Long-distance optical quantum channels are necessarily lossy, leading to errors in transmitted quantum information, entanglement degradation and, ultimately, poor protocol performance. Quantum states carrying information in the channel can be probabilistically amplified to compensate for loss, but are destroyed when amplification fails. Quantum correction of the channel itself is therefore required, but break-even performance-where arbitrary states can be better transmitted through a corrected channel than an uncorrected one-has so far remained out of reach. Here we perform distillation by heralded amplification to improve a noisy entanglement channel. We subsequently employ entanglement swapping to demonstrate that arbitrary quantum information transmission is unconditionally improved-i.e., without relying on postselection or post-processing of data-compared to the uncorrected channel. In this way, it represents realization of a genuine quantum relay. Our channel correction for single-mode quantum states will find use in quantum repeater, communication and metrology applications.
Long-distance optical quantum channels are necessarily lossy, leading to errors in transmitted quantum information, entanglement degradation and, ultimately, poor protocol performance. Quantum states carrying information in the channel can be probabilistically amplified to compensate for loss, but are destroyed when amplification fails. Quantum correction of the channel itself is therefore required, but break-even performance-where arbitrary states can be better transmitted through a corrected channel than an uncorrected one-has so far remained out of reach. Here we perform distillation by heralded amplification to improve a noisy entanglement channel. We subsequently employ entanglement swapping to demonstrate that arbitrary quantum information transmission is unconditionally improved-i.e., without relying on postselection or post-processing of data-compared to the uncorrected channel. In this way, it represents realization of a genuine quantum relay. Our channel correction for single-mode quantum states will find use in quantum repeater, communication and metrology applications.
Loss-induced errors are inevitable in long-distance information transfer and lead to quantum state degradation in quantum communication. It is possible to reduce the effect of loss on a quantum state using probabilistic quantum amplification which, however, destroys the input state in cases when it fails. Instead, what we present here is a realization of an error-corrected quantum channel, where we prepare a purified copy of entanglement. Upon success over this operation, it can be used to teleport the state over the so-improved channel. We test our channel by using it to transmit entanglement through a large amount of loss and demonstrate improved performance over direct transmission, without relying on post-selection.
This paper investigates the feasibility and potential benefits of employing quantum relays to enhance secure communication over noisy channels. Traditional direct quantum communication suffers from signal degradation and loss over extended distances, severely limiting its practical application. We propose a novel architecture utilizing quantum entanglement and measurement feedback, where a relay node acts as an intermediary to amplify and correct quantum signals. The core concept involves establishing entanglement between the sender, receiver, and the relay. Measurements performed by the relay, coupled with feedback, enable the relay to effectively combat channel noise and preserve the integrity of the transmitted quantum information. We formally describe the key protocols and mathematical formulations involved, emphasizing the role of entanglement distillation and quantum error correction. The presented approach offers a promising pathway to overcoming the distance limitations of direct quantum communication and establishing secure quantum networks. This work focuses on theoretical development and lays the groundwork for future experimental investigations.
Quantum communications enable secure key transmission and entanglement distribution, but their rates and maximum transmission distances are limited due to the losses and noise introduced by quantum channels. Various techniques have been developed to address these limitations, tailored to the platform and the nature of the decoherence. In this thesis, we explore ways to enhance the performance of quantum communications, with a particular focus on increasing the key rates and transmission distances in quantum key distribution (QKD), a method that leverages quantum mechanics to securely share keys between trusted parties. Additionally, we aim to improve the purity of entangled states shared between two parties, contributing to broader advancements in quantum communications. We begin by introducing a software-enhanced continuous-variable QKD (CV-QKD) protocol, where keys are encoded onto the phase and amplitude degrees of the optical field. This protocol enhances both transmission distance and key rates through a post-selection method employing arbitrary filters, experimentally demonstrated on two different platforms. Its adaptability makes it highly promising, as it can be implemented on existing CV-QKD platforms and dynamically optimises key rates for rapidly changing channels. We then present a protocol for the pure-loss channel leveraging quantum repeaters to mitigate the channel losses by segmenting the total communication distance into smaller, more manageable intervals. This repeater-like protocol introduces a more efficient entanglement-swapping measurement at the repeater station than the state-of-the-art twin-field protocols. Instead of polarisation encoding, our protocol relies on encoding keys in the photon-number basis, optimising the states to achieve the highest key rates for each distance. Notably, this protocol shows strong potential for improving long-distance quantum communication by surpassing the capacity of the direct communication channel at a shorter distance than the existing repeater protocols such as twin-field QKD while achieving an overall higher transmission distance. Finally, in this thesis, we demonstrate that for the Pauli-dephasing channel, placing a node in the middle of the quantum channel to perform a Bell-state measurement as an entanglement-swapping operation does not result in improved key rates, even with reduced decoherence. As a result, we propose an entanglement purification protocol that refines a larger set of noisy entangled states into a smaller set of high-fidelity ones using local operations and classical communication. This purification protocol builds upon earlier purification methods, extending their application from two Bell pairs to any number of Bell pairs and thereby achieving the capacity of the dephasing channel. Through numerous recursive iterations, it produces near-perfect Bell pairs, making it well-suited for quantum repeaters and correcting dephasing errors in quantum computers.
Quantum relays are central to both quantum communication and distributed quantum computing, enabling long-distance transmission and modular architectures. Unlike classical repeaters, quantum repeaters preserve coherence without amplifying quantum information, relying on entanglement swapping and quantum error correction to overcome loss and decoherence. In this work, we investigate the transmission of quantum information via quantum relay channels. Our three-terminal relay model captures the trade-off between repeater-assisted and repeaterless communication strategies. Specifically, we propose a partial decode-forward strategy, in which quantum ``message system" consists of two components. The first component is decoded by the relay and then sent to the destination receiver, whereas the second component is decoded by the destination receiver without the relay's help. We analyze both entanglement-assisted and unassisted scenarios. As a special case, the full decode-forward strategy is recovered, with the relay decoding, re-encoding, and forwarding the entire message. Our framework allows for different entanglement topologies between the transmitter, the relay and the destination receiver, recovering known results on entanglement-assisted and unassisted communication. Furthermore, we discuss the interpretation of coding with quantum side information. These findings provide a foundation for designing secure, efficient, and reliable quantum networks and for realizing practical quantum repeaters and long-range quantum key distribution.
Quantum communication enables various technological possibilities that are hard or impossible with classical communication. These include secure distribution of keys, transfer of quantum information and distributed quantum computation and sensing. Quantum communication relies on the ability to transmit a quantum state over some distance. Exponential photon loss from fibre inevitably limits the distance one would be able to achieve this over and therefore make use of these promising new technologies.Quantum repeaters have been proposed as a solution to this problem. Elementary repeater protocols involve dividing the channel into smaller segments with repeater nodes, distributing entanglement between these nodes and then performing swapping operations to connect entangled pairs and purification to correct operation errors. In the years since these elementary protocols, quantum repeaters have been through extensive theoretical improvements including utilising the benefits of quantum error correction to improve efficiency.However, the vast majority of these protocols are for discrete encodings of quantum information. There is significant interest in using continuous variable encodings of quantum information for quantum communication applications. This is motivated in part by the ease of generating, manipulating and detecting quantum states and additionally the increased compatibility with existing infrastructure. In this thesis we present one of the first quantum repeater protocols for continuous variable encodings of quantum information.The continuous variable quantum repeater we present in this thesis is based on concatenated error correction protocols that work to correct loss on any optical field state. We thoroughly investigate operation of this error correction protocol including the trade-offs associated with real implementations, various modifications to the error correction protocol as well as whether it can be implemented with current technology.We illustrate how these error correction protocols may be structured to form a quantum repeater that inhibits the exponential photon loss problem with a resource cost that scales polynomially with distance. We show that our continuous variable repeater is able to beat the fundamental bound on quantum communication without a repeater. Finally, we compare the performance of our first generation continuous variable repeater to existing first generation discrete variable protocols.
We study the use of entanglement purification for quantum communication over long distances. For distances much longer than the coherence length of a corresponding noisy quantum channel, the fidelity of transmission is usually so low that standard purification methods are not applicable. It is possible, however, to divide the channel into shorter segments that are purified separately and then connected by the method of entanglement swapping. This method can be much more efficient than schemes based on quantum error correction, as it makes explicit use of two-way classical communication. An important question is how the noise, introduced by imperfect local operations (that constitute the protocols of purification and the entanglement swapping), accumulates in such a compound channel, and how it can be kept below a certain noise level. To treat this problem, we first study the applicability and the efficiency of entanglement purification protocols in the situation of imperfect local operations. We then present a scheme that allows entanglement purification over arbitrary long channels and tolerates errors on the percent level. It requires a polynomial overhead in time, and an overhead in local resources that grows only logarithmically with the length of the channel.