The three-level system represents the smallest quantum system capable of autonomous cycling in quantum heat engines. This study proposes a method to simulate the steady-state dynamics of a three-level quantum heat engine by designing and implementing superconducting quantum circuits. Following error mitigation, the outcomes from the quantum circuit model designed in this study, when executed on a real quantum device, closely align with theoretical predictions, thereby validating the effectiveness of the circuit model. This study offers a novel approach for investigating three-level quantum heat engines, enabling the verification of theoretical research findings while also reducing the complexity and cost of experimental procedures.
The three-level system represents the smallest quantum system capable of autonomous cycling in quantum heat engines. This study proposes a method to simulate the steady-state dynamics of a three-level quantum heat engine by designing and implementing superconducting quantum circuits. Following error mitigation, the outcomes from the quantum circuit model designed in this study, when executed on a real quantum device, closely align with theoretical predictions, thereby validating the effectiveness of the circuit model. This study offers a novel approach for investigating three-level quantum heat engines, enabling the verification of theoretical research findings while also reducing the complexity and cost of experimental procedures.
Quantum heat engines provide attractive means in quantum thermodynamics for studying the fundamentals of the flow of heat and work. Previous experimental implementations of heat engines operating at the level of a few excitation quanta have utilized external driving, which has made the observation of the produced work challenging. Conversely, autonomous quantum heat engines only require a flow of heat to operate and generate work. However, autonomous quantum heat engines have not yet been experimentally demonstrated in any system despite numerous theoretical investigations. Here, we experimentally realize an autonomous quantum heat engine based on superconducting circuits. We construct the engine circuit implementing an approximate Otto cycle by coupling two superconducting resonators with a superconducting quantum interference device, and coupling this system to spectrally filtered hot and cold reservoirs. By varying the experimental conditions, we observe coherent microwave power generation arising from the internal dynamics of the system driven only by the thermal reservoirs. Our results validate previous theoretical predictions for this circuit and pave the way for detailed studies of quantum effects in heat engines and for using heat-generated coherent microwaves in circuit quantum electrodynamics.
This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal average power is proposed and verified by the thermodynamic model. The stability of quantum circuit simulations is scrutinized through a comparative analysis of theoretical and simulated results, predicated on an orthogonal test. These results affirm the practicality of simulating quantum heat engines on quantum circuits, offering potential for substantially curtailing the experimental expenses associated with the construction of such engines.
Quantum thermodynamics sits at the intersection of quantum mechanics and thermodynamics, aiming to understand how key thermodynamic concepts such as heat, work, and entropy behave in quantum systems. A primary interest in this field is the study and development of quantum heat engines, devices that convert the flow of thermal energy into work using a quantum system as the working medium. Conventional quantum heat engines require consistent external control to drive their operating cycle. In contrast, autonomous quantum heat engines operate without such external control, instead, their cyclic behavior emerges entirely from internal dynamics and the coupling to thermal reservoirs. In this thesis, we study an autonomous quantum heat engine circuit based on superconducting quantum circuits, in which thermal noise from heat reservoirs drives cyclic energy exchange between two superconducting resonators coupled with a superconducting quantum interference device (SQUID). In this thesis, classical circuit simulations of the autonomous quantum heat engine are implemented in AWR Design Environment using lumped-element resonators, coupling capacitors, and Josephson junction models. By mapping quantum components to their classical analogues and varying the external magnetic flux threading the superconducting quantum interference device, the resonance frequencies, quality factors, and coupling dynamics of the circuit are analyzed across two parameter sets. The simulated quality factor of the second resonator exceeded the threshold required for negative dissipation in both parameter sets, consistent with conditions favorable for coherent microwave generation. Transient simulations further revealed that above a threshold drive power, energy builds up at the second resonator’s resonance frequency through SQUID-mediated coupling. This provides qualitative evidence that the classical model captures the essential inter-resonator coupling mechanism. However, systematic quantitative discrepancies in resonance frequencies and dissipation rates are identified, attributed primarily to the linearized SQUID representation used in the classical model. These results demonstrate that classical circuit simulations can qualitatively reproduce key dynamical features of the studied autonomous quantum heat engine, while also revealing the limitations of classical approximations in capturing its full quantum behavior.
Whether a heat engine can approach Carnot efficiency while maintaining finite power is a fundamental question in finite-time thermodynamics. For classical Markovian heat engines with local interactions, the power-efficiency trade-off forbids an asymptotic approach to Carnot efficiency at finite power. In quantum systems, by contrast, degeneracy, symmetry, and collective jumps have been theoretically predicted to enable such an asymptotic attainment by enhancing activity. It has remained open, however, whether this mechanism can be realized in an experimentally implementable heat engine. In this Letter, we propose a superconducting-circuit heat engine that emulates the collective enhancement, thereby enabling an asymptotic approach to Carnot efficiency at finite power. This result demonstrates that, in an implementable model, such an enhanced dissipative mechanism circumvents the power-efficiency trade-off of classical Markovian engines. Our work connects abstract bounds in finite-time thermodynamics to a concrete circuit-QED platform and suggests a route toward quantum-device design based on collectively enhanced dissipative processes.
Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.
As superconducting quantized electric circuits continue to emerge as an exceptionally versatile and powerful platform for quantum computing and other quantum technologies, they also provide a rich foundation for exploring quantum thermodynamics. The study of heat transport in these circuits offers invaluable synergy as understanding the impact of thermal fluctuations becomes increasingly important for their operation. Heat engines represent one of the most fundamental classes of thermal devices, whether regarding classical or quantum applications. Although heat transport in superconducting circuits has been extensively studied, quantum heat engines (QHE) operating at the limit of a few excitation quanta had not been experimentally realized prior to this work. These engines offer valuable insight into the quantum thermodynamics of superconducting circuits. Beyond fundamental research, the beseeching goal is to develop integrated QHEs which generate useful work in conjunction with other quantum technologies. In this context, autonomous QHEs, capable of operating without coherent external control, are particularly compelling. In this thesis, we explore thermodynamics and quantum heat engines, with a particular focus on engineering quantum heat engines using superconducting circuits as our experimental platform. The presented research includes both experimental and theoretical advancements, focusing on driven and autonomous QHEs, respectively. First, we demonstrate that engineered environments in superconducting circuits can serve as effective thermal reservoirs for externally driven quantum heat engines. Experimentally, we show that a quantum-circuit refrigerator (QCR) can be used not only for cooling but also for heating the coupled circuit. This discovery imminently leads to the experimental realization of a quantum heat engine, where a quantum Otto cycle is driven in a transmon qubit coupled to the QCR. Second, regarding autonomous quantum heat engines, we theoretically show that non-linear optomechanical coupling can eliminate the need for external driving while providing a method for directly observing the work output. These promising theoretical results suggest that the experimental realization of an autonomous QHE is ultimately a matter of careful circuit engineering. However, achieving this experimentally remains a tantalising challenge for future research, beyond the scope of the present work.