere the computer's state and prevent computation. These errors can be mitigated via quantum error correction at the cost of additional size and complexity. Progress in the field towards error corrected, large-scale quantum machines requires us to require new tools for controlling, coupling, and reading out qubits. In this thesis, I will focus on such explorations in superconducting circuits. In this thesis, we seek to expand the already flexible toolkit of quantum circuits by exploring the uses of parametric couplings based on third-order nonlinearities. This type of nonlinearities has only been used in quantum-limited amplifiers before, here we try to further explore their applications by creating new methods for controlling and measuring qubits that based on it. In the first experiment, we address the problem of implementing a highly efficient quantum non-demolition qubit readout. With the use of two-mode squeezed (TMS) light and combined with phase-preserving parametric amplifiers into an interferometer for dispersive qubit readout, we demonstrate a measurement scheme with a 44% improvement in power signal-to-noise ratio. We also investigate the back-action of the measurement scheme. In the second experiment, we create an effective chemical potential for photons with parametric system-bath coupling. In particular, we use a lossy Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) as both the bath and coupler. The bath engineering is realized by combining the multiple parametric drives and the dissipation together.
We report on the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stopband at the second harmonic of the pump and suppress the propagation of the higher harmonics that otherwise degrade the amplification. With a chain of 440 SNAILs, the amplifier provides up to 20 dB gain and a 3-dB bandwidth of 1 GHz. The added noise by the amplifier is found to be less than one photon.
The ability to efficiently simulate a variety of interacting quantum systems on a single device is an overarching goal for digital and analog quantum simulators. In circuit quantum electrodynamical systems, strongly nonlinear superconducting oscillators are typically realized using transmon qubits, featuring a wide range of tunable couplings that are mainly achieved via flux-dependent inductive elements. Such controllability is highly desirable both for digital quantum information processing and for analog quantum simulations of various physical phenomena, such as arbitrary spin-spin interactions. Furthermore, broad tunability facilitates the study of driven-dissipative oscillator dynamics in previously unexplored parameter regimes. In this work, we demonstrate the ability to selectively activate different dynamical regimes between two strongly nonlinear oscillators using parametric modulation. In particular, our scheme enables access to regimes that are dominated by photon-hopping, two-mode squeezing, or cross-Kerr interactions. Finally, we observe level repulsion and attraction between Kerr-nonlinear oscillators in regimes where the nonlinearities exceed the coupling strengths and decay rates of the system. Our results could be used for realizing purely analog quantum simulators to study arbitrary spin systems as well as for exploring strongly nonlinear oscillator dynamics in previously unexplored interaction regimes.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.
Continuous-variable quantum information processing with mechanical oscillators requires a uni- versal gate set, including a genuine non-Gaussian evolution. While circuit quantum acoustodynamics (cQAD) experiments have realized bilinear and quartic (four-wave mixing) operations by coupling mechanical modes to transmon qubits, the intrinsic Kerr nonlinearity of these devices precludes access to odd-order effective Hamiltonians such as trisqueezing. Here we propose a cQAD architec- ture in which a mechanical mode, hosted in a high-overtone bulk acoustic-wave resonator (HBAR), is coupled to a superconducting nonlinear asymmetric inductive element (SNAIL). By combining the cubic nonlinearity of the SNAIL with parametric flux driving, we engineer a three-wave mixing interaction that generates trisqueezed mechanical states, producing the characteristic triangular, star-shaped Wigner function with negative regions indicative of non-Gaussianity. We derive the effective trisqueezing Hamiltonian from the full circuit model, identify the drive frequencies and flux modulation required to isolate the desired interaction from competing terms, and quantify the achievable coupling strengths for parameters compatible with current fabrication capabilities. Our results establish a hardware-efficient route to non-Gaussian resource generation in mechanical quantum systems, extending the toolbox of cQAD toward universal continuous-variable quantum computation and enhanced quantum-limited sensing.