Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2407.02722

Pulse Design of Baseband Flux Control for Adiabatic Controlled-Phase Gates in Superconducting Circuits

Qi Ding, Alan V. Oppenheim, Petros T. Boufounos, Simon Gustavsson, Jeffrey A. Grover, Thomas A. Baran, William D. Oliver

Published Jul 3, 2024• 0 citations
arXivHTMLPDF

Abstract

Despite progress towards achieving low error rates with superconducting qubits, error-prone two-qubit gates remain a bottleneck for realizing large-scale quantum computers. Therefore, a systematic framework to design high-fidelity gates becomes imperative. One type of two-qubit gate in superconducting qubits is the controlled-phase (CPHASE) gate, which utilizes a conditional interaction between higher energy levels of the qubits controlled by a baseband flux pulse on one of the qubits or a tunable coupler. In this work, we study an adiabatic implementation of CPHASE gates and formulate the design of the control trajectory for the gate as a pulse-design problem. We show in simulation that the Chebyshev-based trajectory can, in certain cases, enable gates with gate infidelity lower by an average of 23.3% when compared to the widely used Slepian-based trajectory.

DOI
10.48550/arxiv.2407.02722

Related papers

Application of Weighted Chebyshev Approximation in Pulse Design for Quantum Gates

Qi Ding, Alan V. Oppenheim, Petros T. Boufounos +4 more

Chebyshev approximation problems are fundamen-tal in approximation theory and are integral to various engi-neering applications. In this study, we suggest that weighted Chebyshev approximation (WCA) can be effectively applied to designing quantum gates. Specifically, we examine a class of two-qubit gates in superconducting qubits known as controlled-phase (CPHASE) gates, which leverage interactions between higher levels controlled by baseband flux pulses. We frame the design of CPHASE gates as a pulse design problem and propose Chebyshev pulses, generated through WCA, as an alternative solution. We utilize an illustrative example to demonstrate our process of designing a Chebyshev pulse with WCA, then contrast it with a benchmark Slepian pulse for comparison. We find that Chebyshev pulses can facilitate faster CPHASE gates while ensuring leakage errors remain below the desired threshold.

SiPS ... design and implementation - IEEE Workshop on Signal Processing Systems•Nov 4, 2024•0 citations

Controlled-Controlled-Phase Gates for Superconducting Qubits Mediated by a Shared Tunable Coupler

Niklas J. Glaser, Federico Roy, Stefan Filipp

Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.

arXiv:2206.12392•Physical Review Applied•Apr 3, 2023•28 citations

Baseband Control of Superconducting Qubits with Shared Microwave Drives

Peng Zhao, Ruixia Wang, Mengjun Hu +4 more

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.

arXiv:2211.06833•Physical Review Applied•May 15, 2023•12 citations

Coupler-Assisted Controlled-Phase Gate with Enhanced Adiabaticity

Ji Chu, Fei Yan

High-fidelity two-qubit entangling gates are essential building blocks for fault-tolerant quantum computers. Over the past decade, tremendous efforts have been made to develop scalable high-fidelity two-qubit gates with superconducting quantum circuits. Recently, an easy-to-scale controlled-phase gate scheme that utilizes the tunable-coupling architecture with fixed-frequency qubits [Phys. Rev. Lett. 125, 240502 (2020); Phys. Rev. Lett. 125, 240503 (2020)] has been demonstrated with high fidelity and attracted broad interest. However, in-depth understanding of the underlying mechanism is still missing, preventing us from fully exploiting its potential. Here we present a comprehensive theoretical study, explaining the origin of the high-contrast $ZZ$ interaction. Based on improved understanding, we develop a general yet convenient method for shaping an adiabatic pulse in a multilevel system, and identify how to optimize the gate performance from design. Given state-of-the-art coherence properties, we expect the scheme to potentially achieve a two-qubit gate error rate near ${10}^{\ensuremath{-}5}$, which would drastically speed up the progress towards fault-tolerant quantum computation.

arXiv:2106.00725•Physical Review Applied•Nov 9, 2021•42 citations

Implementation of Conditional Phase Gates Based on Tunable Z Z Interactions

Michele C. Collodo, J. Herrmann, Nathan Lacroix +7 more

High fidelity two-qubit gates exhibiting low cross talk are essential building blocks for gate-based quantum information processing. In superconducting circuits, two-qubit gates are typically based either on rf-controlled interactions or on the in situ tunability of qubit frequencies. Here, we present an alternative approach using a tunable cross-Kerr-type ZZ interaction between two qubits, which we realize with a flux-tunable coupler element. We control the ZZ-coupling rate over 3 orders of magnitude to perform a rapid (38 ns), high-contrast, low leakage (0.14±0.24%) conditional phase CZ gate with a fidelity of 97.9±0.7% as measured in interleaved randomized benchmarking without relying on the resonant interaction with a noncomputational state. Furthermore, by exploiting the direct nature of the ZZ coupling, we easily access the entire conditional phase gate family by adjusting only a single control parameter.

arXiv:2005.08863•Physical Review Letters•Dec 9, 2020•137 citations

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

Nikita S. Smirnov, Aleksei R. Matanin, Аnton I. Ivanov +15 more

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

arXiv:2509.04965•Physical Review Applied•Jul 13, 2026•0 citations
Despite progress towards achieving low error rates with superconducting qubits, error-prone two-qubit gates remain a bottleneck for realizing large-scale quantum computers. Therefore, a systematic framework to design high-fidelity gates becomes imperative. One type of two-qubit gate in superconducting qubits is the controlled-phase (CPHASE) gate, which utilizes a conditional interaction between higher energy levels of the qubits controlled by a baseband flux pulse on one of the qubits or a tunable coupler. In this work, we study an adiabatic implementation of CPHASE gates and formulate the design of the control trajectory for the gate as a pulse-design problem. We show in simulation that the Chebyshev-based trajectory can, in certain cases, enable gates with gate infidelity lower by an average of 23.3% when compared to the widely used Slepian-based trajectory.
Chebyshev approximation problems are fundamen-tal in approximation theory and are integral to various engi-neering applications. In this study, we suggest that weighted Chebyshev approximation (WCA) can be effectively applied to designing quantum gates. Specifically, we examine a class of two-qubit gates in superconducting qubits known as controlled-phase (CPHASE) gates, which leverage interactions between higher levels controlled by baseband flux pulses. We frame the design of CPHASE gates as a pulse design problem and propose Chebyshev pulses, generated through WCA, as an alternative solution. We utilize an illustrative example to demonstrate our process of designing a Chebyshev pulse with WCA, then contrast it with a benchmark Slepian pulse for comparison. We find that Chebyshev pulses can facilitate faster CPHASE gates while ensuring leakage errors remain below the desired threshold.
Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.
Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.
High-fidelity two-qubit entangling gates are essential building blocks for fault-tolerant quantum computers. Over the past decade, tremendous efforts have been made to develop scalable high-fidelity two-qubit gates with superconducting quantum circuits. Recently, an easy-to-scale controlled-phase gate scheme that utilizes the tunable-coupling architecture with fixed-frequency qubits [Phys. Rev. Lett. 125, 240502 (2020); Phys. Rev. Lett. 125, 240503 (2020)] has been demonstrated with high fidelity and attracted broad interest. However, in-depth understanding of the underlying mechanism is still missing, preventing us from fully exploiting its potential. Here we present a comprehensive theoretical study, explaining the origin of the high-contrast ZZZZZZ interaction. Based on improved understanding, we develop a general yet convenient method for shaping an adiabatic pulse in a multilevel system, and identify how to optimize the gate performance from design. Given state-of-the-art coherence properties, we expect the scheme to potentially achieve a two-qubit gate error rate near ${10}^{\ensuremath{-}5}$, which would drastically speed up the progress towards fault-tolerant quantum computation.
High fidelity two-qubit gates exhibiting low cross talk are essential building blocks for gate-based quantum information processing. In superconducting circuits, two-qubit gates are typically based either on rf-controlled interactions or on the in situ tunability of qubit frequencies. Here, we present an alternative approach using a tunable cross-Kerr-type ZZ interaction between two qubits, which we realize with a flux-tunable coupler element. We control the ZZ-coupling rate over 3 orders of magnitude to perform a rapid (38 ns), high-contrast, low leakage (0.14±0.24%) conditional phase CZ gate with a fidelity of 97.9±0.7% as measured in interleaved randomized benchmarking without relying on the resonant interaction with a noncomputational state. Furthermore, by exploiting the direct nature of the ZZ coupling, we easily access the entire conditional phase gate family by adjusting only a single control parameter.
High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of 99.5%99.5\%99.5%. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below 1×10−31 \times 10^{-3}1×10−3 is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors