Quantum control of an oscillator with a Kerr-cat qubit
Andy Z. Ding, Benjamin L. Brock, Alec Eickbusch, Akshay Koottandavida, Nicholas Frattini, Rodrigo G. Cortiñas, Vidul R. Joshi, Stijn J. de Graaf, Benjamin J. Chapman, Suhas Ganjam, Luigi Frunzio, Robert J. Schoelkopf, Michel Devoret
Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes due to its theoretically-exponential noise bias, which would enable fault-tolerant error syndrome measurements, but the coupling required to perform these syndrome measurements has not yet been demonstrated. In this work, we experimentally realize driven parametric coupling of a Kerr-cat qubit to a high-quality-factor microwave cavity and demonstrate a gate set that would enable universal quantum control of the cavity. We measure the decoherence of the cavity in the presence of the Kerr-cat and discover excess dephasing due to heating of the Kerr-cat to excited states. By engineering frequency-selective dissipation to counteract this heating, we are able to eliminate this dephasing, thereby demonstrating a high on-off ratio of control. Our results pave the way toward using the Kerr-cat to fault-tolerantly measure error syndromes of bosonic codes. Biased noise qubits, which can selectively suppress certain types of noise, are advantageous for quantum error correction of bosonic codes. Here the authors make an important step in this direction by demonstrating quantum control of a harmonic oscillator with a biased noise qubit.
Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes due to its theoretically-exponential noise bias, which would enable fault-tolerant error syndrome measurements, but the coupling required to perform these syndrome measurements has not yet been demonstrated. In this work, we experimentally realize driven parametric coupling of a Kerr-cat qubit to a high-quality-factor microwave cavity and demonstrate a gate set that would enable universal quantum control of the cavity. We measure the decoherence of the cavity in the presence of the Kerr-cat and discover excess dephasing due to heating of the Kerr-cat to excited states. By engineering frequency-selective dissipation to counteract this heating, we are able to eliminate this dephasing, thereby demonstrating a high on-off ratio of control. Our results pave the way toward using the Kerr-cat to fault-tolerantly measure error syndromes of bosonic codes. Biased noise qubits, which can selectively suppress certain types of noise, are advantageous for quantum error correction of bosonic codes. Here the authors make an important step in this direction by demonstrating quantum control of a harmonic oscillator with a biased noise qubit.
In quantum error correction, information is encoded in a high-dimensional system to protect it from the environment.A crucial step is to use natural, two-body operations with an ancilla to extract information about errors without causing backaction on the encoded information.Essentially, ancilla errors must not propagate to the encoded system and induce errors beyond those which can be corrected.The current schemes for achieving this fault tolerance to ancilla errors come at the cost of increased overhead requirements.An efficient way to extract error syndromes in a fault-tolerant manner is by using a single ancilla with a strongly biased noise channel.Typically, however, required elementary operations can become challenging when the noise is extremely biased.We propose to overcome this shortcoming by using a bosonic-cat ancilla in a parametrically driven nonlinear oscillator.Such a cat qubit experiences only bit-flip noise, while the phase flips are exponentially suppressed.To highlight the flexibility of this approach, we illustrate the syndrome extraction process in a variety of codes such as qubit-based toric, bosonic-cat, and Gottesman-Kitaev-Preskill codes.Our results open a path for realizing hardware-efficient, fault-tolerant error syndrome extraction.
The rich dynamics and large Hilbert space of quantum harmonic oscillators make them natural candidates for hardware-efficient and error-correctable quantum information processing. However, implementing direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that populate the excited states of a nonlinear element, which introduces additional dissipation channels and potential leakage from the encoded manifold. Here, we engineer a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities. Crucially, this dynamics does not excite the mediating nonlinear coupler, thereby suppressing coupler induced decoherence and leakage out of the bosonic code space. We use this direct nonlinear coupling to implement a controlled-phase gate within the single- and two-photon subspaces of two oscillators, deterministically generating entanglement between them. Finally, we use these engineered dynamics to implement a photon-number parity check on a storage cavity via purely bosonic interactions with an ancillary cavity, demonstrating an enhancement in the storage lifetime. Our work provides a promising pathway toward engineering robust operations that act entirely within a protected bosonic code space and realizing fault-tolerant quantum information processing with bosonic elements.
Abstract The rich dynamics and large Hilbert space of quantum harmonic oscillators make them natural candidates for hardware-efficient and error-correctable quantum information processing. However, implementing direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that necessarily populate the excited states of a nonlinear coupler, introducing additional dissipation channels and potential leakage outside the encoded manifold. Here, we present a fundamentally different approach to generate nonlinear coupling between bosonic modes: a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities, which does not populate the mediating coupler. Crucially, this dynamics preserves the bosonic code space throughout, which is essential for fault-tolerant bosonic quantum computation. We demonstrate that the engineered cross-Kerr can be used to directly implement controlled-phase gates between two oscillators encoded in the single- and two-photon subspaces. Further, we apply the engineered dynamics to implement code-space-preserving parity checks using one of the oscillators as an ancillary mode, demonstrating an all-bosonic syndrome extraction that extends the effective lifetime of a storage oscillator. This work establishes a qualitatively different strategy for bosonic control, providing a pathway toward fault-tolerant quantum information processing with purely bosonic gates and syndrome measurements.
Bosonic quantum error correction represents a route towards significant hardware overhead reduction for fault-tolerant quantum computation. However, controlling quantum harmonic oscillators that encode the quantum information comes with its own challenges. In many platforms such as superconducting circuits and trapped ions, the bosonic degree of freedom is controlled by an ancillary qubit whose decay during a qubit-oscillator gate propagates to the oscillator as a continuous error. Such errors generally lie beyond the scope of errors that the bosonic code is capable of correcting. We introduce the continuous-variable flag: an auxiliary oscillator coupled to the ancilla whose phase-space position encodes the continuous error corrupting the storage mode. After the gate, a heterodyne measurement of the flag estimates this continuous-variable error and a subsequent feedback control undoes it up to a bosonic code stabilizer. The scheme requires no new ingredients, as the flag is driven by the same dispersive coupling, displacements and rotations that implement the gates it is supposed to protect. We construct sequences protecting conditional rotations to all orders in ancilla decay with one flag, and conditional displacements to first order with one flag and to all orders with two. Simulations with realistic circuit-QED parameters predict more than three orders of magnitude fewer logical errors for the parity measurement of a four-component cat code, and a finite-energy GKP logical lifetime near its noiseless-ancilla bound. By discretizing continuous-variable errors, the flags introduced in this work are a useful tool for any hybrid oscillator-qubit processor, and open the route towards fault-tolerant simulation and computation with bosonic modes.
Quantum computing crucially relies on maintaining quantum coherence for the duration of a calculation. Bosonic quantum error correction protects this coherence by encoding qubits into superpositions of noise-resilient oscillator states. In the case of the Kerr-cat qubit (KCQ), these states derive their stability from being the quasi-degenerate ground states of an engineered Hamiltonian in a driven nonlinear oscillator. KCQs are experimentally compatible with on-chip architectures and high-fidelity operations, making them promising candidates for a scalable bosonic quantum processor. However, their bit-flip time must increase further to fully leverage these advantages. Here, we present direct evidence that the bit-flip time in a KCQ is limited by leakage out of the qubit manifold and experimentally mitigate this process. We coherently control the leakage population and measure it to be > 9%, twelve times higher than in the undriven system. We then cool this population back into the KCQ manifold with engineered dissipation, identify conditions under which this suppresses bit-flips, and demonstrate increased bit-flip times up to 3.6 milliseconds. By employing both Hamiltonian confinement and engineered dissipation, our experiment combines two paradigms for Schrödinger-cat qubit stabilization. Our results elucidate the interplay between these stabilization processes and indicate a path towards fully realizing the potential of these qubits for quantum error correction.
Quantum computing promises exponential advantages for simulating quantum systems and solving certain computational problems beyond the reach of classical computers, but the fragility of qubits and the resulting errors present a major challenge for scalable implementations. One promising approach is to engineer qubits whose physical noise processes are intrinsically biased, enabling more efficient quantum error correction. This dissertation investigates quantum computing with superconducting Kerr-cat qubits, a bosonic qubit architecture in which qubit states are encoded in coherent states of a nonlinear oscillator stabilized by a two-photon drive. This stabilization creates an effective double-well pseudo-potential that strongly suppresses bit-flip errors while enabling universal quantum control, leading to a noise-biased qubit. A superconducting device architecture based on SNAIL nonlinear oscillators is developed to realize Kerr-cat qubits with tunable parameters and high coherence, integrating readout resonators, dedicated filters, and microwave control lines for measurement and manipulation. Universal single-qubit gates are implemented using engineered single-photon and two-photon drives to deform the pseudo-potential, and a cat-quadrature readout method is employed to achieve high-fidelity quantum nondemolition measurement. The performance of the qubits is systematically characterized through lifetime measurements and benchmarking protocols, including quantum process tomography, gate set tomography, and dihedral randomized benchmarking, revealing a strongly biased noise structure with high performance. These results establish an experimental framework for the design, control, and characterization of Kerr-cat qubits and demonstrate their potential as hardware-efficient building blocks for scalable fault-tolerant quantum computing.