Quantum Parameter Estimation (QPE) is important from the perspective of both fundamental quantum research and various practical applications of quantum technologies such as for developing optimal quantum control strategies. Standard and traditional methods for QPE involve projective measurements on thousands of identically prepared quantum systems. However, these methods face limitations, particularly in terms of the required number of samples and the associated experimental resources. In this work, we present a novel method for precise QPE that diverges from conventional techniques, employs continuous measurements, and enables accurate QPE with a single quantum trajectory. In an application, we demonstrate the use of the method for the task of parameter estimation and force sensing of a levitated nanoparticle.
Quantum Parameter Estimation (QPE) is important from the perspective of both fundamental quantum research and various practical applications of quantum technologies such as for developing optimal quantum control strategies. Standard and traditional methods for QPE involve projective measurements on thousands of identically prepared quantum systems. However, these methods face limitations, particularly in terms of the required number of samples and the associated experimental resources. In this work, we present a novel method for precise QPE that diverges from conventional techniques, employs continuous measurements, and enables accurate QPE with a single quantum trajectory. In an application, we demonstrate the use of the method for the task of parameter estimation and force sensing of a levitated nanoparticle.
A pivotal task in quantum metrology, and quantum parameter estimation in general, is to design schemes that achieve the highest precision with the given resources. Standard models of quantum metrology usually assume that the dynamics is fixed and that the highest precision is achieved by preparing the optimal probe states and performing optimal measurements. However, in many practical experimental settings, additional controls are usually available to alter the dynamics. Here we propose to use optimal control methods for further improvement of the precision limit of quantum parameter estimation. We show that, by exploring the additional degree of freedom offered by the controls, a higher-precision limit can be achieved. In particular, we show that the precision limit under the controlled schemes can go beyond the constraints put by the coherent time, which is in contrast with the standard scheme where the precision limit is always bounded by the coherent time.
This thesis explores the topics of parameter estimation and model reduction in the context of quantum filtering. The last is a mathematically rigorous formulation of continuous quantum measurement, in which a stream of auxiliary quantum systems is used to infer the state of a target quantum system. Fundamental quantum uncertainties appear as noise which corrupts the probe observations and therefore must be filtered in order to extract information about the target system. This is analogous to the classical filtering problem in which techniques of inference are used to process noisy observations of a system in order to estimate its state. Given the clear similarities between the two filtering problems, I devote the beginning of this thesis to a review of classical and quantum probability theory, stochastic calculus and filtering. This allows for a mathematically rigorous and technically adroit presentation of the quantum filtering problem and solution. Given this foundation, I next consider the related problem of quantum parameter estimation, in which one seeks to infer the strength of a parameter that drives the evolution of a probe quantum system. By embedding this problem in the state estimation problem solved by the quantum filter, I present the optimal Bayesian estimator for a parameter when given continuous measurements of the probe system to which it couples. For cases when the probe takes on a finite number of values, I review a set of sufficient conditions for asymptotic convergence of the estimator. For a continuous-valued parameter, I present a computational method called quantum particle filtering for practical estimation of the parameter. Using these methods, I then study the particular problem of atomic magnetometry and review an experimental method for potentially reducing the uncertainty in the estimate of the magnetic field beyond the standard quantum limit. The technique involves double-passing a probe laser field through the atomic system, giving rise to effective non-linearities which enhance the effect of Larmor precession allowing for improved magnetic field estimation. I then turn to the topic of model reduction, which is the search for a reduced computational model of a dynamical system. This is a particularly important task for quantum mechanical systems, whose state grows exponentially in the number of subsystems. In the quantum filtering setting, I study the use of model reduction in developing a feedback controller for continuous-time quantum error correction. By studying the propagation of errors in a noisy quantum memory, I present a computation model which scales polynomially, rather than exponentially, in the number of physical qubits of the system. Although inexact, a feedback controller using this model performs almost indistinguishably from one using the full model. I finally review an exact but polynomial model of collective qubit systems undergoing arbitrary symmetric dynamics which allows for the efficient simulation of spontaneous-emission and related open quantum system phenomenon.
As one of the main pillars of quantum technologies, quantum metrology aims to improve measurement precision using techniques from quantum information. The two main strategies to achieve this are the preparation of nonclassical states and the design of optimized measurement observables. We discuss precision limits and optimal strategies in quantum metrology and sensing with a single mode of quantum continuous variables. We focus on the practically most relevant cases of estimating displacements and rotations and provide the sensitivities of the most important classes of states that includes Gaussian states and superpositions of Fock states or coherent states. Fundamental precision limits that are obtained from the quantum Fisher information are compared to the precision of a simple moment-based estimation strategy based on the data obtained from possibly sub-optimal measurement observables, including homodyne, photon number, parity and higher moments. Finally, we summarize some of the main experimental achievements and present emerging platforms for continuous-variable sensing. These results are of particular interest for experiments with quantum light, trapped ions, mechanical oscillators, and microwave resonators.
Quantum phase estimation (QPE) is a fundamental technique for determining the phase of a quantum state, crucial for various quantum algorithms and quantum measurements. This paper introduces a novel adaptive optimization algorithm, dubbed the "Adaptive Quantum Phase Estimation" (AQPE) algorithm, designed to enhance the efficiency of QPE by dynamically adjusting parameters during the state estimation process. We demonstrate the effectiveness of AQPE through rigorous theoretical analysis and extensive numerical simulations, achieving significantly improved convergence rates compared to traditional optimization techniques. The algorithm leverages a feedback mechanism based on the observed phase error during the estimation, allowing it to iteratively refine the parameter set and ultimately locate the optimal phase estimation. We present preliminary results demonstrating the algorithm's capability to mitigate the challenges associated with conventional QPE, particularly in the presence of noisy data. The implications of this research extend to broader advancements in quantum algorithm design and computational power.
Recent years have witnessed a growing interest in understating the limitations imposed by quantum noise in precision measurements and devising techniques to reduce it. The attention is currently turning to the simultaneously estimation of several parameters of interest, driven by its promising potential across a wide range of sensing applications as well as fueled by experimental progress in various optical and atomic platforms. Here, we provide a comprehensive overview of key research directions in multiparameter quantum sensing and metrology, highlighting both opportunities and challenges. We introduce the basic framework, discuss ultimate sensitivity bounds, optimal measurement strategies, and the role of quantum incompatibility, showing important differences with respect to single-parameter estimation. Additionally, we discuss emerging experimental implementations in distributed quantum sensing, including cutting-edge optimization techniques. This review aims to bridge the gap between theory and experiments, paving the way for the next-generation of quantum sensors and their integration with other quantum technologies.
Abstract We present an inference method utilizing artificial neural networks for parameter estimation of a quantum probe monitored through a single continuous measurement. Unlike existing approaches focusing on the diffusive signals generated by continuous weak measurements, our method harnesses quantum correlations in discrete photon-counting data characterized by quantum jumps. We benchmark the precision of this method against Bayesian inference, which is optimal in the sense of information retrieval. By using numerical experiments on a two-level quantum system, we demonstrate that our approach can achieve a similar optimal performance as Bayesian inference, while drastically reducing computational costs. Additionally, the method exhibits robustness against the presence of imperfections in both measurement and training data. This approach offers a promising and computationally efficient tool for quantum parameter estimation with photon-counting data, relevant for applications such as quantum sensing or quantum imaging, as well as robust calibration tasks in laboratory-based settings.