Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.06267 · Physical Review Letters

Efficient Initialization of Fluxonium Qubits based on Auxiliary Energy Levels

Tenghui Wang, Feng Wu, Fei Wang, Xizheng Ma, Gengyan Zhang, Jianjun Chen, Hao Deng, Ran Gao, Rui-Zi Hu, Lu Ma, Zhijun Song, Tian Xia, Make Ying, Huijuan Zhan, Hui‐Hai Zhao, Chunqing Deng

Published Jun 3, 2024• 19 citations
arXivHTMLPDF

Abstract

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wave functions, the sideband transitions are only enabled by multiphoton processes which require multitone or strong driving. Leveraging the flux tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a noncomputational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

DOI
10.1103/physrevlett.132.230601

Related papers

Universal Fast-Flux Control of a Coherent, Low-Frequency Qubit

Helin Zhang, Srivatsan Chakram, Tanay Roy +6 more

The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.

•Jan 15, 2021•104 citations

Parametrically controlled microwave-photonic interface for the fluxonium

Ke Nie, Aayam Bista, Edmond K. C. Chow +2 more

Converting quantum information from stationary qubits to traveling photons enables both fast qubit initialization and efficient generation of flying qubits for redistribution of quantum information. This conversion can be performed using cavity-sideband transitions. In the fluxonium, however, direct cavity-sideband transitions are forbidden due to parity symmetry. Here we circumvent this parity selection rule by using a three-wave mixing element to couple the fluxonium to a resonator. We experimentally demonstrate a scheme for interfacing the fluxonium with traveling photons through microwave-induced parametric conversion. We perform fast reset on the fluxonium qubit, initializing it with > 95 % ground-state population. We then implement controlled release and temporal shaping of a flying photon, useful for quantum state transfer and remote entanglement. The simplicity and flexibility of our demonstrated scheme enables fluxonium-based remote entanglement architectures. Published by the American Physical Society 2024

arXiv:2404.11847•Physical Review Applied•Nov 8, 2024•8 citations

Improved fluxonium readout through dynamic flux pulsing

Taryn V. Stefanski, Yilmaz, Figen, Eugene Y. Huang +5 more

The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.

arXiv:2411.13437•Nov 20, 2024•1 citation

Microwave-activated controlled- Z gate for fixed-frequency fluxonium qubits

Konstantin Nesterov, Ivan Pechenezhskiy, Chen Wang +2 more

The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: When biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here, we describe a controlled-$Z$ gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near $500\phantom{\rule{3.33333pt}{0ex}}\mathrm{MHz}$. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.

arXiv:1802.03095•Physical Review A•Sep 24, 2018•38 citations

Scalable fluxonium-qubit architecture with tunable interactions between noncomputational levels

Peng Zhao, Guming Zhao, Shaowei Li +2 more

The fluxonium qubit has emerged as a promising candidate for superconducting quantum computing due to its long coherence times and high-fidelity gates. Nonetheless, further scaling up and improving performance remain critical challenges for establishing fluxoniums as a viable alternative to transmons. A key obstacle lies in developing scalable coupling architectures. In this work, we introduce a scalable fluxonium architecture that enables decoupling of qubit states while maintaining tunable couplings between non-computational states. Beyond the well-studied ZZ crosstalk, we identify that always-on interactions involving non-computational levels can significantly degrade the fidelities of initialization, control, and readout in large systems, thereby impeding scalability. Based on two possible physical realizations of the architecture, we demonstrate that the issue can be mitigated by implementing tunable couplings for fluxonium plasmon transitions, meanwhile enabling fast, high-fidelity gates with passive ZZ suppression. This comparative analysis enables us to establish general principles for realizing the architecture while understanding and addressing implementation-specific challenges.

arXiv:2504.09888•Physical Review Applied•Apr 2, 2026•2 citations

Toward the Fluxonium Quantum Processor

Long B. Nguyen

This thesis reports recent achievements toward scalable quantum computing with fluxonium, a superconducting artificial atom with rich energy spectrum and selection rules similar to those found in natural atoms. We show how such spectral properties can be harnessed to protect the qubit from energy relaxation and dephasing. At half-integer flux quantum bias, we show that fluxonium’s |0〉→ |1〉qubit transition has high coherence by design, with T1, T2≈500 μs in one device, the highest reported in superconducting circuits so far. Yet, the qubit exhibits the same level of addressability found in more conventional superconducting qubits (Tgate<50 ns). In addition, a controlled-Z gate can be implemented by sending a short2π-pulse at a frequency near the |1〉→|2〉transition of the target qubit. Preliminary results suggest that this gate can be used to entangle two fluxonium qubits with high fidelity. We also discuss experimental techniques employed to characterize the qubits, and present a perspective on future fluxonium-based quantum technologies.

•Jan 1, 2020•1 citation
Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wave functions, the sideband transitions are only enabled by multiphoton processes which require multitone or strong driving. Leveraging the flux tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a noncomputational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.
The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.
Converting quantum information from stationary qubits to traveling photons enables both fast qubit initialization and efficient generation of flying qubits for redistribution of quantum information. This conversion can be performed using cavity-sideband transitions. In the fluxonium, however, direct cavity-sideband transitions are forbidden due to parity symmetry. Here we circumvent this parity selection rule by using a three-wave mixing element to couple the fluxonium to a resonator. We experimentally demonstrate a scheme for interfacing the fluxonium with traveling photons through microwave-induced parametric conversion. We perform fast reset on the fluxonium qubit, initializing it with > 95 % ground-state population. We then implement controlled release and temporal shaping of a flying photon, useful for quantum state transfer and remote entanglement. The simplicity and flexibility of our demonstrated scheme enables fluxonium-based remote entanglement architectures. Published by the American Physical Society 2024
The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.
The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: When biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here, we describe a controlled-ZZZ gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near 500MHz500\phantom{\rule{3.33333pt}{0ex}}\mathrm{MHz}500MHz. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.
The fluxonium qubit has emerged as a promising candidate for superconducting quantum computing due to its long coherence times and high-fidelity gates. Nonetheless, further scaling up and improving performance remain critical challenges for establishing fluxoniums as a viable alternative to transmons. A key obstacle lies in developing scalable coupling architectures. In this work, we introduce a scalable fluxonium architecture that enables decoupling of qubit states while maintaining tunable couplings between non-computational states. Beyond the well-studied ZZ crosstalk, we identify that always-on interactions involving non-computational levels can significantly degrade the fidelities of initialization, control, and readout in large systems, thereby impeding scalability. Based on two possible physical realizations of the architecture, we demonstrate that the issue can be mitigated by implementing tunable couplings for fluxonium plasmon transitions, meanwhile enabling fast, high-fidelity gates with passive ZZ suppression. This comparative analysis enables us to establish general principles for realizing the architecture while understanding and addressing implementation-specific challenges.
This thesis reports recent achievements toward scalable quantum computing with fluxonium, a superconducting artificial atom with rich energy spectrum and selection rules similar to those found in natural atoms. We show how such spectral properties can be harnessed to protect the qubit from energy relaxation and dephasing. At half-integer flux quantum bias, we show that fluxonium’s |0〉→ |1〉qubit transition has high coherence by design, with T1, T2≈500 μs in one device, the highest reported in superconducting circuits so far. Yet, the qubit exhibits the same level of addressability found in more conventional superconducting qubits (Tgate<50 ns). In addition, a controlled-Z gate can be implemented by sending a short2π-pulse at a frequency near the |1〉→|2〉transition of the target qubit. Preliminary results suggest that this gate can be used to entangle two fluxonium qubits with high fidelity. We also discuss experimental techniques employed to characterize the qubits, and present a perspective on future fluxonium-based quantum technologies.