Quantum computers have huge potential applications, but do not currently exist. It has already been proven that a quantum computer would outperform the best classical supercomputers in certain problems, some of which have vital connections with our daily lives. For example, quantum computers efficiently solve the prime number factoring problem, which in turn is the foundation of the RSA algorithm behind most online transactions. There is a great deal of current effort to implement quantum computers, and we have seen good progress in platforms including superconducting circuits, ion traps, and photons in cavity QED systems and spins in semiconductors. These machines include up to roughly 50 quantum bits at present, but they are not very useful as quantum errors quickly decohere the computer's state and prevent computation. These errors can be mitigated via quantum error correction at the cost of additional size and complexity. Progress in the field towards error corrected, large-scale quantum machines requires us to require new tools for controlling, coupling, and reading out qubits. In this thesis, I will focus on such explorations in superconducting circuits. In this thesis, we seek to expand the already flexible toolkit of quantum circuits by exploring the uses of parametric couplings based on third-order nonlinearities. This type of nonlinearities has only been used in quantum-limited amplifiers before, here we try to further explore their applications by creating new methods for controlling and measuring qubits that based on it. In the first experiment, we address the problem of implementing a highly efficient quantum non-demolition qubit readout. With the use of two-mode squeezed (TMS) light and combined with phase-preserving parametric amplifiers into an interferometer for dispersive qubit readout, we demonstrate a measurement scheme with a 44$\%$ improvement in power signal-to-noise ratio. We also investigate the back-action of the measurement scheme. In the second experiment, we create an effective chemical potential for photons with parametric system-bath coupling. In particular, we use a lossy Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) as both the bath and coupler. The bath engineering is realized by combining the multiple parametric drives and the dissipation together.
Quantum computers have huge potential applications, but do not currently exist. It has already been proven that a quantum computer would outperform the best classical supercomputers in certain problems, some of which have vital connections with our daily lives. For example, quantum computers efficiently solve the prime number factoring problem, which in turn is the foundation of the RSA algorithm behind most online transactions. There is a great deal of current effort to implement quantum computers, and we have seen good progress in platforms including superconducting circuits, ion traps, and photons in cavity QED systems and spins in semiconductors. These machines include up to roughly 50 quantum bits at present, but they are not very useful as quantum errors quickly decohere the computer's state and prevent computation. These errors can be mitigated via quantum error correction at the cost of additional size and complexity. Progress in the field towards error corrected, large-scale quantum machines requires us to require new tools for controlling, coupling, and reading out qubits. In this thesis, I will focus on such explorations in superconducting circuits. In this thesis, we seek to expand the already flexible toolkit of quantum circuits by exploring the uses of parametric couplings based on third-order nonlinearities. This type of nonlinearities has only been used in quantum-limited amplifiers before, here we try to further explore their applications by creating new methods for controlling and measuring qubits that based on it. In the first experiment, we address the problem of implementing a highly efficient quantum non-demolition qubit readout. With the use of two-mode squeezed (TMS) light and combined with phase-preserving parametric amplifiers into an interferometer for dispersive qubit readout, we demonstrate a measurement scheme with a 44% improvement in power signal-to-noise ratio. We also investigate the back-action of the measurement scheme. In the second experiment, we create an effective chemical potential for photons with parametric system-bath coupling. In particular, we use a lossy Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL) as both the bath and coupler. The bath engineering is realized by combining the multiple parametric drives and the dissipation together.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.
Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a 99.6% quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.
This thesis explores novel strategies for advancing superconducting quantum computing through a series of experimental investigations and device innovations. Grounded in the development of circuit quantum electrodynamics, the work addresses the challenges posed by the limitations of coherent control, coherence time and scaling of superconducting qubits. Focusing on transmon qubits, the thesis first reviews the foundational principles of circuit quantum electrodynamics and the critical role of the transmon in achieving robust qubit performance. Three experimental studies form the core of this work. The first study demonstrates a universal quantum gate set for strongly coupled transmons. By exploiting the residual ZZ interaction, the work introduces a novel two-axis gate protocol for single-qubit operations and implements both CZ and CNOT gates with high fidelities, highlighting the potential for fast, low-error quantum operations in the strong coupling regime. The second study investigates a dual-rail qubit architecture using parametrically coupled transmons, showcasing a hardware-efficient approach to quantum error correction. This experiment converts single-photon loss errors into detectable erasures and leverages mid-circuit detection to enhance qubit coherence, thereby advancing fault-tolerant quantum computing schemes in the NISQ era. The final study focuses on the development of merged-element transmons (MET) and their FinMET variants. By integrating the Josephson junction and shunt capacitor into a single trilayer device, these innovations achieve a dramatic reduction in device footprint while addressing loss channels through advanced materials engineering, ultimately paving the way for scalable, high-coherence quantum circuits. Collectively, these contributions demonstrate significant progress in quantum gate design, error mitigation, and qubit architecture, offering promising routes toward the realization of largescale, fault-tolerant quantum computers
After years of academic development, the circuit quantum electrodynamics is entering the age of applications. This thesis was realized in this context of creating tools to bridge the gap between an astounding academic quantum system, superconducting circuits, and a grand goal, the universal quantum computer. A likely blueprint for quantum processors consists in the assembly of a large number of elementary modules arranged in a network.In this experimental thesis, a possible node for such a network, the quantum node, was developed and fabricated using state-of-the-art techniques for 2D superconducting microwave circuits. This node was first used to implement a novel sequential readout method for a superconducting qubit. This experiment, first proposed in 2013 by Sete et al., potentially allows for faster, more accurate read out of superconducting qubits. The read out of qubits is one of the several bottlenecks limiting the development of fault-tolerant superconducting quantum computers, which made this project both useful as a demonstration of the quantum node and for applications. This novel readout method achieves readout performances close to state-of-the-art of superconducting qubit readout even though the chip was not optimized for that purpose.During this work, we also contributed to two other experiments engineering quantum measurement and dissipation with superconducting circuits. First, a dedicated circuit was developed to demonstrate a new form of quantum measurement: the multiplexed photon number measurement. In that experiment led by A. Essig and Q. Ficheux, a superconducting transmon quantum bit is read out at multiple frequencies simultaneously to extract more than one bit of information about the number of photons contained in a microwave resonator coupled to that quantum bit.Second, we contributed to the experimental demonstration of the exponential suppression of bit-flips in a qubit encoded in a Schrödinger Cat state of a microwave mode. This experiment led by R. Lescanne and Z. Leghtas, demonstrates the improvement by a factor 300 of the lifetime of a qubit thanks to the autonomous error correction realized through the engineering of the dissipation of a microwave mode.
Superconducting quantum circuits are a promising approach for realizations of large scale quantum information processing and quantum simulations. The Josephson junction, which forms the basis of superconducting circuits, is the only known nonlinear non-dissipative circuit element, and its inherent nonlinearities have found many different applications. In this thesis I discuss specific implementations of these circuits. I show that strong two-photon nonlinearities can be induced by coupling photons in the microwave domain to Josephson nonlinearities. I then propose a method to simulate a parent Hamiltonian that can potentially be used to observe fractional quantum Hall states of light. I will also explore how superconducting circuits can be used to modify system-bath couplings to emulate a chemical potential for photons. Finally, I consider the limitations of devising a scheme to couple superconducting circuits to trapped ions, and consider the challenges for such hybrid approaches.
Quantum computing promises exponential advantages for simulating quantum systems and solving certain computational problems beyond the reach of classical computers, but the fragility of qubits and the resulting errors present a major challenge for scalable implementations. One promising approach is to engineer qubits whose physical noise processes are intrinsically biased, enabling more efficient quantum error correction. This dissertation investigates quantum computing with superconducting Kerr-cat qubits, a bosonic qubit architecture in which qubit states are encoded in coherent states of a nonlinear oscillator stabilized by a two-photon drive. This stabilization creates an effective double-well pseudo-potential that strongly suppresses bit-flip errors while enabling universal quantum control, leading to a noise-biased qubit. A superconducting device architecture based on SNAIL nonlinear oscillators is developed to realize Kerr-cat qubits with tunable parameters and high coherence, integrating readout resonators, dedicated filters, and microwave control lines for measurement and manipulation. Universal single-qubit gates are implemented using engineered single-photon and two-photon drives to deform the pseudo-potential, and a cat-quadrature readout method is employed to achieve high-fidelity quantum nondemolition measurement. The performance of the qubits is systematically characterized through lifetime measurements and benchmarking protocols, including quantum process tomography, gate set tomography, and dihedral randomized benchmarking, revealing a strongly biased noise structure with high performance. These results establish an experimental framework for the design, control, and characterization of Kerr-cat qubits and demonstrate their potential as hardware-efficient building blocks for scalable fault-tolerant quantum computing.