Recent advances in quantum technology have highlighted the importance of controlling quantum states, especially in open quantum systems, where the system interacts with the environment. Non-Hermitian quantum mechanics describes these systems. Photonic systems are a key platform for studying non-Hermitian quantum mechanics owing to their ability to engineer gain and loss. Ultracold atomic gases also have been used to study non-Hermitian quantum mechanics; however, unlike photonics, gain control is challenging, limiting exploration to control of loss. In this paper, we report engineering of effective gain through evaporative cooling of judiciously selected initial thermal atoms, leading to Bose-Einstein condensation (BEC) in the excited eigenstates of a synthetic lattice. We achieve BEC formation in a topological edge state of the Su-Schrieffer-Heeger lattice in the synthetic hyperfine lattice, akin to atomic laser oscillations at a topological edge mode, that is, a topological atom laser.
Recent advances in quantum technology have highlighted the importance of controlling quantum states, especially in open quantum systems, where the system interacts with the environment. Non-Hermitian quantum mechanics describes these systems. Photonic systems are a key platform for studying non-Hermitian quantum mechanics owing to their ability to engineer gain and loss. Ultracold atomic gases also have been used to study non-Hermitian quantum mechanics; however, unlike photonics, gain control is challenging, limiting exploration to control of loss. In this paper, we report engineering of effective gain through evaporative cooling of judiciously selected initial thermal atoms, leading to Bose-Einstein condensation (BEC) in the excited eigenstates of a synthetic lattice. We achieve BEC formation in a topological edge state of the Su-Schrieffer-Heeger lattice in the synthetic hyperfine lattice, akin to atomic laser oscillations at a topological edge mode, that is, a topological atom laser.
"As the progress of science pushes the frontiers of studying nature to both the extremely large scale and the incredibly small scale, experiments can become increasingly difficult to perform. Therefore, a scale model experiment for these kinds of physics can be useful as long as it is relatively easy to access and control. This is the idea of quantum simulation, where one system exactly mimics another when they are subjected to equivalent physical scenarios. Topological systems, those with a property that is stabilized by their specific configuration, are often quite challenging to experimentally probe. Therefore, test bed systems have been widely and successfully applied to studying topology in an effort to advance the field, which promises enticing applications such as robust quantum technology. Our particular scheme uses a novel type of ""synthetic"" dimension for atoms of a Bose–Einstein condensate, which we call a momentum-space lattice, to emulate one-dimensional lattice models. The idea of a synthetic dimension or synthetic lattices is a useful construct to describe how the particle dynamics can evolve in degrees of freedom that are not directly related to transport in real space. This can relate to population dynamics in an internal degree of freedom, such as spin, or, in our case, in the dynamics of free-particle-like atomic momentum states. We expose a Bose–Einstein condensate to two laser fields that are capable of driving transitions between different momentum states of the condensate atoms through a two-photon Bragg diffraction process. Neighboring states in the free-particle dispersion relation are characterized by a unique momenta and energy spacing such that we can independently control every aspect of their coupling. In this thesis, we report on the design and construction of an apparatus for the production of 87Rb Bose–Einstein condensates as well as the partial construction of an apparatus for the production of 39K Bose–Einstein condensates. We also discuss the experimental realization of, and theoretical background for, our momentum-space lattice. Using the momentum-space lattice, we perform experiments on not only topological systems, but also on driven artificial spins featuring chaotic dynamics, as well as faster-than-adiabatic quantum state control and preparation. Our measurements of topological systems are based in the 1D Su–Schrieffer–Heeger model, where we report on the direct observation of the localized, solitonic edge state created by the topology inherent in the system. Through the addition of exactly tunable tunneling disorder, we observe the destruction of the band topology due to disorder at a random-singlet transition. Furthermore, we drive a trivial system into a topological phase through the addition of disorder, observing a counter-intuitive phenomenon known as the topological Anderson insulator for the first time. We go on to report on our driven, tunable spin experiment, where we probe effective spin ""squeezing"" (in the absence of any entanglement in our noninteracting system), the out-of-time-ordered correlation function, and chaos. And finally, we use our momentum-space lattice to demonstrate a technique which allows a system to be transformed faster than the adiabatic limit with no diabatic transitions in a highly non-trivial regime. Due to the versatility of the momentum-space lattice, the results detailed here have a broad impact. Our observations of topological phenomena in elementary and canonical 1D systems are some of the first experimental verifications of long-standing predictions. Further, our studies of the interplay between classical chaos and quantum systems may help shed light on this complex and rich problem. And from a more ""applied science"" perspective, our demonstrations of generalized counter-diabatic techniques are widely beneficial and applicable to many systems where adiabaticity is challenged."
Simulating higher-order topological materials in synthetic quantum matter is an active research frontier for its theoretical significance in fundamental physics and promising applications in quantum technologies. Here we experimentally implement two-dimensional (2D) momentum lattices with highly programmable ability using ultracold 87Rb atoms. Through precise control of experimental parameters, we simulate a 2D Su-Schrieffer-Heeger model with this technique, and observe the characteristic dynamics of corner and edge-bound states, where the corner state is identified as a higher-order topological bound state in the continuum. We further study the adiabatic preparation of the corner state by engineering evolutions with time-dependent Hamiltonians. We also demonstrate the higher-order topological phase transition by measuring both the bulk topological invariant and the topological corner state. Our new platform opens the avenue for exploring the exotic dynamics and topology in higher synthetic dimensions, making use of the rich degrees of freedom of cold atoms systems.
Simulating higher-order topological materials in synthetic quantum matter is an active research frontier for its theoretical significance in fundamental physics and promising applications in quantum technologies. Here we experimentally implement two-dimensional (2D) momentum lattices with highly programmable ability using ultracold 87Rb atoms. Through precise control of experimental parameters, we simulate a 2D Su-Schrieffer-Heeger model with this technique, and observe the characteristic dynamics of corner and edge-bound states, where the corner state is identified as a higher-order topological bound state in the continuum. We further study the adiabatic preparation of the corner state by engineering evolutions with time-dependent Hamiltonians. We also demonstrate the higher-order topological phase transition by measuring both the bulk topological invariant and the topological corner state. Our new platform opens the avenue for exploring the exotic dynamics and topology in higher synthetic dimensions, making use of the rich degrees of freedom of cold atoms systems.
Bose-Einstein condensates (BECs), a quantum state of matter formed when bosonic atoms are cooled close to absolute zero, have become the premier platform for investigating fundamental physics with atomic vapours. Experiments on Bose-Einstein condensates now achieve exquisite control over many aspects of the system, including interactions, trapping potential, and dynamics. This has precipitated a new wave of research into many-body quantum phenomena and, in particular, solitons. These structures are fundamental excitations of an interacting non-linear medium, of interest to a multitude of scientific disciplines from non-linear optics to financial markets. The highly controllable environment of BECs form an attractive playground for the study of solitons allowing the non-linearity to be dynamically tuned, facilitating deeper investigations into these structures. Consistently generating and analysing solitons in BEC experiments continues to be problematic. In particular, the non-linear dynamics of BECs, though required for the generation of solitons, produce particularly challenging control and optimization problems. These control problems must be solved before further investigations into the fundamental physics of soliton dynamics can be answered. This thesis makes three important advances in the control and measurement of BECs that will lead to better generation and observation of solitons. (1) a theoretical model for a control scheme capable of highly precise wavefunction engineering, (2) the experimental implementation of a machine learning algorithm for online optimisation, and (3) a continuous non-destructive imaging system capable of directly observing soliton dynamics in real-time. Together, these advances provide a suite of tools for manipulating and exploiting solitons in Bose-Einstein condensates. A novel technique was developed theoretically, offering control of the macroscopic wavefunction of a Bose-Einstein condensate with unprecedented spatial resolution and speed. The ability to control the atomic wavefunction at the fundamental length scale is key to the advancement of many quantum technologies such as quantum simulators. The magnetic resonance control scheme is demonstrated through simulation of a 87Rb condensate with the exemplar model generating a single dark soliton with corresponding π phase kink. The soliton represents a structure at the fundamental length scale of the system, and demonstrates the potential of the scheme for precision state engineering. The scheme is extended to generate higher-order soliton modes which are yet to be experimentally realised. A machine learning algorithm based on Gaussian processes was developed and implemented on the evaporative cooling stage of the production of a 87Rb Bose-Einstein condensate, successfully demonstrating fast optimisation to condensation. The Gaussian process develops a statistical model based on the data that enables the characterisation of the relationship between the experimental controls and resultant quality of the BEC. This relationship is often obfuscated through technical details of the apparatus, frustrating the use of theoretical models to design optimal evaporation ramps. These models often only consider ergodic dynamics with two-body s-wave interactions and no other loss rates with better ramps likely exploiting more complex interactions. The internal model generated from the Gaussian process utilised uncertainty in measured data, making the optimisation more robust to experimental noise than alternate methods. The algorithm is shown to produce high quality Bose-Einstein condensates in 10 times fewer experimental iterations than previously used online optimisation techniques. By exploiting information on the sensitivity of each control, the model can be used to aid experimental design. The convergence of the optimisation is further improved by eliminating a superfluous parameter identified by the model. The general usefulness of machine learning compared with bespoke optimisation algorithms has seen machine learning approach ubiquity. Finally, an experimentally straightforward technique for continuous non-destructive imaging of matter-wave solitons was developed and implemented, facilitating measurements of stochastic phenomena. The technique is readily practicable on any ultracold atom experiment with an existing absorption imaging system, simply requiring the probe laser be far-detuned from resonance. With a signal-to-noise of ∼ 33 at 1.25 GHz detuning, the technique is capable of producing 100 images with no observable heating or atom loss. Coupled with a fast optical phase locked loop, the technique can be used in conjunction with absorption imaging to generate a series of non-destructive images followed by a final high signal-to-noise absorption image solely through moving the laser on resonance for the final image. The high performance and utility of this imaging setup make it a powerful tool for ultra-cold atom experiments.
Ultracold atom arrays in optical lattices emerge as an excellent playground for the integration of topological photonics and quantum optics. Here, we study high-order topological quantum optics in an ultracold atom metasurface intended to mimic the two-dimensional Su-Schrieffer-Heeger model. We find the existence of long-range interactions beyond nearest-neighbor ones leads to isolated corner states in the band gap, and show a corner atom can be addressed by a laser drive far away from it via these nontrivial states. We demonstrate the Purcell factor can be used as a powerful tool to examine the existence of topological edge and corner states. We predict topological edge states can mediate strong coherent interactions between two remote impurity quantum emitters while suppressing dissipative losses thanks to the higher-order topology, generating robust and long-lived quantum entanglement, without the need for additional photonic structures.
Open quantum systems can be systematically controlled by making changes to their environment. A well-known example is the spontaneous radiative decay of an electronically excited emitter, such as an atom or a molecule, which is significantly influenced by the feedback from the emitter's environment, for example, by the presence of reflecting surfaces. A prerequisite for a deliberate control of an open quantum system is to reveal the physical mechanisms that determine its state. Here, we investigate the Bose-Einstein condensation of a photonic Bose gas in an environment with controlled dissipation and feedback. Our measurements offer a highly systematic picture of Bose-Einstein condensation under non-equilibrium conditions. We show that by adjusting their frequency Bose-Einstein condensates naturally try to avoid particle loss and destructive interference in their environment. In this way our experiments reveal physical mechanisms involved in the formation of a Bose-Einstein condensate, which typically remain hidden when the system is close to thermal equilibrium.