Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.09594 · Physical Review Research

Rapid on-demand generation of thermal states in superconducting quantum circuits

Timm Mörstedt, Wallace S. Teixeira, Arto Viitanen, Heidi Kivijärvi, Maaria Tiiri, Miika Rasola, András Gunyhó, Suman Kundu, Louis Lattier, Vasilii Vadimov, Gianluigi Catelani, Vasilii Sevriuk, Johannes Heinsoo, Jukka Räbinä, Joachim Ankerhold, Mikko Möttönen

Published Aug 13, 2025• 5 citations
arXivHTMLPDF

Abstract

We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an tunable environment. Through single-shot readout, we monitor the transmon up to its third excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude pulses can generate Boltzmann-distributed populations from a temperature of 110 mK up to 500 mK within 100 ns. As we propose in our work, this fast and efficient temperature control provides an appealing opportunity to demonstrate a quantum heat engine. Our results also pave the way for efficient dissipative state preparation and for reducing the circuit depth in thermally assisted quantum algorithms and quantum annealing.

DOI
10.1103/6bty-836h

Related papers

Quantum-circuit refrigeration of a superconducting microwave resonator well below a single quantum

Arto Viitanen, Timm Mörstedt, Wallace S. Teixeira +4 more

We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an tunable low-temperature environment for a superconducting 4.7 GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9 GHz continuous and 10 ns pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus, this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. Published by the American Physical Society 2024

arXiv:2308.00397•Physical Review Research•Jun 10, 2024•9 citations

Many-excitation removal of a transmon qubit using a single-junction quantum-circuit refrigerator and a two-tone microwave drive

Wallace S. Teixeira, Timm Mörstedt, Arto Viitanen +7 more

Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit. The QCR is indirectly coupled to the transmon through a resonator in the dispersive regime, constituting a carefully engineered environmental spectrum for the transmon. Using single-shot readout, we observe excitation stabilization times down to roughly 500 ns, a 20-fold speedup with QCR and a simultaneous two-tone drive addressing the e-f and f0-g1 transitions of the system. Our results are obtained at a 48-mK fridge temperature and without postselection, fully capturing the advantage of the protocol for the short-time dynamics and the drive-induced detrimental asymptotic behavior in the presence of relatively hot other baths of the transmon. We validate our results with a detailed Liouvillian model truncated up to the three-excitation subspace, from which we estimate the performance of the protocol in optimized scenarios, such as cold transmon baths and fine-tuned driving frequencies. These results pave the way for optimized reset of quantum-electric devices using engineered environments and for dissipation-engineered state preparation.

arXiv:2401.14912•Scientific Reports•Jun 14, 2024•8 citations

Initial demonstration of a quantum heat engine based on dissipation-engineered superconducting circuits

Tuomas Uusnäkki, Timm Mörstedt, Wallace S. Teixeira +2 more

Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.

arXiv:2502.20143•Nature Communications•May 5, 2026•9 citations

Noise-driven quantum-circuit refrigeration

Heidi Kivijärvi, Arto Viitanen, Timm Mörstedt +1 more

We use a transmon qubit and its dispersively coupled readout resonator to measure the Fock state populations of another microwave resonator, to which we have attached a quantum-circuit refrigerator (QCR). First, we apply noise generated at room temperature to the resonator and show that such noise drive leads to a thermal distribution of the resonator Fock states. Subsequently, we detune the noise frequency band far away from the resonance condition and vary the power of the noise applied on the QCR. We observe that such artificial thermal noise may lead to major damping of a coherent state of the resonator. Importantly, we also demonstrate that the effective temperature of a thermal resonator state can be reduced from roughly 300 to 130 mK by the introduction of the artificial thermal noise. These observations pave the way for a purely thermally powered quantum-circuit refrigerator that may unlock the use of waste heat in resetting superconducting qubits in a quantum processor and in building autonomous quantum heat engines.

arXiv:2412.05886•Physical Review Research•Apr 12, 2026•2 citations

Thermal and Residual Excited-State Population in a 3D Transmon Qubit

Xueying Jin, Archana Kamal, Adam Sears +9 more

Remarkable advancements in coherence and control fidelity have been achieved in recent years with cryogenic solid-state qubits. Nonetheless, thermalizing such devices to their milliKelvin environments has remained a long-standing fundamental and technical challenge. In this context, we present a systematic study of the first-excited-state population in a 3D transmon superconducting qubit mounted in a dilution refrigerator with a variable temperature. Using a modified version of the protocol developed by Geerlings et al., we observe the excited-state population to be consistent with a Maxwell-Boltzmann distribution, i.e., a qubit in thermal equilibrium with the refrigerator, over the temperature range 35-150 mK. Below 35 mK, the excited-state population saturates at approximately 0.1%. We verified this result using a flux qubit with ten times stronger coupling to its readout resonator. We conclude that these qubits have effective temperature T(eff)=35 mK. Assuming T(eff) is due solely to hot quasiparticles, the inferred qubit lifetime is 108 μs and in plausible agreement with the measured 80 μs.

arXiv:1412.2772•Physical Review Letters•Jun 15, 2015•177 citations

Probing instantaneous quantum circuit refrigeration in the quantum regime

Shuji Nakamura, Yoshioka, Teruaki, S. A. Lemzyakov +8 more

Recent advancements in circuit quantum electrodynamics have enabled precise manipulation and detection of the single energy quantum in quantum systems. A quantum circuit refrigerator (QCR) is capable of electrically cooling the excited population of quantum systems, such as superconducting resonators and qubits, through photon-assisted tunneling of quasi-particles within a superconductor-insulator-normal metal junction. In this study, we demonstrated instantaneous QCR in the quantum regime. We performed the time-resolved measurement of the QCR-induced cooling of photon number inside the superconducting resonator by harnessing a qubit as a photon detector. From the enhanced photon loss rate of the resonator estimated from the amount of the AC Stark shift, the QCR was shown to have a cooling power of approximately 300 aW. Furthermore, even below the single energy quantum, the QCR can reduce the number of photons inside the resonator with 100 ns pulse from thermal equilibrium. Numerical calculations based on the Lindblad master equation successfully reproduced these experimental results.

arXiv:2407.14219•Jul 19, 2024•0 citations
We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an tunable environment. Through single-shot readout, we monitor the transmon up to its third excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude pulses can generate Boltzmann-distributed populations from a temperature of 110 mK up to 500 mK within 100 ns. As we propose in our work, this fast and efficient temperature control provides an appealing opportunity to demonstrate a quantum heat engine. Our results also pave the way for efficient dissipative state preparation and for reducing the circuit depth in thermally assisted quantum algorithms and quantum annealing.
We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an tunable low-temperature environment for a superconducting 4.7 GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9 GHz continuous and 10 ns pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus, this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. Published by the American Physical Society 2024
Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit. The QCR is indirectly coupled to the transmon through a resonator in the dispersive regime, constituting a carefully engineered environmental spectrum for the transmon. Using single-shot readout, we observe excitation stabilization times down to roughly 500 ns, a 20-fold speedup with QCR and a simultaneous two-tone drive addressing the e-f and f0-g1 transitions of the system. Our results are obtained at a 48-mK fridge temperature and without postselection, fully capturing the advantage of the protocol for the short-time dynamics and the drive-induced detrimental asymptotic behavior in the presence of relatively hot other baths of the transmon. We validate our results with a detailed Liouvillian model truncated up to the three-excitation subspace, from which we estimate the performance of the protocol in optimized scenarios, such as cold transmon baths and fine-tuned driving frequencies. These results pave the way for optimized reset of quantum-electric devices using engineered environments and for dissipation-engineered state preparation.
Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.
We use a transmon qubit and its dispersively coupled readout resonator to measure the Fock state populations of another microwave resonator, to which we have attached a quantum-circuit refrigerator (QCR). First, we apply noise generated at room temperature to the resonator and show that such noise drive leads to a thermal distribution of the resonator Fock states. Subsequently, we detune the noise frequency band far away from the resonance condition and vary the power of the noise applied on the QCR. We observe that such artificial thermal noise may lead to major damping of a coherent state of the resonator. Importantly, we also demonstrate that the effective temperature of a thermal resonator state can be reduced from roughly 300 to 130 mK by the introduction of the artificial thermal noise. These observations pave the way for a purely thermally powered quantum-circuit refrigerator that may unlock the use of waste heat in resetting superconducting qubits in a quantum processor and in building autonomous quantum heat engines.
Remarkable advancements in coherence and control fidelity have been achieved in recent years with cryogenic solid-state qubits. Nonetheless, thermalizing such devices to their milliKelvin environments has remained a long-standing fundamental and technical challenge. In this context, we present a systematic study of the first-excited-state population in a 3D transmon superconducting qubit mounted in a dilution refrigerator with a variable temperature. Using a modified version of the protocol developed by Geerlings et al., we observe the excited-state population to be consistent with a Maxwell-Boltzmann distribution, i.e., a qubit in thermal equilibrium with the refrigerator, over the temperature range 35-150 mK. Below 35 mK, the excited-state population saturates at approximately 0.1%. We verified this result using a flux qubit with ten times stronger coupling to its readout resonator. We conclude that these qubits have effective temperature T(eff)=35 mK. Assuming T(eff) is due solely to hot quasiparticles, the inferred qubit lifetime is 108 μs and in plausible agreement with the measured 80 μs.
Recent advancements in circuit quantum electrodynamics have enabled precise manipulation and detection of the single energy quantum in quantum systems. A quantum circuit refrigerator (QCR) is capable of electrically cooling the excited population of quantum systems, such as superconducting resonators and qubits, through photon-assisted tunneling of quasi-particles within a superconductor-insulator-normal metal junction. In this study, we demonstrated instantaneous QCR in the quantum regime. We performed the time-resolved measurement of the QCR-induced cooling of photon number inside the superconducting resonator by harnessing a qubit as a photon detector. From the enhanced photon loss rate of the resonator estimated from the amount of the AC Stark shift, the QCR was shown to have a cooling power of approximately 300 aW. Furthermore, even below the single energy quantum, the QCR can reduce the number of photons inside the resonator with 100 ns pulse from thermal equilibrium. Numerical calculations based on the Lindblad master equation successfully reproduced these experimental results.