Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2406.02704

Quantum-enabled continuous microwave-to-optics frequency conversion

Han Zhao, Chen, William David, Abhishek Kejriwal, Mohammad Mirhosseini

Published Jun 4, 2024• 4 citations
arXivHTMLPDF

Abstract

A quantum interface between microwave and optical photons is essential for entangling remote superconducting quantum processors. To preserve fragile quantum states, a transducer must operate efficiently while generating less than one photon of noise referred to its input. Here, we present a platform that meets these criteria, utilizing a combination of electrostatic and optomechanical interactions in devices made entirely from crystalline silicon. This platform's small mechanical dissipation and low optical absorption enable ground-state radiative cooling, resulting in quantum-enabled operation with a continuous laser drive. Under the optimal settings for high efficiency (low noise), we measure an external efficiency of $2.2\%$ ($0.47\%$) and an input-referred added noise of $0.94$ ($0.58$) in microwave-to-optics conversion. We quantify the transducer throughput using the efficiency-bandwidth product, finding it exceeds previous demonstrations with similar noise performance by approximately two orders of magnitude, thereby paving a practical path to interconnecting remote superconducting qubits.

DOI
10.48550/arxiv.2406.02704

Related papers

Hybrid integrated photonics for coherent microwave-optical transduction

Terence Blésin

Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.

•Jan 1, 2026•0 citations

Converting microwave and telecom photons with a silicon photonic nanomechanical interface

Georg Arnold, Matthias Wulf, Shabir Barzanjeh +5 more

Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a Vπ as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.

•Jan 1, 2020•75 citations

Optomechanical Ground-State Cooling in a Continuous and Efficient Electro-Optic Transducer

Benjamin Brubaker, Jonathan M. Kindem, Maxwell D. Urmey +6 more

The demonstration of a quantum link between microwave and optical frequencies would be an important step toward the realization of a quantum network of superconducting processors.A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low thermal occupancy concurrently with other desirable features like high duty cycle and high efficiency.In this work, we present an efficient and continuously operating electro-optomechanical transducer whose mechanical mode has been optically sideband cooled to its quantum ground state.The transducer achieves a maximum efficiency of 47% and minimum input-referred added noise of 3.2 photons in upconversion.Moreover, the thermal occupancy of the transducer's microwave mode is minimally affected by continuous laser illumination with power more than 2 orders of magnitude greater than that required for optomechanical ground-state cooling.

arXiv:2112.13429•Physical Review X•Jun 21, 2022•72 citations

Converting microwave and telecom photons with a silicon photonic nanomechanical interface

G. Arnold, M. Wulf, S. Barzanjeh +5 more

Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a V π as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.

arXiv:2002.11628•Nature Communications•Sep 8, 2020•83 citations

A two-dimensional piezo-optomechanical transducer

Tian Xie, Nelson Ooi, Linus Woodard +7 more

Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.

quant-pharXiv:2607.26161•Jul 30, 2026•0 citations

Quantum Optomechanics With a Stable Fabry-Pérot Cavity in a Microwave-To-Optical Transducer

Urmey, Maxwell Douglas

Continued development of complementary capabilities in two quantum technologies—information processing with microwave-frequency superconducting circuits and networks based on optical-frequency photonic links—have motivated an effort to bridge the frequency gap between them with a transducer capable of preserving quantum signals. At the same time, mechanical resonators have been engineered to interact with electromagnetic waves across the spectrum in a variety of tailorable physical implementations. This thesis describes advances in a transducer using the mechanical mode of a silicon nitride membrane as an intermediary permitting coupling between a superconducting resonant LC circuit and a Fabry-Pérot optical cavity. With this choice of architecture, we have developed transducers of unparalleled efficiency and the unique capability to run continuously without appreciably degrading the performance of the superconductor from scattered optical photons. We have been able to laser-cool the mechanical mode to an occupation of less than one photon, and achieved transducer performance capable of converting a single microwave photon to optical frequencies with a signal-to-noise ratio of 1/3. Furthermore, operating the transducer does not cause appreciable heating of a superconducting transmon qubit linked to its microwave input port. With progress towards a quantum-enabled interface, we have started to develop capabilities towards implementing protocols that optically verify the quantum performance of the transducer.

•Apr 16, 2024•0 citations
A quantum interface between microwave and optical photons is essential for entangling remote superconducting quantum processors. To preserve fragile quantum states, a transducer must operate efficiently while generating less than one photon of noise referred to its input. Here, we present a platform that meets these criteria, utilizing a combination of electrostatic and optomechanical interactions in devices made entirely from crystalline silicon. This platform's small mechanical dissipation and low optical absorption enable ground-state radiative cooling, resulting in quantum-enabled operation with a continuous laser drive. Under the optimal settings for high efficiency (low noise), we measure an external efficiency of 2.2%2.2\%2.2% (0.47%0.47\%0.47%) and an input-referred added noise of 0.940.940.94 (0.580.580.58) in microwave-to-optics conversion. We quantify the transducer throughput using the efficiency-bandwidth product, finding it exceeds previous demonstrations with similar noise performance by approximately two orders of magnitude, thereby paving a practical path to interconnecting remote superconducting qubits.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.
Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a Vπ as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.
The demonstration of a quantum link between microwave and optical frequencies would be an important step toward the realization of a quantum network of superconducting processors.A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low thermal occupancy concurrently with other desirable features like high duty cycle and high efficiency.In this work, we present an efficient and continuously operating electro-optomechanical transducer whose mechanical mode has been optically sideband cooled to its quantum ground state.The transducer achieves a maximum efficiency of 47% and minimum input-referred added noise of 3.2 photons in upconversion.Moreover, the thermal occupancy of the transducer's microwave mode is minimally affected by continuous laser illumination with power more than 2 orders of magnitude greater than that required for optomechanical ground-state cooling.
Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a V π as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.
Continued development of complementary capabilities in two quantum technologies—information processing with microwave-frequency superconducting circuits and networks based on optical-frequency photonic links—have motivated an effort to bridge the frequency gap between them with a transducer capable of preserving quantum signals. At the same time, mechanical resonators have been engineered to interact with electromagnetic waves across the spectrum in a variety of tailorable physical implementations. This thesis describes advances in a transducer using the mechanical mode of a silicon nitride membrane as an intermediary permitting coupling between a superconducting resonant LC circuit and a Fabry-Pérot optical cavity. With this choice of architecture, we have developed transducers of unparalleled efficiency and the unique capability to run continuously without appreciably degrading the performance of the superconductor from scattered optical photons. We have been able to laser-cool the mechanical mode to an occupation of less than one photon, and achieved transducer performance capable of converting a single microwave photon to optical frequencies with a signal-to-noise ratio of 1/3. Furthermore, operating the transducer does not cause appreciable heating of a superconducting transmon qubit linked to its microwave input port. With progress towards a quantum-enabled interface, we have started to develop capabilities towards implementing protocols that optically verify the quantum performance of the transducer.