(Abridged.) This thesis investigates scalable fault-tolerant quantum computation through the development of bosonic quantum codes, quantum LDPC codes, and decoding protocols that connect continuous-variable and discrete-variable error correction. We investigate superconducting microwave implementations of continuous-variable quantum computing, including the deterministic generation of cubic phase states, and introduce the dissipatively stabilized squeezed cat qubit, a noise-biased bosonic encoding with enhanced error suppression and faster gates. The performance of rotation-symmetric and GKP codes is analyzed under realistic noise and measurement models, revealing key trade-offs in measurement-based schemes. To integrate bosonic codes into larger architectures, we develop decoding methods that exploit analog syndrome information, enabling quasi-single-shot decoding in concatenated systems. On the discrete-variable side, we introduce localized statistics decoding, a highly parallelizable decoder for quantum LDPC codes, and propose quantum radial codes, a new family of single-shot LDPC codes with low overhead and strong circuit-level performance. Finally, we present fault complexes, a homological framework for analyzing faults in dynamic quantum error correction protocols. Extending the role of homology in static CSS codes, fault complexes provide a general language for the design and analysis of fault-tolerant schemes.
Comments
PhD thesis, 101 pages, some typos corrected over https://research.chalmers.se/publication/544855
(Abridged.) This thesis investigates scalable fault-tolerant quantum computation through the development of bosonic quantum codes, quantum LDPC codes, and decoding protocols that connect continuous-variable and discrete-variable error correction. We investigate superconducting microwave implementations of continuous-variable quantum computing, including the deterministic generation of cubic phase states, and introduce the dissipatively stabilized squeezed cat qubit, a noise-biased bosonic encoding with enhanced error suppression and faster gates. The performance of rotation-symmetric and GKP codes is analyzed under realistic noise and measurement models, revealing key trade-offs in measurement-based schemes. To integrate bosonic codes into larger architectures, we develop decoding methods that exploit analog syndrome information, enabling quasi-single-shot decoding in concatenated systems. On the discrete-variable side, we introduce localized statistics decoding, a highly parallelizable decoder for quantum LDPC codes, and propose quantum radial codes, a new family of single-shot LDPC codes with low overhead and strong circuit-level performance. Finally, we present fault complexes, a homological framework for analyzing faults in dynamic quantum error correction protocols. Extending the role of homology in static CSS codes, fault complexes provide a general language for the design and analysis of fault-tolerant schemes.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.
Quantum error correction is crucial for scalable quantum information-processing applications. Traditional discrete-variable quantum codes that use multiple two-level systems to encode logical information can be hardware intensive. An alternative approach is provided by bosonic codes, which use the infinite-dimensional Hilbert space of harmonic oscillators to encode quantum information. Two promising features of bosonic codes are that syndrome measurements are natively analog and that they can be concatenated with discrete-variable codes. In this work, we propose novel decoding methods that explicitly exploit the analog syndrome information obtained from the bosonic qubit readout in a concatenated architecture. Our methods are versatile and can be generally applied to any bosonic code concatenated with a quantum low-density parity-check (QLDPC) code. Furthermore, we introduce the concept of quasi-single shot protocols as a novel approach that significantly reduces the number of repeated syndrome measurements required when decoding under phenomenological noise. To realize the protocol, we present the first implementation of time-domain decoding with the overlapping window method for general QLDPC codes and a novel analog single-shot decoding method. Our results lay the foundation for general decoding algorithms using analog information and demonstrate promising results in the direction of fault-tolerant quantum computation with concatenated bosonic-QLDPC codes. Published by the American Physical Society 2024
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits. Published by the American Physical Society 2024
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits.
We present a fault-tolerant quantum computing architecture based on a code concatenation of the parity code. In addition to the recently explored concatenation with bosonic (i.e. continuous-variable) qubits, we propose and study a concatenation with discrete-variable stabilizer codes. The parity code can be understood as a low-density-parity-check (LDPC) code tailored specifically to obtain any desired logical connectivity from nearest neighbor physical interactions. On the bosonic side, the proposed scheme enables codes with better encoding rate compared to the repetition code with the same code distances, while requiring only weight-3 and weight-4 stabilizers and nearest neighbor 2D square-lattice connectivity. On the discrete-variable side, the proposed scheme enables Calderbank-Shor-Steane (CSS) codes with less physical qubits overhead compared to the surface code but they do not form a quantum LDPC family.
Quantum computing promises exponential advantages for simulating quantum systems and solving certain computational problems beyond the reach of classical computers, but the fragility of qubits and the resulting errors present a major challenge for scalable implementations. One promising approach is to engineer qubits whose physical noise processes are intrinsically biased, enabling more efficient quantum error correction. This dissertation investigates quantum computing with superconducting Kerr-cat qubits, a bosonic qubit architecture in which qubit states are encoded in coherent states of a nonlinear oscillator stabilized by a two-photon drive. This stabilization creates an effective double-well pseudo-potential that strongly suppresses bit-flip errors while enabling universal quantum control, leading to a noise-biased qubit. A superconducting device architecture based on SNAIL nonlinear oscillators is developed to realize Kerr-cat qubits with tunable parameters and high coherence, integrating readout resonators, dedicated filters, and microwave control lines for measurement and manipulation. Universal single-qubit gates are implemented using engineered single-photon and two-photon drives to deform the pseudo-potential, and a cat-quadrature readout method is employed to achieve high-fidelity quantum nondemolition measurement. The performance of the qubits is systematically characterized through lifetime measurements and benchmarking protocols, including quantum process tomography, gate set tomography, and dihedral randomized benchmarking, revealing a strongly biased noise structure with high performance. These results establish an experimental framework for the design, control, and characterization of Kerr-cat qubits and demonstrate their potential as hardware-efficient building blocks for scalable fault-tolerant quantum computing.