Bosonic codes encode quantum information into a single infinite-dimensional physical system endowed with error correction capabilities. This reduces the need for complex management of many physical constituents compared with standard approaches employing multiple physical qubits. Recent discussions of bosonic codes centre around correcting only boson-loss errors, with phase errors either actively suppressed or deferred to subsequent layers of encoding with standard qubit codes. Rotationally symmetric bosonic (RSB) codes, which include the well-known cat and binomial codes, are capable of simultaneous correction of loss and phase errors, offering an alternate route that deals with arbitrary errors already at the base layer. Here, we investigate the robustness of such codes, moving away from the more idealistic past studies towards a circuit-level noise analysis closer to the practical situation where every physical component in the device is potentially faulty. We extend the concept of fault tolerance to the case of RSB codes, and then examine the performance of two known error correction circuits under circuit-level noise. Our analysis reveals a significantly more stringent noise threshold for fault-tolerant operation than found in past works; nevertheless, we show how, through waiting-time optimization and the use of squeezing, we can restore the noise requirements to a regime achievable with near-term quantum hardware. While our focus here is on cat codes for concreteness, a similar analysis applies for general RSB codes.
Bosonic codes encode quantum information into a single infinite-dimensional physical system endowed with error correction capabilities. This reduces the need for complex management of many physical constituents compared with standard approaches employing multiple physical qubits. Recent discussions of bosonic codes centre around correcting only boson-loss errors, with phase errors either actively suppressed or deferred to subsequent layers of encoding with standard qubit codes. Rotationally symmetric bosonic (RSB) codes, which include the well-known cat and binomial codes, are capable of simultaneous correction of loss and phase errors, offering an alternate route that deals with arbitrary errors already at the base layer. Here, we investigate the robustness of such codes, moving away from the more idealistic past studies towards a circuit-level noise analysis closer to the practical situation where every physical component in the device is potentially faulty. We extend the concept of fault tolerance to the case of RSB codes, and then examine the performance of two known error correction circuits under circuit-level noise. Our analysis reveals a significantly more stringent noise threshold for fault-tolerant operation than found in past works; nevertheless, we show how, through waiting-time optimization and the use of squeezing, we can restore the noise requirements to a regime achievable with near-term quantum hardware. While our focus here is on cat codes for concreteness, a similar analysis applies for general RSB codes.
Bosonic quantum error-correcting codes offer a viable direction towards reducing the hardware overhead required for fault-tolerant quantum information processing.A broad class of bosonic codes, namely rotation-symmetric codes, can be characterized by their phase-space rotation symmetry.However, their performance has been examined to date only within an idealistic noise model.Here, we further analyze the error-correction capabilities of rotation-symmetric codes using a teleportation-based error-correction circuit.To this end, we numerically compute the average gate fidelity, including measurement errors into the noise model of the data qubit.Focusing on physical measurement models, we assess the performance of heterodyne and adaptive homodyne detection in comparison to the previously studied canonical phase measurement.This setting allows us to shed light on the role of different currently available measurement schemes when decoding the encoded information.We find that with the currently achievable measurement efficiencies in microwave optics, bosonic rotation codes undergo a substantial decrease in their break-even potential.In addition, we perform a detailed analysis of Gottesman-Kitaev-Preskill (GKP) codes using a similar error-correction circuit that allows us to analyze the effect of realistic measurement models on different codes.In comparison to RSB codes, we find for GKP codes an even greater reduction in performance together with a vulnerability to photon-number dephasing.Our results show that highly efficient measurement protocols constitute a crucial building block towards error-corrected quantum information processing with bosonic continuous-variable systems.
(Abridged.) This thesis investigates scalable fault-tolerant quantum computation through the development of bosonic quantum codes, quantum LDPC codes, and decoding protocols that connect continuous-variable and discrete-variable error correction. We investigate superconducting microwave implementations of continuous-variable quantum computing, including the deterministic generation of cubic phase states, and introduce the dissipatively stabilized squeezed cat qubit, a noise-biased bosonic encoding with enhanced error suppression and faster gates. The performance of rotation-symmetric and GKP codes is analyzed under realistic noise and measurement models, revealing key trade-offs in measurement-based schemes. To integrate bosonic codes into larger architectures, we develop decoding methods that exploit analog syndrome information, enabling quasi-single-shot decoding in concatenated systems. On the discrete-variable side, we introduce localized statistics decoding, a highly parallelizable decoder for quantum LDPC codes, and propose quantum radial codes, a new family of single-shot LDPC codes with low overhead and strong circuit-level performance. Finally, we present fault complexes, a homological framework for analyzing faults in dynamic quantum error correction protocols. Extending the role of homology in static CSS codes, fault complexes provide a general language for the design and analysis of fault-tolerant schemes.
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits. Published by the American Physical Society 2024
Bosonic codes offer hardware-efficient approaches to quantum error correction, with the best encodings offering effective protection of idle quantum information against loss and dephasing - particularly rotation-symmetric codes, which include the cat and binomial code families. However, rotation-symmetric codes are only naturally endowed with a single logical Pauli gate, while other logical gates require the use of non-linear operations, obstructing the utility of these codes for realizing quantum algorithms. Here, we balance error protection with controllability by introducing bosonic cyclic codes: a generalization of rotation-symmetric codes that enable the measured tradeoff of error protection properties for fault-tolerant logical phase gates. Through our general construction, we find that sacrificing the detectability of a single photon loss relative to a rotation-symmetric code can yield a number of logical phase gates commensurate with the original rotation symmetry order of the code, all achievable via passive Gaussian rotations. Giving the corresponding generalizations of cat and binomial codes - which we dub cyclic cat and Vandermonde codes, respectively - we further find that many of the desirable properties of these codes transfer to the bosonic cyclic code setting. We go on to discuss the larger SU(2) symmetry and rotation gates of the codes, which yield additional stabilizers and logical Pauli gates, as well as new non-Clifford gates for the smallest `kitten' binomial code, and provide a new error detection protocol. Finally, we introduce a general paradigm for converting higher-order stabilizers to logical gates, as in our generalization of rotation-symmetric codes, and apply it to several multimode bosonic codes.
Bosonic rotation codes, introduced here, are a broad class of bosonic error-correcting codes based on phase-space rotation symmetry. We present a universal quantum computing scheme applicable to a subset of this class-number-phase codes-which includes the well-known cat and binomial codes, among many others. The entangling gate in our scheme is code agnostic and can be used to interface different rotation-symmetric encodings. In addition to a universal set of operations, we propose a teleportation-based error-correction scheme that allows recoveries to be tracked entirely in software. Focusing on cat and binomial codes as examples, we compute average gate fidelities for error correction under simultaneous loss and dephasing noise and show numerically that the error-correction scheme is close to optimal for error-free ancillae and ideal measurements. Finally, we present a scheme for fault-tolerant, universal quantum computing based on the concatenation of number-phase codes and Bacon-Shor subsystem codes.
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits.