Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.
Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.
As superconducting quantized electric circuits continue to emerge as an exceptionally versatile and powerful platform for quantum computing and other quantum technologies, they also provide a rich foundation for exploring quantum thermodynamics. The study of heat transport in these circuits offers invaluable synergy as understanding the impact of thermal fluctuations becomes increasingly important for their operation. Heat engines represent one of the most fundamental classes of thermal devices, whether regarding classical or quantum applications. Although heat transport in superconducting circuits has been extensively studied, quantum heat engines (QHE) operating at the limit of a few excitation quanta had not been experimentally realized prior to this work. These engines offer valuable insight into the quantum thermodynamics of superconducting circuits. Beyond fundamental research, the beseeching goal is to develop integrated QHEs which generate useful work in conjunction with other quantum technologies. In this context, autonomous QHEs, capable of operating without coherent external control, are particularly compelling. In this thesis, we explore thermodynamics and quantum heat engines, with a particular focus on engineering quantum heat engines using superconducting circuits as our experimental platform. The presented research includes both experimental and theoretical advancements, focusing on driven and autonomous QHEs, respectively. First, we demonstrate that engineered environments in superconducting circuits can serve as effective thermal reservoirs for externally driven quantum heat engines. Experimentally, we show that a quantum-circuit refrigerator (QCR) can be used not only for cooling but also for heating the coupled circuit. This discovery imminently leads to the experimental realization of a quantum heat engine, where a quantum Otto cycle is driven in a transmon qubit coupled to the QCR. Second, regarding autonomous quantum heat engines, we theoretically show that non-linear optomechanical coupling can eliminate the need for external driving while providing a method for directly observing the work output. These promising theoretical results suggest that the experimental realization of an autonomous QHE is ultimately a matter of careful circuit engineering. However, achieving this experimentally remains a tantalising challenge for future research, beyond the scope of the present work.
Quantum thermodynamics sits at the intersection of quantum mechanics and thermodynamics, aiming to understand how key thermodynamic concepts such as heat, work, and entropy behave in quantum systems. A primary interest in this field is the study and development of quantum heat engines, devices that convert the flow of thermal energy into work using a quantum system as the working medium. Conventional quantum heat engines require consistent external control to drive their operating cycle. In contrast, autonomous quantum heat engines operate without such external control, instead, their cyclic behavior emerges entirely from internal dynamics and the coupling to thermal reservoirs. In this thesis, we study an autonomous quantum heat engine circuit based on superconducting quantum circuits, in which thermal noise from heat reservoirs drives cyclic energy exchange between two superconducting resonators coupled with a superconducting quantum interference device (SQUID). In this thesis, classical circuit simulations of the autonomous quantum heat engine are implemented in AWR Design Environment using lumped-element resonators, coupling capacitors, and Josephson junction models. By mapping quantum components to their classical analogues and varying the external magnetic flux threading the superconducting quantum interference device, the resonance frequencies, quality factors, and coupling dynamics of the circuit are analyzed across two parameter sets. The simulated quality factor of the second resonator exceeded the threshold required for negative dissipation in both parameter sets, consistent with conditions favorable for coherent microwave generation. Transient simulations further revealed that above a threshold drive power, energy builds up at the second resonator’s resonance frequency through SQUID-mediated coupling. This provides qualitative evidence that the classical model captures the essential inter-resonator coupling mechanism. However, systematic quantitative discrepancies in resonance frequencies and dissipation rates are identified, attributed primarily to the linearized SQUID representation used in the classical model. These results demonstrate that classical circuit simulations can qualitatively reproduce key dynamical features of the studied autonomous quantum heat engine, while also revealing the limitations of classical approximations in capturing its full quantum behavior.
Quantum heat engines provide attractive means in quantum thermodynamics for studying the fundamentals of the flow of heat and work. Previous experimental implementations of heat engines operating at the level of a few excitation quanta have utilized external driving, which has made the observation of the produced work challenging. Conversely, autonomous quantum heat engines only require a flow of heat to operate and generate work. However, autonomous quantum heat engines have not yet been experimentally demonstrated in any system despite numerous theoretical investigations. Here, we experimentally realize an autonomous quantum heat engine based on superconducting circuits. We construct the engine circuit implementing an approximate Otto cycle by coupling two superconducting resonators with a superconducting quantum interference device, and coupling this system to spectrally filtered hot and cold reservoirs. By varying the experimental conditions, we observe coherent microwave power generation arising from the internal dynamics of the system driven only by the thermal reservoirs. Our results validate previous theoretical predictions for this circuit and pave the way for detailed studies of quantum effects in heat engines and for using heat-generated coherent microwaves in circuit quantum electrodynamics.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.
Conventional heat engines convert thermal energy into mechanical work by using a working medium such as steam or gas that operates between a hot and a cold reservoir. The medium absorbs heat from the hot reservoir, produces work, then releases some heat to the cold reservoir and returns to the initial state. With the advancement of quantum technologies, researchers strive to understand whether quantum media, such as atoms, spins, superconducting circuits and semiconductor quantum dots, can be used in quantum counterparts of the classical heat engines. After a recap of the basics of classical heat engines, this review explores the theoretical foundations and advancements of quantum heat engines, focusing on the proposed two- and multilevel systems used as the working medium for the quantum Otto cycle, which is the ideal thermodynamic cycle that describes the operation of a spark-ignition internal combustion engine. The review compares the efficiency and the work extraction of these systems, discussing their performance in the high- and low-temperature limits. Alternative cycles and engines are also presented to establish the adaptability of the working media when operating under different processes and non-equilibrium conditions. In conclusion, the review offers possible applications and future developments of quantum heat engines.
Here we present an architecture for the implementation of cyclic quantum thermal engines using a superconducting circuit. The quantum engine consists of a gated Cooper-pair box, capacitively coupled to two superconducting coplanar waveguide resonators with different frequencies, acting as thermal baths. We experimentally demonstrate the strong coupling of a charge qubit to two superconducting resonators, with the ability to perform voltage driving of the qubit at GHz frequencies. By terminating the resonators of the measured structure with normal-metal resistors whose temperature can be controlled and monitored, a quantum heat engine or refrigerator could be realized. Furthermore, we numerically evaluate the performance of our setup acting as a quantum Otto-refrigerator in the presence of realistic environmental decoherence.